LED Trailer Tail Light w/ Flange - Stop, Turn, Tail - Submersible - 6 Diodes - Oval - Red Lens

Video Transcript for Review of Optronics Trailer Lights - Red Tail Light - STL73RB

Today, we're going to take a look at the Optronics Submersible Oval Three Function LED Trailer Tail Light. Now, this oval tail light will provide three functions, stop, turn, and tail light functions. It is a durable polycarbonate housing and lens, and it's sonically sealed waterproof housing and lens unit is submersible. It's a red lens over six white LEDs. And what's nice is the LEDs make great replacements for incandescent lights because they'll last 50 times longer. They are more efficient.

They'll provide brighter light with less power output. And, of course, no bulbs to replace, no brittle filaments to break. This light is compatible with 12 volt DC systems, and it is a surface mount design. You can see it has built-in mounting flange with the mounting holes in it. Now, the hardware to install this is not included.They do also offer a snap-on reflector trim ring that you can put onto this light.

We do sell it separate on our website. And if you snap that reflector ring on that, you don't have to have a separate reflector mounted on your trailer.This is a three-wire design, hardwires to the trailer. The black wire is for the tail light. White is for the ground and the red is for your brake and turn signal. Now, at the end of this video, I am going to hook this up to some power, just to show you how bright the light is and how it operates.

This light is DOT, Department of Transportation, compliant. Power draw at 12 volts for the stop and turn signal is 0.161 amps. Tail light is 0.007 amps.Give you a few dimensions on this. The overall dimension, including the mounting flange, going to be right at seven and a half inches long. Height of it is three and five-sixteenths inches tall, and the depth of it is right at seven-eighths of an inch.

Just the light itself, the length is six and three-eighths inches. Height is two and one-eighths inches.What we're going to do now is hook these wires up. We'll go ahead and take the tail light. Go ahead and hook that up. Go ahead and hook our ground up, and we'll go ahead and hook our brake and turn signal. With those all hooked up, we'll go ahead and turn on our power, and you can see with the power on, there's your light. What I am going to do is go ahead and turn off the overhead lights. With the overhead lights off, you can see there is your tail lights. And then when you hit your brakes, you can see how brighter they get. And then if you do your turn signal, that would be your turn signal. Again, you can see the six LEDs. Go ahead and turn back on our overhead light. Turn off our power.But that should do it for the review on the Optronics Submersible Oval Three Function LED Trailer Tail Light..