Replacement Scissor Jacks for 2019 North Trail 22CRB

Question

Question:

I have a North Trail 22CRB travel trailer...2019. I would like to replace the scissor jacks and need assistance on a direct replacement, bolts holes line up and meet the height requiremnts etc?

asked by: Rob C

0

Expert Reply:

To replace the standard 24" scissor jacks on your 2019 North Trail 22CRB you can use the Leveling Scissor Jack Set # JSC-24. If you typically need blocks to make up the additional height to the ground you can switch to 30" jacks with the # JSC-30. I have attached the dimensions of the installation brackets below. If this doesn't match what you currently have, you can unbolt the jacks from the bracket and install them with your current brackets for a direct fit.

expert reply by: Robin H

0

Stromberg Carlson Scissor Jack Bracket Dimensions
(click to enlarge)

Answer 1

Hey John! Since you have the same number of teeth the Replacement 24 Tooth Pinion Spur Gear for Power Gear RV Slide Outs #LC86EX will likely work as a replacement. I would measure the outer diameter as well. If it matches the 1.417" measurement…

view full answer...

Answer 2

Hi Greg; I wish there was a way for me to know the correct parts for that 2023 Coachmen Catalina but we don't have a way to look it up. The only company that lists their parts like that is Grand Design. If they can get out to their trailer and…

view full answer...

Answer 3

Hey Thomas, welcome back! And thanks for all of the info you listed on your 2021 Forest River Rockwood Minilite. Based on that I would recommend going with the higher rated scissor jacks part #e96VV which are rated for 15k for the pair. Are you…

view full answer...

Answer 4

Yes, the Scissor Stabilizer Jack #TJSC-24 will work on your 2016 Coachmen Clipper 17RD. It is a universal bolt on stabilizer jack that will lift to a height of 23-3/4". I always recommend using only dry lubricants on these parts as wet lubes and…

view full answer...

Answer 5

Hey Robert. Our highest capacity scissor jacks are going to be the etrailer Scissor Stabilizer Jacks. They come in a 4-pack item #e74RV or a 2-pack item #e96VV and have a 7,500 lbs capacity per jack. We do have ones rated for 10,000 lbs apiece. What…

view full answer...

Answer 6

Thanks for the pictures and measurements Tim! The Terran Industries 5-Leaf Double Eye Spring item #TX93RJ are going to be the best option to replace your 26.5" long springs. This spring has a 3,500 lbs capacity so it's going to be a solid…

view full answer...

Answer 7

Wheel torque specs vary based on stud diameter, wheel diameter and wheel material. The linked chart shows you commonly recommended torque specs for a range of studs and wheels. For 1/2-inch wheel studs and a 14-inch steel trailer wheel you will use a…

view full answer...

Replacement Scissor Jacks for 2019 North Trail 22CRB

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching