1. Camper Jacks
  2. Stromberg Carlson
  3. Leveling Jack
  4. Stabilizer Jack
  5. Scissor Jack
  6. 9001 - 10000 lbs
Leveling Scissor Jack Set - 30" Lift - 10,000 lbs - QTY 2

Leveling Scissor Jack Set - 30" Lift - 10,000 lbs - QTY 2

Item # JSC-30
lowest price pledge
Our Price: $248.99
Camper Jacks
This item qualifies for Free Shipping
Shipping Weight: 34 lbs
Quantity: 
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
These 2 leveling scissor jacks with a combined 10,000-lb capacity each will keep your RV level and stable. Each adjusts from 5" to 30" inches as your situation requires, and the bow-tie base steadies the jack on soft surfaces. Call 800-298-1624 to order Stromberg Carlson camper jacks part number JSC-30 or order online at etrailer.com. Free expert support on all Stromberg Carlson products. Guaranteed Lowest Price and Fastest Shipping for Leveling Scissor Jack Set - 30" Lift - 10,000 lbs - QTY 2. Camper Jacks reviews from real customers.
  • All Info
  • Reviews (297)
  • Q & A (26)
  • Videos (1)
  • Photos
  • Why etrailer?

Stromberg Carlson Camper Jacks - JSC-30

  • Leveling Jack
  • Stabilizer Jack
  • Scissor Jack
  • 9001 - 10000 lbs
  • 30 Inch Lift
  • Bolt-On
  • Weld-On
  • Stromberg Carlson
  • 2 Jacks

These 2 leveling scissor jacks with a combined 10,000-lb capacity each will keep your RV level and stable. Each adjusts from 5" to 30" inches as your situation requires, and the bow-tie base steadies the jack on soft surfaces.


Features:

  • Scissor jack helps to level and stabilize 5th-wheel, travel, horse and cargo trailers
  • Remains steady on soft surfaces because of wide bow-tie base
  • Bolts or welds on
  • Includes 2 steel jacks and 1 crank handle


Specs:

  • Capacity: 5,000 lbs per jack
  • Extended height: 30"
  • Retracted (collapsed) height: 4"
  • Collapsed length: 32-1/2"
  • 1-Year limited warranty


Note: These jacks are designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks.



JSC-30 Stromberg Carlson Scissor Jacks - 30" - Set of Two




California residents: click here


Video of Leveling Scissor Jack Set - 30" Lift - 10,000 lbs - QTY 2

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of Stromberg Carlson Camper Jacks - Leveling Stabilizer Jacks 10K - JSC-30

Ellen: Hey everyone. I'm Ellen here at etrailer.com and we're going to be taking a quick look at the pair of leveling stabilizer jacks. These are going to help to keep your campers steady and stable whenever you're in there moving around, or just getting situated, walking around inside there. A lot of times, whenever you get inside a camper, if you don't have any stabilizer jacks, you can feel really wobbly and unsteady. It can actually be a little dangerous as well. So these are going to help to keep everything nice and level and mostly stable.

So we don't have to worry about it rocking back-and-forth or feeling like we're going to topple over or cause any damage to the camper. It does come as a pair of jacks, so get this one extended up pretty far. This isn't quite all the way up and the other one in the compact position. It does also come with the crank arms so you can operate those and make sure that you can lift and level them out pretty quickly and effectively.One thing I do want to note though, these are not intended to lift the whole weight of your camper. They'll just stabilize your jack.

So they're not intended to lift it up off the ground, they're just there to provide support so you want to make sure that you're not putting the entire weight of the camper just on these. You want to also be using the wheels and all that other good stuff. So just keep that in mind, they're not intended as lifting jacks, stabilizer jacks only. So let's take a closer look at how these guys work. Make sure that they're the right fit for you.

Between the two, they do have a weight capacity of 10,000 pounds, so each one on its own can handle 5,000 pounds. Again, you do want to be careful with that and not just put the whole weight of your camper there, but they will provide that amount of support.The way it's going to work is the drive nut here on the back, we'll take the crank arm with the socket, place it on there, and then just crank away to open it out. You can see it moves pretty easily. Of course, there's no weight on it right now so it's going to move pretty freely, but it should move freely as you are using it on your camper. And whenever you're closing it down, you just want to make sure that you get it all the way until that nut stops.

