1. Weight Distribution Hitch
  2. Fastway
  3. 800 lbs
  4. 900 lbs
  5. WD With Sway Control
  6. Fits 2 Inch Hitch
Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 10,000 lbs GTW, 1,000 lbs TW

Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 10,000 lbs GTW, 1,000 lbs TW

lowest price pledge
Retail:$412.99
Our Price: $371.00
You Save: $41.99
Weight Distribution Hitch
This item qualifies for Free Shipping
Shipping Weight: 86 lbs
Quantity: 
Fastway 2-Point Weight Distribution Hitch - FA94-00-1000
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Is this right for you? Product Expert Lindsey S says:

Yes, if you:

  • Have a trailer with 600 lbs – 1,000 lbs of tongue weight that experiences sway from time to time
  • Want an affordable system that still provides excellent sway control
  • Don't want to have to go through the hassle of disconnecting anything to back your rig up or to tow in the rain

No, if you:

  • Have a significant amount of sway on a regular basis and need something that can really hold your trailer in line
  • Hate noise - the steel on steel brackets can create a racket, especially during turns
  • Have a van or low-riding car that requires more ground clearance than you can get with round bars
Two points of steel-on-steel friction work to prevent and correct trailer sway in this weight distribution system. Sway control brackets help to ensure that your trailer stays in line with your tow vehicle. Adjustable shank included. Lowest Prices for the best weight distribution hitch from Fastway. Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 10,000 lbs GTW, 1,000 lbs TW part number FA94-00-1000 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (331)
  • Q & A (89)
  • Photos
  • Why etrailer?

Fastway Weight Distribution Hitch

  • 800 lbs
  • 900 lbs
  • WD With Sway Control
  • Fastway
  • Fits 2 Inch Hitch
  • Reduces Sway
  • Allows Backing Up
  • Includes Shank
  • Electric Brake Compatible
  • Surge Brake Compatible
  • 2-Point

Two points of steel-on-steel friction work to prevent and correct trailer sway in this weight distribution system. Sway control brackets help to ensure that your trailer stays in line with your tow vehicle. Adjustable shank included.


Features:

  • Evenly distributes weight over axles of tow vehicle and trailer for stability and control
    • Creates a level ride for both tow vehicle and trailer
  • Integrated 2-Point Sway Control limits side-to-side movement
    • Brackets keep spring bars in place for a rigid system that holds trailer in line
    • Steel-on-steel friction helps to minimize sway caused by winds or sudden maneuvers
    • No lift chains - eliminate unwanted movement
  • Unique design makes system compatible with surge-type brake actuators
  • Round spring bars flex for a controlled, even ride
  • No-drill, clamp-on brackets can be adjusted along the trailer frame
    • Accommodates frame-mounted items such as gas tanks, battery boxes, toolboxes, or generators
  • Desired tilt is achieved with traditional washer design
    • Add or remove washers from spacer rivet to tilt head up or down
  • Powder coated steel construction is durable and corrosion resistant
  • Snap-up lever eases installation by reducing lifting required by trailer jack
  • System includes head assembly, adjustable shank, spring bars, sway control brackets, lift handle, pin and clip, and all necessary hardware
    • Hitch ball sold separately - requires 1-1/4" diameter shank
    • 1-7/8" Thin walled socket (EQ70-00-4800 - sold separately) recommended for hitch ball installation


Specs:

  • Tongue weight: 600 lbs - 1,000 lbs
  • Gross towing weight: 10,000 lbs
  • Fits: 2" x 2" trailer hitch receivers rated for use with weight distribution systems
  • Sway control bracket positioning: 24" - 27" back from center of coupler
  • Maximum trailer frame height: 6"
  • Shank length:
    • 8" From center of hitch pin hole to center of adjustment holes
    • 9" From center of hitch pin hole to front of shank
    • 7" From center of hitch pin hole to back of shank
    • 12" Overall
  • Total height adjustment along shank: 7-1/2"
    • Maximum rise: 5-3/4""
    • Maximum drop: 2-1/4"
    • Overall height: 8-1/2"
    • Holes are spaced 1-1/4" apart on center
  • 10-Year warranty


