Spacer Washer for Fastway e2 Weight Distribution Head - Qty 1
(50 reviews)
Price: $3.79
In Stock
Spacer Washer for Fastway e2 Weight Distribution Head - Qty 1
Item # FA92-04-9655
Our Price: $3.79
Orders above $99 qualify for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (50)
- Q & A (0)
- Videos (1)
- Photos
Fastway Accessories and Parts - FA92-04-9655
- Weight Distribution Hitch
- Hardware
- Washers
- Fastway
- e2
Slide this washer onto the spacer rivet of your e2 weight-distribution system to increase the tilt of your system's head.
Features:
- Washer fits all Fastway e2 weight-distribution systems
- Slides onto spacer rivet (sold separately) to increase head tilt for desired positioning
- 1/2" Diameter
92-04-9655 Fast Way e2 Flat Spacer Washer
Video of Spacer Washer for Fastway e2 Weight Distribution Head - Qty 1
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Fastway Spacer Washer for e2 Weight Distribution - FA92-04-9655
Hi there, I'm Michael with etrailer.com. Today we're gonna take a quick look at this Fastway replacement washer. This is going to be a replacement spacer washer for your Fastway e2 weight distribution system. And this will mount onto your spacer rivet like so. And to give you the proper spacing that you need to create that tilt in your e2's head unit. Now this rivet is sold separately.
You can find it here at etrailer.com, using the part number that you see on the screen there. So if you needed to replace that, you have that available to you. But otherwise, this is going to be compatible with all Fastway e2 weight distribution systems. So you're not gonna have to worry about it fitting onto that original rivet. It will do a great job for you.
It's got that half inch diameter opening, so it will slide on there very easily so that you can get that spacing that you need to achieve that proper head tilt. So that completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Customer Reviews
Spacer Washer for Fastway e2 Weight Distribution Head - Qty 1 - FA92-04-9655
Average Customer Rating: 4.4 out of 5 stars (50 Customer Reviews)
Slide this washer onto the spacer rivet of your e2 weight-distribution system to increase the tilt of your system's head.by: Steven 04/19/2024
Spacers were just as advertised. Shipping was a nightmare, taking over three weeks to receive but that was the post office’s problem not etrailer’s. Etrailer responded to each of my inquiries in a timely manner as we tried to track the shipment through the mail system.
by: Jeff08/02/2023
Sorry about that. I meant to attach photos. Comparing the washers I have on the hitch now versus what you sent me I was disappointed that basically the new washers are something that I can find in a hardware store. I was expecting bigger diameter much thicker washers like I have on the trailer already. In videos I have watched it sure seems like the thicker heavy duty washers are what belongs there.
by: Christopher05/04/2024
These are not the same washers that come with unit. I made sure to order the fastway e2 washers to match unit i have. Not The same size.
by: Clint11/01/2019
I do not like that these are not OEM. I.D. works fine, O.D. is considerably smaller. Thickness is considerably smaller. 4 of these are the same width of 2 1/2 OEM washers. I think these will work I will keep an eye on them for any negative issues.
Clint
11/2/2020
1 year out, still working as intended.
by: RJ03/23/2016
I got these to readjust my Fastway e2 WD hitch along with some other items. These washer will work fine, however they are not a direct factory replacement. The OD diameter is smaller and the over all thickness is less than my factory supplied washers. It is also possible that the factory has changed the specs on these. Overall its not a big deal, its only a washer.
by: Albert03/17/2022
The washers they sent are much smaller than the OEM washers. They are only 1/16” thick where the OEM are 1/8”. It takes twice as many of these washers to achieve the same adjustment.
Do not buy these if you are looking for the same washers as the ones that come with the original hitch.
Very misleading catalog information.
Jenny N.
