Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW
(598 reviews)
Price: $624.95
In Stock
Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW
Item # FA92-00-1000
Retail:$946.59
Our Price: $624.95
You Save: $321.64
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (598)
- Q & A (0)
- Photos
Fastway Weight Distribution Hitch - FA92-00-1000
- 800 lbs
- 900 lbs
- Fits 2 Inch Hitch
- WD With Sway Control
- Allows Backing Up
- Fastway
- Electric Brake Compatible
- Surge Brake Compatible
- Some Sway
Two points of steel-on-steel friction work to prevent and correct trailer sway in this weight distribution system. Sway control brackets help to ensure that your trailer stays in line with your tow vehicle. Adjustable shank included.
Features:
- Evenly distributes weight over axles of tow vehicle and trailer for stability and control
- Creates a level ride for both tow vehicle and trailer
- Integrated 2-Point Sway Control limits side-to-side movement
- Brackets keep spring bars in place for a rigid system that holds trailer in line
- Steel-on-steel friction helps to minimize sway caused by winds or sudden maneuvers
- No lift chains - eliminate unwanted movement
- Unique design makes system compatible with surge-type brake actuators
- Trunnion spring bars flex for a controlled, even ride
- No-drill, clamp-on brackets can be adjusted along the trailer frame
- Accommodates frame-mounted items such as gas tanks, battery boxes, toolboxes, or generators
- Desired tilt is achieved with traditional washer design
- Add or remove washers from spacer rivet to tilt head up or down
- Powder coated steel construction is durable and corrosion resistant
- Snap-up lever eases installation by reducing lifting required by trailer jack
- System includes head assembly, adjustable shank, spring bars, sway control brackets, lift handle, pin and clip, and all necessary hardware
- Hitch ball sold separately - requires 1-1/4" diameter shank
- 1-7/8" Thin walled socket (EQ70-00-4800 - sold separately) recommended for hitch ball installation
Specs:
- Tongue weight: 600 lbs - 1,000 lbs
- Gross towing weight: 10,000 lbs
- Fits: 2" x 2" trailer hitch receivers rated for use with weight distribution systems
- Sway control bracket positioning: 27" - 30" back from center of coupler
- Maximum trailer frame height: 6"
- Shank length:
- 8" From center of hitch pin hole to center of adjustment holes
- 9" From center of hitch pin hole to front of shank
- 7" From center of hitch pin hole to back of shank
- 12" Overall
- Total height adjustment along shank: 7-1/2"
- Maximum rise: 6-1/4"
- Maximum drop: 2-3/4"
- Overall height: 8-1/2"
- Holes are spaced 1-1/4" apart on center
- From the center of the pin hole to the center of the ball: 12"
- 10-Year warranty
| Included w/ System | Required - Sold Separately | Optional Add-Ons |
|---|---|---|
|
| n/a |
Create a more stable ride for your tow vehicle and trailer with a weight-distribution hitch. Adding spring bars to your towing system applies leverage, which transfers the load that is pushing down on the rear of your vehicle to all the axles on both your tow vehicle and your trailer, resulting in an even distribution of weight throughout. The result is a smooth, level ride, as well as the ability to tow the maximum capacity of your hitch.
Selecting a Weight-Distribution System
The tongue weight rating is the most important factor in determining which size weight-distribution system you should use. If the bars of the system you choose are rated too high for your setup, they will create a rigid ride, which can result in a bouncing trailer. If, on the other hand, the bars are not rated high enough, the system will be unable to properly distribute the weight, rendering it virtually useless.
To determine the proper weight rating for a weight-distribution system, you must first determine your trailer's tongue weight. Then add to that the weight of the cargo behind the rear axle of your tow vehicle. These two measurements make up the tongue weight rating for a weight-distribution system.
Fastway e2 Sway Control
The two points of sway control within the e2 are created by the steel-on-steel friction that occurs when the spring bars slide within the L-brackets that are mounted on the trailer tongue. Most traditional weight-distribution systems have spring bars that are suspended by chains. Although this ensures that the system is not so rigid as to create bounce in the trailer, it also allows a good deal of side-to-side play in the system.
