Blue Ox 2-Point Weight Distribution w/ Sway Control - 6-Hole Shank - 10K GTW, 1.2K TW

Blue Ox Weight Distribution Hitch - BLU75FR

The rigid brackets in this weight distribution hitch provide steel-on-steel friction to help keep your trailer in line. Ultimately, this helps to prevent and correct sway for a smooth ride. Adjustable shank and 2-5/16" hitch ball included.

Features:

• Weight distribution hitch evenly distributes weight over axles of tow vehicle and trailer for stability and control
  • Creates a level ride for both tow vehicle and trailer
• Built-in, 2-point sway control limits side-to-side movement
  • L-brackets keep spring bars in place for a rigid system that holds trailer in line
  • Steel-on-steel friction helps to minimize sway caused by winds or sudden maneuvers
  • No lift chains eliminate unwanted movement
• Round spring bars flex appropriately for a controlled, even ride
• No-drill, clamp-on brackets can be adjusted along the trailer frame
• Powder coated steel construction is durable and corrosion resistant
• System includes head assembly, adjustable shank, hitch ball, spring bars, sway control L-brackets, and all necessary hardware

Specs:

• Tongue weight: 800 lbs - 1,200 lbs
• Gross towing weight: 10,000 lbs
• Application: 2" x 2" trailer hitch receivers rated for use with weight distribution systems
• Ball size: 2-5/16"
• Limited lifetime warranty

Create a more stable ride for your tow vehicle and trailer with a weight distribution hitch. Adding spring bars to your towing system applies leverage, which transfers the load that is pushing down on the rear of your vehicle to all the axles on both your tow vehicle and your trailer, resulting in an even distribution of weight throughout. The result is a smooth, level ride, as well as the ability to tow the maximum capacity of your hitch.

Selecting a Weight Distribution System

The tongue weight rating is the most important factor in determining which size weight distribution system you should use. If the bars of the system you choose are rated too high for your setup, they will create a rigid ride, which can result in a bouncing trailer. If, on the other hand, the bars are not rated high enough, the system will be unable to properly distribute the weight, rendering it virtually useless.

To determine the proper weight rating for a weight distribution system, you must first determine your trailer's tongue weight. Then add to that the weight of the cargo behind the rear axle of your tow vehicle. These two measurements make up the tongue weight rating for a weight distribution system.

BXW1275 BlueOx Weight Distribution Hitch, 2-Point WD, 1200-lb Tongue Weight, 6 Hole Shank