Dimensions

Included w/ SystemRequired - Sold SeparatelyOptional Add-Ons
  • Weight Distribution Head
  • 2 Sway Control Brackets
  • 2 Spring Bars
  • Snap-Up Lever
  • Spacer Rivet and Washers
  • Necessary Installation Hardware
  • Hitch Ball w/ 1-1/4" Diameter Shank
n/a

Weight Distribution Diagram

Create a more stable ride for your tow vehicle and trailer with a weight distribution hitch. Adding spring bars to your towing system applies leverage, which transfers the load that is pushing down on the rear of your vehicle to all the axles on both your tow vehicle and your trailer, resulting in an even distribution of weight throughout. The result is a smooth, level ride, as well as the ability to tow the maximum capacity of your hitch.



Selecting a Weight Distribution System

The tongue weight rating is the most important factor in determining which size weight distribution system you should use. If the bars of the system you choose are rated too high for your setup, they will create a rigid ride, which can result in a bouncing trailer. If, on the other hand, the bars are not rated high enough, the system will be unable to properly distribute the weight, rendering it virtually useless.


To determine the proper weight rating for a weight distribution system, you must first determine your trailer's tongue weight. Then add to that the weight of the cargo behind the rear axle of your tow vehicle. These two measurements make up the tongue weight rating for a weight distribution system.


Fastway e2 Sway Control

The two points of sway control within the e2 are created by the steel-on-steel friction that occurs when the spring bars slide within the L-brackets that are mounted on the trailer tongue. Most traditional weight distribution systems have spring bars that are suspended by chains. Although this ensures that the system is not so rigid as to create bounce in the trailer, it also allows a good deal of side-to-side play in the system.


The direct friction that is applied to the spring bars in the e2 system helps to stop sway once it has begun. The concept is similar to the way in which an add-on friction sway control device functions. When each spring bar moves forward or backward, or side to side, it rubs along the bracket, creating friction. The resistance created by this action limits the movement of the spring bar, thus preventing further side-to-side movement of the trailer.


Most add-on units feature some sort of friction material similar to that used in automotive brakes. But the e2 uses direct steel-on-steel contact to create resistance. This is the same sort of friction that is used with locomotives that pull loaded railcars weighing tons. No additional materials are needed. The steel will outlast any of those other materials, providing an extremely durable, functional sway-control system.



94-00-1000 Fast Way e2 Weight-Distribution Hitch - Round Bar - 10K

Item # FA94-00-1000

Installation Details FA94-00-1000 Installation instructions




Customer Reviews

Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 10,000 lbs GTW, 1,000 lbs TW - FA94-00-1000

Average Customer Rating:  4.8 out of 5 stars   (331 Customer Reviews)

Two points of steel-on-steel friction work to prevent and correct trailer sway in this weight distribution system. Sway control brackets help to ensure that your trailer stays in line with your tow vehicle. Adjustable shank included.

- FA94-00-1000
by:

Product was exactly has ordered. Instructions were very clear. I pull a 5000 lbs dry weight toy hauler which I expect to put about 2000 extra pounds of ATV, fuel, water, tools, etc.... on the trailer. My 2018 Chevy 1/2 ton Z71 was rated at 9700 lbs from the factory. My first pull of the trailer was 200 miles with only air bags on the truck. We bounced all the way home with the trailer. After installing the Fastway e2 Wt Dist w Sway Control we no longer have bouncing like before. I did however pull with air in the bags and with NO air in the bags. I feel the truck rode much better with air in the bags, but the best part is I had no bound with or without air in the bags. If I had bough the hitch first I would not have bought the air bags. 775004



- FA94-00-1000
by:

Product is good - heavy. Instruction book leaves something to desire. Makes reference to Spacer Washers but has no picture of where they go. Not enough pics to understand all parts. Have not used product yet but seems very high quality. BTW delivery was awful! Came 5 days after it was stated to be delivered. Big brown co did awful job. Too bad etrailer can't use FX. They are soooo much better. I won't order anything else because of delivery mess. 512391


Comments
The washers act as a fine adjustment for the tilt of the weight distribution head. The more washers added to the stud, the further rearward the head tilts. If you use the provided link, you can see an install/set-up video that will walk you through the process.
-- Mike L - 05/24/2018

38888

- FA94-00-1000
by:

I purchased this weight distribution hitch because the chain weight distribution hitch caused too much sway. Once I ordered the hitch from etrailer which came super fast I have had no issues with sway. In my opinion it is the only way to go and if I had known about this set up before purchasing the chain distribution kit I would have ordered it instead. Very happy and you will be to if you have issues with sway. 793625



- FA94-00-1000
by:

The e-2was easy to install if you follow the instructions. I like not having to deal with the extra sway control. I like the way my trailer pulls with the e-2. I would recommend this product. 776172



- FA94-00-1000
by:

What a game changer! Evens the load out and takes the bouncing and swaying out of towing my camper! Easy to add and remove sway bars! Just remember to remove them before backing in on a hard twist if you intend to drop your trailer. It will make that process a lot simpler! 772407



- FA94-00-1000
by:

Easy to install and great price. With free shipping saved me $200 vs purchase from dealership 766695



- FA94-00-1000
by:

Had a great experience with ordering and fast delivery. My package did have a part missing. After calling back they shipped it out that day. Once again I had quick delivery. Very nice and understanding customer service. And great prices. Thank you. 760632



- FA94-00-1000
by:

This product made towing my trailer much more safe and easy to tow. We tow close to our weight limit once our vehicle and trailer are loaded, so having this product really increases my confidence driving such a heavy load. The install took a while but I was able to do it myself, and now hooking it up takes only a few minutes. 728056



- FA94-00-1000
by:

fast delivery and so glad we found what we needed 717065



- FA94-00-1000
by:

What's not to like. Hitching up is a breeze. It pulls easy with great sway control. I get good gas mileage. I feel very confident when using this hitch. 704687



- FA94-00-1000
by:

Easy to install works great 635031


Comments
Great no problem
William L - 04/26/2020

74227

- FA94-00-1000
by:

I am very pleased this product. Very durable and easy to use. 627798



- FA94-00-1000
by:

works great 608142



- FA94-00-1000
by:

So far the hitch works as advertised. It is well worth the money and makes towing a larger camper MUCH easier. The sway bars are not hard to place or remove. For the price I would buy it again. 602880


Comments
We have had the weight distribution hitch for one camping season and it worked great. Weve pulled a 6k camper across the state multiple times without issue. Once in place the system is very easy to use and only takes a minimal amount of time to get everything hooked up and on the road. I appreciate the fact that you can back up and turn without having to disengage the sway bars. The system seems like it will continue to do its job for years to come. This is the best priced system out there that gets the job done.
Brian P - 02/11/2020

66600

- FA94-00-1000
by:

Great value, easy installation. I towed a 10,500# trailer 2100 miles across the country and the hitch performed well! 587682



- FA94-00-1000
by:

Can’t really say much the hitch was recommended by the dealer I got my RV from and y’all had a great price. 584251



- FA94-00-1000
by:

Easy to use. Very stabilizing. 575992



- FA94-00-1000
by:

This system works great for me. I have a Nissan Frontier and 21 foot TT. If you install this yourself make sure you watch every video and then follow the written instructions provided. You cant go wrong. This leveled my truck out and planted the front wheels firmly back on the ground. One word of warning. If you are parking your trailer on an incline and the truck and trailer aren't level move to a level spot, remove the bars and then back it in. Just makes getting the bars off easier. 570572