The direct friction that is applied to the spring bars in the e2 system helps to stop sway once it has begun. The concept is similar to the way in which an add-on friction sway control device functions. When each spring bar moves forward or backward, or side to side, it rubs along the bracket, creating friction. The resistance created by this action limits the movement of the spring bar, thus preventing further side-to-side movement of the trailer.
Most add-on units feature some sort of friction material similar to that used in automotive brakes. But the e2 uses direct steel-on-steel contact to create resistance. This is the same sort of friction that is used with locomotives that pull loaded railcars weighing tons. No additional materials are needed. The steel will outlast any of those other materials, providing an extremely durable, functional sway-control system.
92-00-1000 Fast Way e2 Weight-Distribution Hitch - Trunnion Bar - 10K
Installation Details
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Did not arrive in time
- Wrong item was ordered
Customer Reviews
Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW - FA92-00-1000
Average Customer Rating: 4.7 out of 5 stars (598 Customer Reviews)
Two points of steel-on-steel friction work to prevent and correct trailer sway in this weight distribution system. Sway control brackets help to ensure that your trailer stays in line with your tow vehicle. Adjustable shank included.by: Craig08/22/2023
I bought this Trunnion hitch specifically for weight distribution as I have a lot of tongue weight on my trailer. It does a great job of putting some of that weight back on the trailer. You must check the tension bolt before every trip as it work’s loose and could ruin your day if it came out.
by: Steve04/12/2018
Very happy with the product quality, instructions, and performance of the hitch system. I would highly recommend to anyone needing this type of hitch.
by: Anthony12/06/2020
etrailer service is great and the customer service is awesome. The only gripe is the packaging and is not really etrailers fault. UPS ans Fed Ex beat the living daylights out of thier shipments. I am lucky to have all the parts and the hitch was scratched up pretty bad from the abused shipping. Maybe if the boxes were shrink wrapped they would hold up better in shipment. Very fast shipping and I will be using etrailer in the future!
by: Mark J.07/06/2016
Fantastic hitch but make sure you take some time to get it set up. I had to assemble/disassemble/reassemble it a few times to get it set up correctly. Also, I had to go to my local trailer shop to properly torque the hitch ball. Not only did I not have a 1 7/8" socket, but I couldn't torque it to 450ft lbs.
Now that it is installed and dialed it it works great.
by: Daniel03/19/2013
They work great. It took awhile to find a wrench big enough to install the 2 5/16in ball hitch and the parts associated with this system. I didn't have any sockets that size. But, after about two hours, everything was working great.
by: Kenneth10/28/2020
I am very pleased with my Fastway Weight Distribution System. This order was delayed due to the supplier having problems delivering the product but Noahe kept me informed during the hole process. I will definitely purchase items from etrailer in the future.
by: Pat06/28/2018
Excellent customer service and very helpful in making a decision about the correct hitch. Delivery was fast and followup by Madison was perfect. Pat R
by: Tate 10/29/2020
etrailer had always been great to work with. When the package tracking hadn’t updated in a few days the CS at etrailer assured me everything was good. Sure enough that same day the tracker showed that my package was only 3 hours away and would be here the next day.
The e2 hitch is really easy to set up and I’m very pleased with my purchase and would go through etrailer agin to purchase it.
by: Daniel 06/29/2023
Looks good so far I haven't tried it out
by: Peter11/23/2018
Love it! Easy to follow install instructions. Simple / quick hook up and removal.
Fortunately we recieved all parts as the box was completely blown out upon arrival with bolts, washers, and trunnion bars falling out across my driveway. UPS really does not care about the cargo they carry, but I know if parts were missing that etrailer would make it right!
by: Pat 11/30/2021
Ease of installation
by: Ronald06/06/2021
Would not pull a trailer without it. Easy to install, easy to use. No sway with this hitch.
by: Matt L. 08/30/2018
Works great. Leveled out my 1/2 ton pickup pulling my Ice Castle. Installs rather easily. Excellent product.
by: Eric Morris10/11/2019
Excellent - Works great and etrailer is a excellent company to deal with. Appreciate the customer service!!
by: Jacob wes09/07/2018
Customer service was excellent and helped with questions I had. The hitch was exactly as described.
by: Darius11/15/2019
Been using this for about a year, no issues at all. It is a little loud, but i understand most of them are. great product.
