Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
3-3/4" x 1-13/16" Oval. Low-profile trailer light serves as either a side marker or clearance light. Built-in reflex reflector. Snap-on polycarbonate lens. Surface mount - hardware not included. 2-Wire design. P2 rated.
Features:
Specs:
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the trailer.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (111 Customer Reviews)
3-3/4" x 1-13/16" Oval. Low-profile trailer light serves as either a side marker or clearance light. Built-in reflex reflector. Snap-on polycarbonate lens. Surface mount - hardware not included. 2-Wire design. P2 rated.Exact light replacement. Excellent quality and fast delivery. Dry pleased with this purchase and I will continue to use and recommend etrailer for trailer supplies!!!
Worked as expected. Easy replacement! Fast shipping!
Perfect replacement for the Forest River 2018 ultralight marker light.
Installation was easy. The fit and design matched the original. After a year, the light still works perfectly. My only regret is that I waited so long to replace the original broken light.
Fit a 2020 Rockwood MiniLite 2511S with no issues.
Similar to OEM Winnebago View clearance light
Fits my Winnebago View perfectly.
I bought 3 of these marker lights to replace the original clearance lights on my RV since they were more or less the same size. With only one diode (many of my other marker lights have between 4 - 15) I was initially concerned about their brightness, but once installed I was happy with the amount of light they emit.
Fast delivery. Item matched the lights on my RV. Thanks
Customer service is the best, the product is great too.
Just what l needed
Just what I expected! Perfection Thank You
Great customer service and order came extremely promptly!
These led marker lights were the perfect replacement for my 17 year lights on my motor home. E trailer on hand is the slowest in processing the order and getting it out to the customer.
Mike
5/4/2023
A year later and they are working like new. No problems what so ever.
I was very happy to find this reflector because the ones made by glo brite, which are used on the Winnebago Navion and Views,are no longer made. This one looks like it will be a very good match!
Excellent ease of ordering and excellent customer service from etrailer.
Identical replacement!
Danronics
5/6/2022
1 year, still works perfectly
Part was correct and I received it quickly. Have used e-trailer many times and always a +.
Good selection and prices. Arrived promptly. Would be nice to get a tracking number
Somewhat tricky to replace the "Brite" oval lights on my Itasca Navion. I recommend that you cut the wires to the existing light as close to the bulb as possible to give the most to work with. I used blue crimp connectors and existing holes by angling the mounting screws. Looks very similar to the OEM lights in the daytime. I haven't compared the lights at night.
Great customer service and fast delivery
Looks like the perfect parts.
Like the brightness and look. Only complaint would be the foam gasket instead of rubber. When I drilled out the mounting holes, the foam wrapped around the bit tearing the foam. Another idea would be to have holes in the gasket lining up with the mounting holes.
I bought these a year ago to replace the side rear markers on my Navion. The ones I had, used flashlight type bulbs that were on sometimes, sometimes not. I had to rap them with my knuckle and they be on for awhile again. These lights are led and are almost the same size as the ones I replaced. I had to drill a second hole though because the holes did not line up. My old lights could be seen and whether they were lit from my rear view mirrors, and I looked all the time since they were faulty. The new ones can be seen, but you can’t tell if they are lit in the daytime, but I figure they are since they are new and led.
prefect match for my trailer
I bought these optronics marker lights for my Winnebago View a year ago, but needed to replace one. They were still available, so I got a couple, to have a spare one, in case I may need it later. They are an almost perfect replacement for the original marker lights on the back end of the RV. Kathy was very helpful in filling my order.
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Dave
5/12/2024
The replacement light has been working perfectly. It was an exact replacement. Identical in every aspect. Could not be happier with it. When I got the trailer the light was bad due to an insect building a nest in it. The moisture fried the circuit board. I made sure that this would not happen to this light by taking extra care to seal the light fixture properly.