Grease Seals For a Lippert 5,200LB Axle Under a 2015 Open Range Light 311FLR 5TH Wheel
Updated 04/11/2024 | Published 04/07/2024
Products Featured in This Question
Question:
Im in need of axle seals for the Lippert 5200 lb axles on my 2015 Open Range Light 311FLR Fifth Wheel. Can you provide the seal part numbers for my application?
asked by: Dwight D
(click to enlarge)
Expert Reply:
The Lippert 5,200lb axle under your 2015 Open Range Light 311FLR 5TH Wheel is going to need 2 Seals # GS-2250DL per axle. We do have the Bearing Kit # BK3-300 which will contain the races, bearings, a seal and cotter pin for one hub. This would be good to keep on hand incase you find out any of the bearings and races are worn/damaged when you go to replace the seals.
We have the Seal Puller # PTW1219 and Install Kit # PTW83020 which will make removal and installation of the seals and races easier. We also have the Grease # L11390 that I recommend for your hubs with the Bearing Packer # PTW1218 to ensure you get grease fully pressed into the bearings before installing them
Product Page this Question was Asked From
Grease Seal - Double Lip - 2.250" ID - 3.376" OD - GS-2250DL
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.25 Inch I.D.
- 3.38 Inch O.D.
- TruRyde
more information >
Continue Researching
- Search Results: trailer leaf springs
- Search Results: leaf springs
- Search Results: 2250dl
- Shop: Grease Seal - Double Lip - 2.250" ID - 3.376" OD - GS-2250DL
- Shop: Bearing Kit, LM67048/25580 Bearings, 10-36 Seal
- Search Results: morryde trailer suspension parts
- Shop: 6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 26" Long
- Search Results: cotter pin
- Search Results: trailer bearings races seals caps
- Search Results: lm67048
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Video: Review of Dexter Trailer Bearings Races Seals Caps - Bearings - DX86ER
- Shop: Grease Seal - Double Lip - 2.125" ID - 3.376" OD - GS-2125DL
- Video: Review of etrailer Trailer Bearings Races Seals Caps - Bearing Kit - BK3-300
- Q&A: Does Changing From A 4 Leaf To A 6 Leaf Spring Add To Ride Height?
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Q&A: Replacement Wheel Bearing and Seal Kit For 2019 Heartland Torque T322 Toy Hauler 6k Axles
- Q&A: Which MORryde X-Factor Can be Used with CRE3000 MORryde Equalizer Kit 2022 Grand Design Imagine
- Shop: Bearing Kit, LM67048/25580 Bearings, GS-2125DL Seal
- Shop: RV Mattress
- Q&A: Bearing Kit Recommendation for Lippert 5,100 lb Trailer Axle
- Q&A: Are Longer U-Bolts Required for Thicker Leaf Springs
- Video: Complete Breakdown of the Dexter Trailer Axle with Idler Hubs
- Q&A: Replacement Grease Seal and Bearing Kit for a 5,200LB Dexter Axle On a 2021 Reflection 303RLS RV
- Video: Timken Grease and Oil Seal Review
- Video: Installing the Dexter U-Bolt Kit on a 2018 Grand Design Reflection Fifth Wheel
- Video: Grease Seals 10-36 (pair) Feature Review
- Q&A: Replacement Grease Seal For a Trailer Hub Using LM11949 Outer Bearing and LM67048 Inner Bearing
- Shop: Gooseneck Hitch
Dwight D.
4/9/2024
Hi Bud, Thanks for your reply. Did you mean two seals per axle or 2 per hub. Will I need 4 seals for two axles or 8?