by: Nathan Skinner 03/31/2019
Great product! !! Easy to install and made towing the vehicle a lot easier.
by: Aaron F10/08/2012
Very happy with the product so far, very easy to assemble.
by: Eric11/12/2020
Great help ordering and quick shipping!
by: Jason 01/13/2022
Fixed my dangerous sag issue on my Tahoe. Would recommend!
by: Joseph 05/20/2023
by: Andrew 09/02/2022
by: Nuke03/28/2024
I bought the hitch to tow our Winnebago 2108 DS, which has a dry hitch weight of 436 lb (~559 lb gross). So I bought the FA92-00-0600 model. Our tow vehicle is a GMC 1500. I followed Fastway’s instructions for setting up the hitch. At first glance, they seem a bit technical, with measuring the front of the vehicle, etc. But it was really pretty straightforward. I used the recommended 6 washers and it was perfect. I used my torque wrench, except for the ball – I just gave that everything I had. I am an amateur mechanic, and I found the hitch to be well-engineered and well-built. Definitely a quality product. Towing is inherently dangerous overall and can be stressful if not done right. So quality was important to me for a component that is so critical to the experience.
My experience towing was that I was pleasantly surprised. There is no sway. No noise. We can go 80 mph on the freeway. We go off-highway a lot. My wife noticed the lack of paint where the bars rub, but that is the way that the friction joint was designed to work. The only weird thing for me was using our trailer’s electric tongue jack to lift the front of the trailer and rear of the truck at the same time to install the bars. I wasn’t sure the jack was designed to do that, but it seems to work just fine.
by: James12/30/2018
The solution to dangerous issues. This system resolved many of my towing issues. I tow a food trailer. The hitch sagged and the lowered hitch raised the front end of my SUV. I also experienced sway and buffeting when tractor-trailers passed. Windy, wet nights and big trucks were white-knuckle drives. NO MORE.
Nobody does it better than etrailer! They answer their phone! They are truly knowledgeable about their products and care about their clients. My first call directed me to my precise options. I ordered it on-line and it arrived a day ahead of schedule. I watched their exceptional installation video three times before attempting installation. This is what sets ET apart. They did not have one video - they had two - one for a truck and one for an SUV / VAN. What was not covered in the videos was only a call away. PAY ATTENTION HERE: The rig uses a set of stacked-washers to adjust the "angle" of the hitch ball. The more washers you use - the greater the angle and the higher the tension of the torsion bar. If you begin with too many washers, you may find that after you use the provided torsion bar installer (a variant on a crow-bar) to install your torsion/control-bars. YOU MAY NOT BE ABLE TO GET THE BARS BACK OFF! That was my case. And if you cannot get the bars off - you cannot remove the tow vehicle. I had no idea how to release all of that pressure without potentially hurting myself. Ugh. ONE CALL - THAT'S ALL! A quick call to ET. The rep understood my problem but he also understood that mine was a dangerous issue and sought additional help internally. He came back with "...this is going to sound odd but trust me. Chock your wheels. Raise your tow vehicle from the center of the tow bar until you raise your rear wheels off of the ground and until you can move the bars manually (a light tap with a hammer is a good indicator as to whether you have relieved enough pressure by raising the tow vehicle). When you can swing the bars manually - swing them out and away from the trailer and if you swing them far enough toward the tow vehicle, they will simply fall out of their socket. (There is also a release tab you can pull out - but I prefer this method.) It WORKED!
Adjusting this type of system can be an arduous task that is well worth the effort and no company does a better job of selling, educating and servicing than ET. My local tow shop wanted to install a "chain" system without sway control and when I asked him what he thought of the "bar" systems - he said, "...hmm, I've never seen those before". Go with the experts and your own mechanical expertise. ET has your back.
by: Kean08/31/2020
Installed the Fastway E2 hitch on an 2019 F150 to tow a 19 ft travel trailer (E-Pro 19FD) which has 480 ibs tongue weight, trailer loaded is about 3800 lbs. I towed a few trips without a WDH and there was an annoying "bounce" or teetering at the hitch point (on roads that were not perfectly smooth) and a small amount of sway at highway speeds. I Just finished testing and the hitch reduced the bounce and sway and improved overall handling. I did have a problem with the UPS delivery and Nicol T at etrailer immediately got it straightened out and I called customer support with an install question and they were also excellent. My truck already had the timbrem SES rear suspension kit and I needed to know if that changed the install process (since the bed of the truck will not go down once the bumpers is on the axel - about 1 inch). Anyone installing this hitch - watch the install video along with the instruction manual...