And of course it's acting wobbly because it's not attached to anything. As far as measurements with these, whenever it's completely closed, each jack measures about 32 inches long and then about four inches tall. We go to the top of the mounting flange there, the distance for the width of that mounting flange is about 10 inches and got several holes to choose from for that mounting plate so I'll give you a few measurements to use as reference.Between these outer most holes, center to center. I'm going to use ruler for this one. Between the two outermost holes it's about six-and-a-quarter inches, between the two closer ones it's about four inches. If we go between these two center to center again, it's right about five inches, maybe five-and-a-quarter. There might be a little bit of variance. It looks like the plates bow down a little. So as you attach this to your camper, it might draw in a little bit, so their measurements might change slightly. These are just rough estimates but there's also two small holes on either side. The distance reading on those long ways is about eight and five-eights inches. Going this way, it's about an inch-and-a-half. Here it's about an inch-and-a-half as well. So I hope that gives you an idea of that mounting plate. Whenever it's fully extended, the jacks measure about 30 inches tall. So whenever it's fully up, it should measure about that long and that bolt will stick out as it goes through or that's what drives everything, but it shouldn't ever be longer than about 30 inches.And I'm just going to give you one more measurement here to the end of that bolt, yeah, about 32 inches for that bolt. The foot is about nine inches long and about four-and-a-half inches wide. So that helps to spread out the weight of your camper, helps it to not just sink right into especially softer ground like mud or sand or softer grass and things like that. I hope that's been helpful in deciding if these are going to be the right stabilizer jacks for you. We do have a lot of options available here at etrailer.com and a lot of camping accessories in general. So check them out. Thanks for watching..


Customer Reviews

Leveling Scissor Jack Set - 30" Lift - 10,000 lbs - QTY 2 - JSC-30

Average Customer Rating:  4.8 out of 5 stars   (296 Customer Reviews)

These 2 leveling scissor jacks with a combined 10,000-lb capacity each will keep your RV level and stable. Each adjusts from 5" to 30" inches as your situation requires, and the bow-tie base steadies the jack on soft surfaces.

- JSC-30
by:

Just what a 40’ Keystone Retreat park model trailer needs!!! Very happy with my purchase and the support this product provides.



- JSC-30
by:

Very pleased with etrailor product the stabilizer jacks fit perfectly and their prompt service made it possible for us to take off to Henry's Lake Idaho Yellowstone and Grand Teton



- JSC-30
by:

The leveling jacks I ordered have gone up considerably in price, but the service was great and they shipped very quickly. Received them in only about 5 days. Very satisfied with etrailer.



- JSC-30
by:

Very well made and very strong! Now I can pick my little camper off the ground! lol!!



- JSC-30
by:

Exactly what I ordered, arived in 3 days easy installation completely satisfied .



- JSC-30
by:

Can not believe how fast this transaction to place Thanks AAA Plus



- JSC-30
by:

2 of the jacks on my trailer were bent and difficult to operate. Purchased this set as replacements, removed the mounting plate and they bolted right in. Perfect match and they work like when the others were new. Ordered them on Wednesday they arrived the following Monday. Nice easy process.



- JSC-30
by:

I have ordered several items for etrailer and all have preformed as stated, price was better and service was quicker. They proved a load of information about product or help with installation. *****



- JSC-30
by:

They worked well with our application. Didn't use them for trailer specifically but they still worked as what we have envisioned them to be.



- JSC-30
by:

These jacks are so much better than the original equipment, no the rv has no movement when it has been leveled. Big plus !



- JSC-30
by:

great product bought them to stabilizer our rv but they are also helping us level it so far they have been great



- JSC-30
by:

I ordered this jack set and I'm very pleased with not only how fast I got them but how they look and work. I ordered the socket also and it works great with my handydandy drill. I am using them on my camper to level it up. Thanks so much for having so much and such a great price.



- JSC-30
by:

Better than original ones no more blocks with the 30 inch length



- JSC-30
by:

High quality. I bolted them in place. they give you plenty of mounting holes for any position. Etrailer was very pleasnt to deal with. Highly recomended.