- FA94-00-1000
by:

Package arrived badly torn. Upon inspection a major component was found to be missing. Damage appears to be the fault of UPS. Etrailer customer service promised to ship the missing part the next day. I will still have faith in etrailer as I’ve had no problems in the past. All the items I’ve purchased from them have trouble free. 556158



- FA94-00-1000
by:

Finally got a chance to put my equipment on the truck trailer. Then I had a chance to use it and man it was a great experience. I was really impressed With installation and control. 547485



- FA94-00-1000
by:

Best hitch I've had so far. Definitely buy another if I ever needed one 544548



- FA94-00-1000
by:

I needed a weight distributing hitch to tow a 16' box trailer behind my truck/slide in camper rig, attached with a 48" hitch extension. Initial set up was a breeze. Hitching and unhitching the trailer is straight forward and easy. Weight distribution helps take some of the stress off the trucks suspension and is noticed by reduced suspension air bag pressure. Truth be told, I barely notice the trailer is back there even when loaded with two quad atv's, an Indian Roadmaster and support equipment. 522837



- FA94-00-1000
by:

Still works great! No sway at all. Great purchase. 521232



- FA94-00-1000
by:

Works great on my 25 tt 520134



- FA94-00-1000
by:

Works very well and easy to put together. Huge difference it the way the unit pulls. 517534


