Hey Nate, We do not have a 3/4" spindle nut or washer, the smallest option is the 7/8" spindle nut #165931and a 1" washer #SW1000. I cannot find anything smaller. Are you sure the threads on you're spindle are 3/4"? If they…
Hey Eli! The first thing you want to do is make sure you have brake flanges on those axles. You also need to take a look at the axle tags and find the axle capacity. More than likely they're 3,500 lb axles so I'll answer based on that. If you…
In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
A trailer that is over 80 inches wide is required by DOT regulations to have rear clearance lights. An over 80 inch taillight kit, like part #TL16RK, will have the side clearance light built into it. An under 80 inch taillight does not have the…
Hey Arkadius, welcome back! Yes, the ducted version of the Chill Cube comes with a remote. However, you're going to need the complete system for a replacement. You can choose from the following based on color: -Furrion Chill Cube RV Air…
If you're wanting to replace just the rooftop unit then you'll first want to remove the cover of your air distribution box to take a look at the controller. The controller will have a wire harness that hangs down from the rooftop unit and…
Hey Ed, yes the solenoid of the reverse lock out is going to click when it is activated. You would definitely be able to hear it too. Have you tried this already?
The light dimensions of the Optronics LED #TLL12RK are 7-9/16" long x 2-3/4" tall x 1-3/4" deep and the hole size needed is 6.75" by 2.5 inches. I confirmed this with my contact at the manufacturer and I've attached a template…
Hey Glen. We've got a couple of options for Optronics Smoke Series lights but we don't have the STL87DSRSHB which is a part number for a 10 pack. It looks like Optronics is phasing out the STL87 smoke series as well so I can't get them.…
The Wesbar 271594 is a sealed light which means the lens is not replaceable. The only solution is to replace the entire light. The parent company for Wesbar recently changed, so as of May 2023 this particular light is on indefinite backorder. I…
Hey Rick. Unfortunately that's correct the Wesbar Tail Light 271594 has been discontinued. Our best option for replacing it is the LED Trailer Tail Light item #STL36RB for the passenger side and item #STL37RB for the driver side. The Wesbar light…
Hey Harry, thanks for reaching out. Your Coachmen Freedom Express is set up for 30 amp service and we do have twist lock power inlets that will work for you. What you'll need is one of the following: - Mighty Cord Replacement RV Power Inlet -…
Hey Nate, We do not have a 3/4" spindle nut or washer, the smallest option is the 7/8" spindle nut #165931and a 1" washer #SW1000. I cannot find anything smaller. Are you sure the threads on you're spindle are 3/4"? If they…
Hey Eli! The first thing you want to do is make sure you have brake flanges on those axles. You also need to take a look at the axle tags and find the axle capacity. More than likely they're 3,500 lb axles so I'll answer based on that. If you…
In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
A trailer that is over 80 inches wide is required by DOT regulations to have rear clearance lights. An over 80 inch taillight kit, like part #TL16RK, will have the side clearance light built into it. An under 80 inch taillight does not have the…
Hey Arkadius, welcome back! Yes, the ducted version of the Chill Cube comes with a remote. However, you're going to need the complete system for a replacement. You can choose from the following based on color: -Furrion Chill Cube RV Air…
If you're wanting to replace just the rooftop unit then you'll first want to remove the cover of your air distribution box to take a look at the controller. The controller will have a wire harness that hangs down from the rooftop unit and…
Hey Ed, yes the solenoid of the reverse lock out is going to click when it is activated. You would definitely be able to hear it too. Have you tried this already?
The light dimensions of the Optronics LED #TLL12RK are 7-9/16" long x 2-3/4" tall x 1-3/4" deep and the hole size needed is 6.75" by 2.5 inches. I confirmed this with my contact at the manufacturer and I've attached a template…
Hey Glen. We've got a couple of options for Optronics Smoke Series lights but we don't have the STL87DSRSHB which is a part number for a 10 pack. It looks like Optronics is phasing out the STL87 smoke series as well so I can't get them.…
The Wesbar 271594 is a sealed light which means the lens is not replaceable. The only solution is to replace the entire light. The parent company for Wesbar recently changed, so as of May 2023 this particular light is on indefinite backorder. I…
Hey Rick. Unfortunately that's correct the Wesbar Tail Light 271594 has been discontinued. Our best option for replacing it is the LED Trailer Tail Light item #STL36RB for the passenger side and item #STL37RB for the driver side. The Wesbar light…
Hey Harry, thanks for reaching out. Your Coachmen Freedom Express is set up for 30 amp service and we do have twist lock power inlets that will work for you. What you'll need is one of the following: - Mighty Cord Replacement RV Power Inlet -…
Illuminate Your Trailer with Optronics Oval Lights
Optronics oval trailer lights are a top choice for enthusiasts seeking reliable, bright, and easy-to-install lighting solutions. Perfect for upgrades or replacements, these lights fit standard grommets and brackets, offering a seamless fit and enhanced visibility for your trailer adventures.
Optronics oval lights are known for their brightness and ease of installation. They fit standard grommets and brackets, making them a perfect upgrade for trailers needing better visibility. Their LED technology ensures long-lasting performance, even in challenging conditions.
These lights are designed to be waterproof, making them ideal for trailers that may encounter wet conditions. Many have reported that even after submersion, the lights continue to perform flawlessly, thanks to their sealed design that prevents water intrusion.
Yes, they are often a perfect fit for older trailers. They match standard sizes and can replace older lights without much hassle. However, some modifications might be needed for wiring, but the end result is a brighter, more reliable lighting system.
Installation is straightforward and typically requires basic tools. An 8-32 machine screw is often used for mounting. While some might need to adjust for wire placement, the process is generally simple and results in a secure, flush mount.
These lights provide excellent brightness for tail, brake, and backup functions, enhancing visibility on the road. Their LED technology ensures they are visible even in daylight, reducing the risk of accidents and improving overall trailer safety.
Clearance Lights
Interior Lights
Reflectors
Tail Lights
Utility Lights
Filters