- JSC-30
by:

Excellent service fast delivery the product was a perfect fit for my rv



- JSC-30
by:

Works great. Put this on a [email protected], replaced bent rear lift. Took some modification and some drilled holes. No big deal. Want to replace the front ones, but they are still in good condition. Way better than original lifts.



- JSC-30
by:

Box had several holes in it. Luckily all parts were still inside (I hope)



- JSC-30
by:

The jacks were everything you said they were. We are very happy with them



- JSC-30
by:

Great product. Fast service and delivery. Customer service on the phone was great. Highly recommend.



- JSC-30
by:

fast shipping easy to install very heavyduty great product



- JSC-30
by:

Awesome product! Very stout and reliab le



- JSC-30
by:

Ordered the product from the campsite, arrived 2 days later.. perfect fit.



- JSC-30
by:



- JSC-30
by:



- JSC-30
by:

Good solid product delivered as promise d.


27
302
Show More Reviews

Ask the Experts about this Stromberg Carlson Camper Jacks

  • Recommend Replacement Leveling Scissor Jack Set For 2000 Skyline Nomad 2950
    For replacement scissor jacks on your 2000 Skyline Nomad 2950 I recommend the Stromberg Carlson Leveling Scissor Jack Set # JSC-30 which will bolt or weld to the bottom of the frame of your RV and will support 10000lbs offering up to 30" of lift. I included a video of the Stromberg Carlson Leveling Scissor Jack Set # JSC-30 for you to take a look at.
    view full answer...
  • How to Lift Class B Motorhome Off Ground to Protect Tires and Suspension for Full-Time Occupancy
    Lifting your parked RV will help protect your tires from flat spots but stabilizer jacks like # UF48-979002 or # TJ01RT-HD are not suitable since they are not designed to handle the entire weight of the RV, only to support/stabilize a portion of it. A better solution is the TrailerLegs Tire Saver Stands # 326-TRLLG-4 which support the RV by the axles. The stands take all load off the tires which will prevent bends to the steel belts; bending of the belts is non-reversible. The stands...
    view full answer...
  • Recommended Replacement RV Scissor Jacks
    The upgraded scissor stabilizer jacks that I recommend are the Leveling Scissor Jacks with Handle part # JSC-30 which have a 10,000 lb capacity and offer up to a 30" lift. They also come with an easy to use crank handle. They can be bolted or welded to the frame.
    view full answer...
  • Stabilizer Jack Recommendation for a 2014 Coachmen Leprechaun 319DSF
    The Leveling Scissor Jack part # JSC-30 should work well on your motorhome named, "Dottie." The extended height is 30 inches so as long as the trailer is less than 30 inches from the ground these should work well.
    view full answer...
  • Recommended Leveling Jack System that Bolts onto Chassis of Mercedes Sprinter Motorhome
    I recommend using the Leveling Scissor Jack Set, # JSC-30. This set is designed to be bolted or welded to a flat surface on the bottom of a motorhome frame rails or chassis. These 2 leveling scissor jacks with 5,000-lb capacity each will keep your motorhome level and stable. Each adjusts from 5" to 30" inches as your situation requires, and the bow-tie base steadies the jack on soft surfaces. These stabilizers will help prevent your motorhome from rocking back and forth or side to side...
    view full answer...
  • Best Way to Attach Leveling Scissor Jacks # JSC-30 to 2 inch Wide Frame
    For attaching to a 2 inch frame you'd be best served welding the Leveling Scissor Jack Set # JSC-30 since there wouldn't be enough width to get several bolts to it.
    view full answer...
  • Can Stabilizer Jacks be Used to Lift RV a Little
    To answer the last question first, a stabilizer jack such as # JSC-30 would be used until there was just enough tension to keep the trailer or RV from rocking. For actual lifting you would need a different device. So assuming that the RV was level these stabilizers would help prevent it from rocking back and forth or side to side (depending on where they were mounted) while you move around inside. If you were to try to lift weight with them you would have a very hard time because it...
    view full answer...
    Image 1 for
  • Can More than One Set of Scissor Jacks be Used on Trailer
    Each jack of the Scissor Jacks part # JSC-30 are rated for 5,000 lbs of stabilization. That means that they can stabilize up to 10k if you do a set of two. That doesn't mean lift the trailer off the ground though. Most people have luck with just a single set but if you wanted to run them on all corners of the trailer you would get a rock solid setup.