26
347
Show More Reviews

Ask the Experts about this Fastway Weight Distribution Hitch

  • Weight Distribution for Winnebago Micro Minnie 1706FB
    The Fastway e2 Weight Distribution w/ 2-Point Sway Control # FA94-00-1000 should work for your Winnebago Micro Minnie 1706FB and for installation we strongly recommend using 1-7/8" thin walled socket # EQ70-00-4800 to make installing the unit's hitch ball a much easier process. The other thing you will need is the hitch ball itself, either 2" Hitch Ball # A-90 or 2-5/16" Hitch Ball # 19286. The way to choose the correctly rated weight distribution system is by knowing your total tongue...
    view full answer...
  • Weight Distribution System Recommendation For Trailer With 750 Lb Tongue Weight
    Ideally when choosing a weight distribution system you want your loaded tongue weight to fall in the middle of the range that the spring bars of the weight distribution system are rated for so the 800 Lb Fastway E2 part # FA92-00-0800 is not the ideal choice. If your loaded tongue weight will be 750 or more I recommend the Fastway e2 Weight Distribution w/ 2-Point Sway Control part # FA94-00-1000 because the spring bars are rated for tongue weights between 600 lbs - 1,000 lbs. A range...
    view full answer...
  • Is a Weight Distribution System Needed for a KZ Sportsmen S240FB
    The use of a weight distribution system and or sway control device is rarely required but the reason you see them used so much is because they just make the towing experience that much better. The use of a weight distribution system will give you more stopping power, help improve the life of your tow vehicle's suspension, improve stability while towing, and reduce/prevent trailer sway among many other things. That said, the rule we use for whether or not a weight distribution system...
    view full answer...
  • Will I Need to Lower My Weight Distribution Bars Tongue Weight Capacity to Tow a Smaller Camper
    You will not have to change the your bars of your Fastway E2 System, # FA94-00-1000, to tow your new camper. This Fastway system has a tongue weight range of 400 - 1000 lbs. As long as your tongue weight falls in between this range, you will be able to two your camper safely. However if you wish, you can replace the 1000 lbs bars with 800 lbs bar, # FA94-02-0899. This bar will lower the tongue weight range to 400-800 lbs. These round bars are sold by the piece and you will have to order...
    view full answer...
  • Weight Distribution Recommendation for 2017 Winnebago Micro Minnie 1700BH
    The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use. The best weight distribution for...
    view full answer...
  • Weight Distribution System Recommendation for a 2016 R-Pod Model 179 Travel Trailer
    The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use. If the dry tongue weight on your...
    view full answer...
  • Weight Distribution for a 7,000 Pound Travel Trailer and 2015 Toyota Tacoma
    To choose a weight distribution system you will need to go by the total tongue weight of the set up. This is calculated by taking the tongue weight of the trailer, when loaded and ready to tow, and adding to that the weight of anything loaded behind the rear axle of the tow vehicle. The 7,000 pounds is the gross trailer weight rating which is the most that the trailer can weigh. You may not have it loaded that heavy all the time if at all so we will use 7,000 pounds as the high end. Tongue...
    view full answer...
  • Trunnion Bars vs Round Bars & Ground Clearance
    The round bar extends about 2-1/2 inches below the weight distribution head, while the trunnion bar does not extend below the weight distribution head at all, as you can see in the side-by-side photo I edited for you. This is why we recommend folks that have vehicles with low ground clearance like minivans and compact trucks go with a trunnion bar system.
    view full answer...
  • Trailer Still Sways when Using Fastway e2 Weight Distribution with 2014 Ram 1500
    It is possible that your total tongue weight is exceeding the capacity of your Fastway weight distribution system. For weight distribution tongue weight consists of the tongue weight of the trailer when ready to tow plus the weight of anything loaded behind the rear axle of the tow vehicle. So if your propane tanks, food, clothes, and 50 additional pounds can all be counted towards the tongue weight that 720 pounds turns into 930 pounds. That 930 pounds is within the capacity of the...
    view full answer...
  • Recommended Weight Distribution System for 23 Foot Travel Trailer w/ 5400lb GVWR
    In addition to all the items on the trailer that will increase its dry tongue weight, you'll also need to add the weight of anything you carry in the bed of the truck behind the rear axle. The right way to do this is to load up the trailer as you would typically have it, and take it to a truck scale or use the # 5780 Sherline Tongue Weight Scale. Ideally, the TTW of your trailer should fall as close as possible to the middle of the effective range of the weight distribution system...
    view full answer...
  • Unhooking a Trailer From Tow Vehicle When Using a Fastway e2 Weight Distribution Hitch
    When unhooking your trailer while using the Fastway e2, like part # FA94-00-1000, the spring bars should be removed and put somewhere or storage however the brackets can stay on the trailer's frame. This way when you go to hook back up all you need to do is install the spring bars.