25
596
Show More Reviews
See what our Experts say about this Fastway Weight Distribution Hitch
- Does Weight Distribution System for 2008 Ford Explorer Increase Towing CapacityThe GCWR is the total allowable weight of your fully loaded 2008 Ford Explorer and travel trailer so the hitch weight (tongue weight) would not factor into that. If you looked in your owner's manual and are sure that your GCWR is 15,000 lbs, that would be the total weight that your loaded vehicle and trailer could weigh; additionally, tongue weight does not factor into payload capacity, and a weight distribution system does not factor into the tongue weight. What you need to do is make...
view full answer... - How to Pick Out Weight Distribution for Cougar Travel TrailerThe best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use. Once you know your tongue weight...
view full answer... - Can A Weight Distribution Hitch Be Used On A 2022 Ram 2500 With Auto-Leveling Rear SuspensionYes, you can still use a weight distribution hitch even though your 2022 Ram 2500 has an auto-leveling rear suspension. You'll want to first hookup the trailer to your Ram, let the suspension system auto-adjust, and then you can finish hooking up the bars on the WDH. If you need help picking out a good weight distribution hitch, like the Fastway e2 Weight Distribution w/ 2-Point Sway Control # FA92-00-1000, I'll just need to know the tongue weight or GVWR of your trailer and whether you're...
view full answer... - Can the 4,500LB Fastway e2 Weight Distribution Be Upgraded For Towing a Larger Trailer? You are going to need to replace your entire hitch with either the 6,000LB # FA92-00-0600 or 10,000LB # FA92-00-1000 Fastway e2 weight distribution hitches for towing a larger trailer. The 4,500LB # FA92-00-0450 hitch you have uses lighter duty components which are specific to this hitch and you cannot upgrade the parts of the hitch to tow heavier trailers. The 6,000LB Hitch # FA92-00-0600 is rated for a tongue weight of 250-600lbs while the 10,000LB Hitch # FA92-00-1000 is rated for...
view full answer... - Best Fastway e2 Weight Distribution System For Trailer with 795 Lb Dry Tongue WeightThe Fastway e2 Weight Distribution System is an excellent choice so if this is a system you are interested in I would not hesitant as it has exceptional sway control and it comes with a ten year warranty so you know it will last. That said, if you have a dry tongue weight of 795 lbs, I recommend the part # FA92-00-1200 which is rated for up to 12,000 lbs gross trailer weight or 1,200 lbs tongue weight. The part # FA92-00-1000 or part # FA94-00-1000 which is rated for up to 10,000 lbs gross...
view full answer... - Which Fastway Weight Distribution System for Trailer with 600 to 800 lbs Tongue WeightIf you go with a weight distribution system that is rated too high for the trailer being towed you'll end up with a really harsh ride quality. So based on knowing your tongue weight will be between 600 and 800 lbs the best Fastway weight distribution system is the Trunnion e2 part # FA92-00-1000 which has a tongue weight range of 600-1,000 lbs. If instead you were wanting an Equal-i-zer the kit you'd want is the part # EQ37100ET which has the same weight range but has a better sway control...
view full answer... - Parts Needed to Convert Fastway e2 Round Bar Weight Distribution Hitch to TrunnionIn order to convert your Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 2-5/16" Hitch Ball - 10K GTW # FA94-00-1061 to the trunnion style like the # FA92-00-1000 you will not have to purchase an entire system. The brackets and the shank can carry over so purchasing the spring bars and head would be the way to go. For the head you need the Replacement Head for Fastway e2 Weight Distribution Systems - Trunnion Bar # FA92-02-1255. Then for the bars you need the Replacement...
view full answer... - Availability Of Replacement Spring Bars For Older Draw-Tite Weight Distribution HitchI may have an option for you, but there is not a 1000lb spring bar like yours made. All of the 1000lb ones were discontinued back in 2019. The only replacement spring bar still available that will fit your weight distirbution hitch head is the Reese # RP58114 which works with tongue weights between 400-800lbs so it will be a bit lighter than your current spring bars. I recommend measuring your tongue weight using either the etrailer tongue weight scale # e99044, or one of the methods...
view full answer...