    view full answer...
  • What are the Dimensions of the Top Plate on the Stromberg Carlson Trailer Jack JSC-30
    The diameter of the top plate on the # JSC-30 is 9 inches. This top plate is also the mounting plate as the bottom is what touches the ground. The holes on this plate are 7-7/8 inches apart measured across.
    view full answer...
    Image 1 for
  • Dimensions Of Stromberg Carlson Leveling Scissor Jack Set
    I was able to find the dimensions of the Leveling Scissor Jack Set - 30 Lift - 10,000 lbs # JSC-30 you were looking at as shown in the included diagram, but unfortunately Stromberg Carlson does not have any CAD or technical drawings of the jacks. The # JSC-30 measures 32-1/2" long, 4" tall retracted, 30" tall extended, and the mounting bracket is 10" long. The foot is 9" long x 4-1/2" wide.
    view full answer...
    Image 1 for
  • What Size is the Screw Portion of the Leveling Scissor Jack Set, # JSC-30
    I spoke with my contact at Stromberg Carlson and she stated that the Leveling Scissor Jack Set, # JSC-30, uses a 3/4 inch screw to raise and lower the jack. So the included handle would accept that 3/4 inch screw.
    view full answer...
  • Trailer Stabilizers For Echo UTV Trailer With Frame Height Of 22 Off The Ground
    I recommend the Leveling Scissor Jack Set # JSC-30 for your Echo UTV Trailer. These have a maximum height of 30" and a maximum stabilization weight rating of 10,000lbs per jack. They can also be mounted to your trailer by using bolts or welding them into place. This will make it easier when you are ready to lower the jacks when needed. You can use the manual crank handle, but I recommend using the Ultra-Fab Speed Socket Power Drill Adapter # UF48-979005 to make raising and lowering...
    view full answer...
  • Winch Recommendation for a 1998 Rockwood Pop Up Camper
    For an economical brake winch that should work well on your pop up camper trailer as long as it would fit in the boxed area of your trailer frame I would recommend the MaxxTow Positive Lock Hand Winch # MT70176. This winch should work well as a replacement for your trailer, I attached a review video for you to check out. You may find that you would have to mount the winch on top of the frame instead of inside it. Otherwise, your best option would be to find the exact model you have on...
    view full answer...
  • Leveling Jack Recommendation to Stabilize a Coachman Motor Home
    Yes, the Leveling Scissor Jack Set # JSC-30 would do an excellent job stabilizing your coachman motorhome as that is exactly what this product is designed to do.
    view full answer...
  • 2018 Jayco Melbourne Power Leveling Jack Recommendations
    For your 2018 Jayco Melbourne, I recommend the Ultra-Fab Power Twin II Electric Stabilizer part # UF39-941705. This leveling system works with frame rails spaced between 48" to 80" apart.
    view full answer...
  • Why Shouldn't Scissor Jacks be Used to Support Trailer Getting Loaded with Car Unhitched
    I wish I could say yes, but scissor jacks like part # JSC-30 really aren't designed for that type of application. What you are trying to do becomes a little bit sketchy because the nose of the trailer is going to want to climb as well as the trailer roll forward so basically it's a recipe for disaster. You really would want to load and unload the trailer with it connected to a truck.
    view full answer...
  • Would the Leveling Jacks # JSC-30 Work as Replacement Jacks on my Coleman Utah Pop-Up
    These Leveling Scissor Jack Set # JSC-30 have a capacity of 5,000 lbs per jack. As long as you would not be asking the winch to handle more than 5,000 lbs each these jacks would work well as replacement leveling jacks on your Coleman Utah pop-up camper.
    view full answer...
  • Manual Stabilizing Jacks For Class C Motorhome
    These manual scissors jacks are for stabilization and not for leveling, so if you want to level out your Class C Winnebago Vita motorhome then you will need leveling blocks, the Ultra-Fab Leveling Blocks for Trailers and RVs # UF48-979051. Then for stabilizing jacks, ground clearance should not be an issue, no, and what you will need depends on the distance from your frame to the ground. The Stromberg Carlson Scissor Jacks have a 5,000 lb capacity per jack and each has a retracted height...
    view full answer...
  • Adding Front Stabilizer Jacks to a 2010 Forest River Rpod 174