    view full answer...
  • Fastway E2 Weight Distribution Recommendation for Trailer That Weighs 4,000 lb Loaded
    So your trailer when fully loaded is going to weigh right at 4,000 lbs. That means your tongue weight is most likely between 400 and 600 lbs. If you were at the 600 lb weight you'd be at the bottom of the # FA94-00-1000 weight range as it has a range of 600 to 1,000 lbs. The better option would be the part # FA94-00-0600 which has a tongue weight range of 400-600 lbs just like what your trailer would have. For a drop shank you'd then want the part # RP3344 which will work well with this kit.
    view full answer...
  • Weight Distribution Recommendation for 2016 Lance 1685
    The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use. I looked up the weight of the 2016...
    view full answer...
  • Tips for Preventing and Stopping Trailer Sway Caused by Passing Semi Truck
    The best defense against trailer sway is proper trailer loading. You need to have the tongue weight of your trailer between 10 and 15 percent of the total trailer weight otherwise sway is very possible. Other possibility is that the trailer isn't sitting level. Another thing that can help stop sway that starts from a semi truck like yours is to use the manual override lever of your brake control to smoothly apply the brakes of the trailer. That will quickly stop the sway.
    view full answer...
  • Do Spring Bars Need Be Removed While Turning in Reverse with Fastway e2 Weight Distribution System
    Yes, you will need to disengage the spring bars on your Fastway e2 Weight Distribution System like part # FA94-00-1000 if you will be making any tight turns while in reverse. This will ensure you do not put too much tension on the bars which could cause them to break. You can disengage them by simply removing the L-pins that hold the spring bars to the frame brackets.
    view full answer...
  • Driving in Reverse with Fastway e2 Weight Distribution with Sway Control
    You made a great choice! The e2 Weight Distribution Hitch, # FA94-00-1000, is a sturdy system that has 2-Point Sway Control and comes with a 10-year warranty. The unique design of this system does allow you to back up without having to disconnect the sway bars. Don't give your friends a hard time, though. Many weight distribution systems have independent friction sway control devices that do require you to get out of your vehicle and remove the device prior to backing up. Your e2 system,...
    view full answer...
  • Recommended Weight Distribution System For 2017 Keystone Hideout 27DBS WE Travel Trailer
    We have just what you need. To prevent the sag when towing a weight distribution system is what you are in need of. The part # RP66084 would be your best option. It has a tongue weight range that fits your 800 lbs of tongue weight well as it's range is 600-1,200 lbs and features only sway control on market to fight sway before it starts. For a 2 inch ball you would want part # A-90 and for a 2-5/16 inch ball # 19286. For sag from towing a weight distributions system works better than...
    view full answer...
  • Choosing the Correct Weight Distribution System
    It sounds like you've got a good start to choosing a weight distribution system. One thing to keep in mind is the 420 pound tongue weight spec of your trailer is its dry tongue weight. Since you're likely to add more than just the 100 or so pounds in the front storage area in the trailer you're better off loading it and then finding its tongue weight. From there add the 100 pounds of gear stored in the rear of the Explorer. I'm guessing with the trailer fully loaded your total figure...
    view full answer...
  • Weight Distribution for a 7,500 Pound Trailer
    Before getting into my answer I first have to ask if you intend to tow with your 2017 Toyota RAV4? If not you can skip to the second paragraph. The reason I ask is because RAV4 will be an issue. The available trailer hitches are not rated high enough, even with weight distribution, to tow a trailer weighing 7,500 pounds. And when I went to check the vehicle towing capacity in the owner's manual it said if you have an SE model then the vehicle can't be used for towing. For other models it...
    view full answer...
  • Troubleshooting Lack of Control with GMC Canyon When Towing Trailer with WD System
    I took a look at the online owner's manual for your 2017 GMC Canyon and did see that it has a 7,000 pound maximum trailer weight as long as you have the 3.6L V6 engine. For the Canyon models that feature a 2.5L L4 engine, the maximum trailer weight is just 3,500 pounds. I first recommend making sure that you aren't exceeding this 7,000 pound limit when the trailer is fully loaded. Since the dry weight of the trailer is 5,200 pounds, you will want to verify its weight when you have it...
    view full answer...
  • How to Use a Weight Distribution System with a Lifted Truck
    It sounds like you need a longer weight distribution shank for the Fastway e2 Weight Distribution System part # FA94-00-1000 on your Ford F-250 to accommodate for the 6" lift. If this is the case then I do have an option for you but a high-low adapter will not work as it is designed for flat-towing only. Instead, I recommend using something like the Fastway e2 Weight Distribution Shank part # FA92-02-4315 which offers up to 8-1/2" of drop while using round spring bars. In order to determine...