- Can You Back Up With The Curt Trunnion Bar Weight Distribution Hitch C24UR?If the Curt Trunion Style Weight Distribution Hitch # C24UR is used without friction sway bars it does allow backing up and sharp turns, however it is recommended to use at least one friction sway bar # 17200 which makes it where you can NOT back up with the hitch hooked up. Instead of this hitch I recommend the Fastway e2 # FA92-00-1000 which has built in two point sway control that does allow backing up and sharp turns. This hitch is a favortie of our staff and installers, and works...
view full answer... - Availability of 2-1/2" Weight Distribution Shank That is 12" Long for Fastway SystemIf you are just looking for a typical shank for your Fastway # FA92-00-1000 or # FA94-00-1000 weight distribution (WD) system then the closest thing we have which will fit your 2-1/2" receiver is the shank # EQ90-02-4900, but it will only extend the WD head out 9". We do have the Curt shank # C17122 which sticks out 14" but it is for a 2" receiver so you would need to use your adapter like part # C45405. Another option is to use the Gen-Y Torsion Weight Distribution Shank # 325-GH-1102....
view full answer... - Recommended Weight Distribution/Sway Control System for 7000 lb Travel TrailerFor travel trailers, I highly recommend going with a weight distribution system that incorporates a sway control function. This is very important because travel trailers are very susceptible to trailer sway caused by crosswinds and turbulence from passing traffic. If you haven't ever towed a trailer that started uncontrollably swaying on you, it's a very bad experience that I'd like to see you avoid. The 535 lb tongue weight figure you mentioned represents the dry tongue weight of the...
view full answer... - Shank for Fastway Weight Distribution that Can do 4 inches of DropThe Fastway weight distribution system you have part # FA92-00-1000 can do a drop of up to 1 inch, so for a shank that works with this system and can do a drop of up to 5-1/2 inches of drop you'd want the part # FA92-02-4214.
view full answer...
- Replacement Spring Bar Arm for 1,000 Pound Tongue Weight Fastway e2 Weight Distribution SystemTo replace a spring bar arm on your Fastway e2 Weight Distribution System, Trunnion # FA92-00-1000 you will want to use the Replacement Trunnion Spring Bar for Fastway e2 Weight Distribution Systems # FA92-02-1099. This is the correct replacement spring bar arm for your 1,000 pound tongue weight, 10,000 pound gross towing weight system. The # FA92-02-1099 replacement arm will work on either side of the trailer, it is not specific to a particular side.
view full answer... - Availability of the Fastway Weight Distribution with 10,000 Gross Trailer Weight Trunnion StyleI have a solution for you. We carry the Fastway e2 # FA92-00-1000 which is the same weight hitch that you referenced without the trailer ball. All you will need is # EQ91-00-6100 trailer ball with the this Fastway hitch.
view full answer... - Is Equal-i-zer EQ90-02-4900 Shank Compatible With Fastway FA92-00-1000 Weight Distribution KitIt sure will! The Equal-i-zer # EQ90-02-4900 shank for 2-1/2 inch receivers would indeed be compatible with the Fastway e2, part # FA92-00-1000. The shank offers up to a 10 inch rise or a 6 inch drop. If you click the provided link, you can see a product description video featuring the # EQ90-02-4900 shank.
view full answer... - Recommended Fastway e2 Weight Distribution System for 24 Foot Travel TrailerThe correct Fastway e2 hitch for your needs will depend on the fully loaded and ready to tow tongue weight of your travel trailer. This should also include the weight on anything stowed in the truck bed behind the rear axle. I'll link you to an article that shows a couple of different ways to determine this, but the easiest way would be to use a tongue weight/payload scale like the etrailer # e99044. If your tongue weight is less than 600 lbs, use # FA92-00-0600. If it's between 400-800...
view full answer... - Fastway Weight Distribution for Apex Nano 185 BHThe # FA92-00-1000 would be rated too high for the weight of your camper which means it would give you a really harsh ride quality. A better choice would be the # FA92-00-0600 which is the exact same system but with a lower tongue weight range of 250 to 600 lbs.
