Can You Back Up With The Curt Trunnion Bar Weight Distribution Hitch C24UR?

Updated 08/11/2021 | Published 08/09/2021

Products Featured in This Question

Curt Trunnion Style Weight Distribution System w/ Shank - 10,000 lbs GTW, 1,000 lbs TW

(73)

$442.76

Curt Friction Sway Control for Weight Distribution Systems

(327)

$68.64

2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs

(2634)

$19.01

2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000

(3928)

$21.94

Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW

(170)

$516.97

Question:

Does the C24UR allow backing up and sharp turns?

asked by: Harold N

Expert Reply:

If the Curt Trunion Style Weight Distribution Hitch # C24UR is used without friction sway bars it does allow backing up and sharp turns, however it is recommended to use at least one friction sway bar # 17200 which makes it where you can NOT back up with the hitch hooked up.

Instead of this hitch I recommend the Fastway e2 # FA92-00-1000 which has built in two point sway control that does allow backing up and sharp turns. This hitch is a favortie of our staff and installers, and works with total tongue weights between 600-1000lbs so it is very similar to the # C24UR.

Now this hitch does not include a hitch ball so you will need either 2" hitch ball # A-90 or 2-5/16" hitch ball # 19286.

I included videos of the products mentioned for you to take a look at.