    view full answer...
  • Comparing Weight Distribution Systems With Sway Control When Towing 32-Ft Travel Trailer
    Based on your trailer weight the tongue weight when the trailer is loaded and ready to tow may be at the high range of the three systems you referenced. You really want to have your tongue weight fall right in the middle of the system range, so if your tongue weight is 1,000 lbs you may want to check out systems that can handle up to 1,200 lbs like the Strait-Line Weight Distribution w Sway Control, part # RP66074. This system can handle tongue weight between 600 and 1,200 lbs. The...
    view full answer...
  • Can you Tow Without the Spring Bars Installed on the Fastway e2 Weight Distribution Systems?
    Absolutely. You will have no problem towing a trailer with the Fastway e2 weight distribution system without the spring bars. In fact, this is the case with almost all weight distribution systems on the market. If you don't use the spring bars, it is basically just a very large ball mount.
    view full answer...
  • Fastway Weight Distribution System Recommendation for 2015 Ram 1500
    Based on your truck's towing capacities and the weight range of the trailer you plan to tow the Fastway Weight Distribution System part # FA94-00-1000 that you referenced would be a great option. It has a tongue weight range of 600 to 1,000 lbs which would be right what you'd need. The advantages of trunnion bars is mainly ground clearance. They just don't hang down quite as far. Trunnion bars can have higher capacities too. Typically you only see round bars on lighter weight ranges....
    view full answer...
  • How to Reduce the Amount of Force it Takes to Engage my Spring Bars on my Fastway E2
    The only way to reduce the force needed to get the bars engaged on weight distribution systems like the Fastway e2 Weight Distribution w/ 2-Point Sway Control part # FA94-00-1000 is to reduce the amount of pitch you have set into the weight distribution system or to use the jack to lift the trailer and truck combination higher. Of the two options the second is the way to go. Of course you need to chock the wheels on the truck and trailer as you would anyway to be safe but overall this...
    view full answer...
  • Recommended Weight Distribution System for 5,300 Pound Trailer
    When choosing a weight distribution system, the most important factor to consider is the total tongue weight of your setup. This will include both the loaded tongue weight of your Gulf Stream Track and Trail, along with any added cargo weight coming from behind the rear axle of your Dodge Ram. Ideally, you will want this number to fall somewhere around the middle of the weight distribution system's tongue weight capacity range. Using the 5,300 weight you mentioned in your question, we...
    view full answer...
  • Complete Weight of Fastway e2 Round Bar Weight Distribution System
    The Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round # FA94-00-1000 weighs 86 lbs. Once you add the hitch ball like # 19286 will add 4 lbs so you'll be at 90 lbs total.
    view full answer...
  • Reasons a Trailer would have Persistent Sway if Tongue Weight is Adequate
    I'd check the suspension of your trailer as it sounds like something might be worn out which is allowing too much movement that is turning into sway. Normally insufficient tongue weight is the cause of persistent sway like you described but your trailer sounds like it has enough tongue weight and is sitting level enough so that checks out. Under-inflated tires or worn out/broken suspension components is another issue that can cause sway too. I'd go over all of the components to see if...
    view full answer...
  • Bar Drop of Fastway e2 Weight Distribution Hitch
    The bars of the Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW # FA92-00-1000 will sit just a couple inches below the top of the trunnion bars as they sit pretty level under tension. If instead you are asking about the round bars of # FA94-00-1000 it will be about an 8 or 9 inch drop from the top depending on the adjustment of the head on the shank and the drop or rise on the shank. If you are worried at all about ground clearance I recommend...
    view full answer...
  • New, Not Used, Fastway e2 Weight Distribution System # FA94-00-1000
    Fastway e2 Weight Distribution system # FA94-00-1000 is brand new. If we have a used item available it will appear at the very bottom of the product page. So in other words we would make it clear if something was used. The Fastway systems do not come with a ball so that is the only other item that is needed to complete the system. For a 2-5/16 inch ball use # 19286. For a 2 inch ball use # A-90. I have linked a video review of this system for you.
    view full answer...

Do you have a question about this Weight Distribution Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality weight distribution hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate weight distribution hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Updated by:
Dan D
Updated by:
Adele M
Updated by:
Laura H
Updated by:
Shelly K
Updated by:
Sarah W
Updated by:
Amanda M
Updated by:
Mike S
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Lori W
Expert Research:
Jeffrey L
Written by:
Lindsey S
Video Edited:
Jacob T
Video Edited:
Chris R
Installed by:
Cole B
Test Fit:
Robert C
Test Fit:
David F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.