3/29/2022
I wanted to ask you if your system is a Fastway e2 system or an Equalizer system? Equalizer makes two different spacer washers for their systems. One for the Equalizers and one for the Fastway E2 hitches.
by: Thomas03/04/2018
When it comes to anything related to trailers, towing, hitches, or anything even remotely related, this is the place to go.... best prices, best products, best technical support.... I will never buy anywhere else. Thanks etrailer!
by: Russ 06/09/2021
Ordered this spacer to fine tune my Fastway E2 WD hitch. As always, etrailer was easy to work with to find what I needed and the part shipped quickly. I have used etrailer often over the years I have owned RVs
by: Steven 06/06/2023
Exactly what I ordered, prompt service.
by: Gerald 08/04/2022
Exactly what I needed to get the hitch ball set correctly. Trailer and TV are now totally level.
by: Leon W10/23/2019
Terrible! Does not control sway. L brackets slip. Replaced hitch with Reese straight line hitch.
by: Richard 04/24/2023
Very fast shipping and product was as d escribed.
by: Larry06/04/2021
The product was as promised, the Company is Great, I have purchased numerous items from etrailer, they are always competitively priced, shipping is normally early and always accurate. Highly recommend them.
by: Don07/19/2016
Quick shipping as always. Etrailer always has what I need.The washers are smaller than the OEM washers but work correctly.
by: Raymond09/28/2020
Thinner and smaller diameter than the original washers installed 10 years ago.
by: Gonzalo 09/27/2022
Quick shipping
by: Bill 07/14/2022
Just what I needed!
by: Ryan 06/09/2021
The spacer is not the same size as the original e2. They will work though.
by: John 03/19/2021
Great product at a good price. Always quick shipping. Always great customer service.
by: Ben 07/17/2020
washer, enough said
by: Charles 01/18/2022
It's a washer...
by: JJTX11/03/2020
These are expensive washers, but it keeps it consistent when you order these.
by: Ft Myers Rv Resort02/05/2024
by: Allen 07/13/2020
Just what I needed. Fast delivery!
by: Kevin02/08/2024
25
50
Show More Reviews
See what our Experts say about this Fastway Accessories and Parts
- Compatibility of Fastway Weight Distribution Parts for Round Bar SystemYes, you can use the Fastway e2 Weight Distribution Shank # FA92-02-4315, which provides 8-inches of drop, along with a Fastway WD head # FA94-02-1055 for a round bar system. Spring bars that are compatible include the 600-lb rated # FA94-02-0699 (you'll need two) and the 1000-lb rated # FA94-02-1099 (again, you'll need two). We also offer the spacer washer # FA92-04-9655, replacement bolts # FA92-02-9600 and spacer rivet # FA92-04-9650 that work with this e2 head unit.
view full answer... - What Thickness is the Spacer Washer for Fastway e2 Weight Distribution HeadThe thickness of the Spacer Washer for Fastway e2 Weight Distribution Head # FA92-04-9655 is 1/16" thick.
view full answer... - Replacement Head and Hardware for a Fastway e2 Weight Distribution SystemFrom the issues you described having with your Fastway e2 Weight Distribution # FA92-00-1000 system, replacing the head and hardware is the correct route to take to fix your problems. The outside of your head may be in good shape, but it sounds likely that the inside where the retaining pin and washers sit is damaged. - Replacement Head for Fastway e2 Weight Distribution Systems # FA92-02-1255 - Replacement Hardware Kit for Fastway e2 Weight Distribution Head # FA92-02-9600 - Spacer...
view full answer... - Replacement Spacer Washers for Fastway e2 Weight Distribution SystemThe part you referenced, # FA92-04-9655, are the replacement spacer washers for all Fastway e2 weight distribution systems such as # FA92-00-0600. These washers slide onto the Fastway's spacer rivet, which we also have replacements for with part # FA92-04-9650.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Updated by:
Dan D
Updated by:
Laura H
Updated by:
Wilson B
Written by:
Lindsey S
Installed by:
Michael B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
5/7/2024
I have come across this before. These tend to be smaller then with what came with the system originally however they will still work with the system. If for any reason they are not working for you please let me know.