view full answer... - Can Timbren System be Used with Fastway Weight Distribution SystemYou can use a weight distribution system like the Fastway # FA92-00-1000 with a Timbren kit and they will work great together. You will actually end up using less spring bar tension from the WD system though as you'll basically need to go through the entire setup process for setting the spring bar tension for now that you have additional rear suspension support.
view full answer... - Dimensions of Equal-I-zer Replacement Sway Control Bracket I have attached photos showing the dimensions of the Replacement Sway-Control Bracket # EQ95-01-5600. The larger, L-shaped bracket measures 10 inches long x 2 inches wide and the smaller brackets measure 8-1/4 inches long x 1-1/2 inches wide. These brackets are designed to work as replacements for the Fastway e2 Weight Distribution System # FA92-00-1000 so they will work well for you. They are designed to fit trailer frames up to 6 inches tall.
view full answer...
- How to Choose the Best Fastway Weight Distribution Hitch for a 7000-lbs GVWR TrailerI'll start this off by saying that you are correct in saying that you generally want your tongue weight to be between 10-15% of the total weight of your fully loaded trailer. The overall capacity of the hitch is really not nearly as important as the tongue weight range, and when you're choosing a weight distribution system you want that tongue weight to be towards the middle of the tongue weight range prescribed for that particular weight distribution system. It should also be noted that...
view full answer... - How to Lower a Weight Distribution System After Adding a Leaf Spring to the Towing Vehicle If adding the spring did get the vehicle level, but has messed with how the trailer sits, you can add a shank that will sit lower than the one that came with your weight distribution system. I suggest going with the Reese # RP69FR as this will have up to 4 inches of drop as opposed to the stock 1 inch drop. This is also rated up to 1,200 pounds of tongue weight.
view full answer... - How To Prevent Suspension Sag On 2019 Nissan Armada W/ Auto Leveling Suspension When TowingI have another option for you, but the Firestone Coil-Rite # F4150 you were looking at are not compatible with the Auto Leveling shocks on your 2019 Nissan Armada. Using the two together causes issues when the factory shocks try to level your Armada. The only option to prevent sag is going to be using a weight distribution hitch, as there is no other rear suspension enhancement options for your vehicle. What a weight distribution hitch does is distributes the weight of the trailer from...
view full answer... - Recommended Weight Distribution System for 2018 Prime Time ATI Avenger Trailer When picking out a weight distribution system it is important to determine your total tongue weight, which is the loaded tongue weight of the trailer plus any additional cargo weight coming from behind the rear axle of your Silverado. Ideally this number falls comfortably within the operating range for the system you choose. If the 658 pound tongue weight you mentioned is with the trailer loaded I recommend taking a look at the Fastway e2 Weight Distribution System # FA92-00-1000. The...
view full answer... - Can A Weight Distribution Hitch Be Used On Trailer With Straight Tongue?There sure is! What you will need is a pole tongue adapter like the Pole-Tongue Adapter for Equal-i-zer Weight Distribution Systems - 14,000 lbs GTW, 1,400 lbs TW # EQ95-01-5950 which will allow you to use a Equal-i-zer or Fastway e2 weight distribution system. To find the correct weight distribution system you will need to determine the total tongue weight of your setup which is the tongue weight of your fully loaded and ready to tow trailer plus the weight of any cargo added behind...
view full answer...
Do you have a question about this Weight Distribution Hitch?
Info for this part was:
Updated by:
Dan D
Updated by:
Adele M
Updated by:
Kathleen M
Updated by:
Shelly K
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Hannah L
Updated by:
Mike S
Updated by:
Carrie F
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Expert Research:
Sarah H
Expert Research:
Victoria B
Written by:
Lindsey S
Video by:
Joshua S
Video by:
Dustin K
Video by:
Zach D
Video Edited:
Jacob T
Video Edited:
Chris R
Installed by:
Cole B
Installed by:
Randy B
Installed by:
Hayden R
Installed by:
Michael B
Test Fit:
Ryan G
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Steve
4/15/2019
Great, no complaints, durable, and reliable, used my 3/4 drive socket set for installation