    For your 2010 Forest River Rpod 174 I recommend the Leveling Scissor Jack Set # JSC-30. These have a universal mounting flange with a low profile at 4" when fully retracted. They will offer up to 30" of extension for your camper to be stabilized. These will work best mounted at an angle to the trailer rather than paralleled with either the front or side. To make it easier to move your stabilizers up and down a Ultra-Fab Speed Socket Power Drill Adapter # UF48-979005 can be used with...
    view full answer...
  • Can Leveling Scissor Jack Set # JSC-30 be Mounted to Trailer Hitch on 2009 Icon Motorhome
    The Leveling Scissor Jack Set, # JSC-30, is designed to be bolted or welded to a flat surface on the bottoms of the RV frame rails. As for whether a hitch can support the weight or force if the scissor jack was used in that location, the hitch manufacturers do not test their hitches for this so the answer is unknown. Even if we could be assured that the hitch could support the weight, I do not think that you would be happy with the end result. Mounting the jacks to the hitch would...
    view full answer...
  • Stabilizer Jack Recommendation for Stored Boat Trailer To Support While in Storage
    Scissor style stabilizer jacks like the Leveling Scissor Jack Set # JSC-24 would be your best option. These were designed to stabilize camper trailers but would work great for what you are wanting. I attached a picture of what they look like in use plus a review video for more info as well.
    view full answer...
    Image 1 for
  • Can the Leveling Scissor Jack Set Be Used On a Class C Motorhome
    The Leveling Scissor Jack Set part # JSC-24 can be mounted on a motorhome yes. In regards to installation, the jack will need to be attached to a part of the frame but there aren't many other mounting restrictions. However, I do recommend you check your ground clearance once mounted so you don't have any issues with them scraping. That said, please note the above jacks only offer up to 24" of lift so if you need more than this then you will have to go with the Leveling Scissor Jack Set...
    view full answer...
  • Recommended Jack Stands to Elevate Boat and Trailer for Storage with Weight Off Tires
    For your boat trailer, to keep the weight off the tires for storage, I recommend the 2-Ton Jack Stands - Qty 2 # PTW41021. Each jack can hold 4,000 lbs, but I recommend using 4 of these spaced as evenly as possible to keep the weight off the wheels and then just use the trailer jack for a 5th point of support and balance.
    view full answer...
  • Stabilizer Jacks Needed for a Military M101 A2 3/4 Ton Cargo Trailer
    When fully extended the Domar Trailer Jack, # TJ01RT, measures 18 inches from top of bracket to bottom of foot. We do not have a jack of similar construction that is longer but there are options. We carry 30 inch tall scissor style stabilizer jacks, # JSC-30 (single) and # JSC-30-IND (pair), that would most likely be a better fit with the 25 inch frame height on your Military M101 A2 trailer. This would most likely be the best option for you. We also have the stabilizer leg, # FSJ20324,...
    view full answer...
  • Replacement Rear Scissor Jacks for 2012 KZ Spree 261 Travel Trailer
    Trailer items like jacks and stabilizers are usually not trailer-specific and most trailer makers don't even keep track of the specific jack installed on their trailers since they may change such parts based on availability or pricing. The things you want to match up as you choose your new scissor jack are the weight capacity (check the sticker on your damaged jack and use at least that same rating if not higher); and the jack height. You want to make sure you do not lose ground clearance...
    view full answer...
  • How To Confirm Fit of Lippert High-Speed Power Stabilizer Jack
    The mounting holes on the Lippert High-Speed Power Stabilizer Jack part # LC298707 are 68-11/16" apart side to side on center. This fits a standard-ish trailer frame spacing. That said, there are other frames outside of this spacing and in which case the jacks would not be a good option. This would require manual stabilizing jacks like the Scissor Jacks part # JSC-30.
    view full answer...

Do you have a question about this Camper Jack?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality camper jacks for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate camper jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Kathleen M
Installed by:
Kathleen M
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S
Employee Noah M
Updated by:
Noah M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 800-298-1624