bing tracking image
  1. Trailer Jack
  2. etrailer
  3. Car Hauler
  4. Enclosed Trailer
  5. Utility Trailer
  6. Sidewind Jack
Round A-Frame Trailer Jack - Sidewind - 15-5/8" Travel - 5,000 lbs

Round A-Frame Trailer Jack - Sidewind - 15-5/8" Travel - 5,000 lbs

Item # TJA-5000S-B
Our Price: $74.53
Trailer Jack
Orders above $99 qualify for Free Shipping
Shipping Weight: 13 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
The best technical support and full trailer jack installation instructions. Great price Cherokee Wolf Pup TT Toy Hauler trailer jack and expert service. Forest River Cherokee Wolf Pup TT Toy Hauler, 2018 trailer jack by etrailer are available from etrailer.com. For expert service call 1-800-940-8924 to order your Round A-Frame Trailer Jack - Sidewind - 15-5/8" Travel - 5,000 lbs part number TJA-5000S-B, or order online at etrailer.com.
  • All Info
  • Reviews (348)
  • Q & A (0)
  • Photos

etrailer Trailer Jack - TJA-5000S-B

  • Car Hauler
  • Enclosed Trailer
  • Utility Trailer
  • Sidewind Jack
  • Bolt-On
  • Weld-On
  • A-Frame Jack
  • Leveling Jacks
  • Tongue Jacks
  • 16 Inch Lift
  • No Wheel or Foot
  • etrailer

Black powder coated A-frame jack has a retracted height of 8-3/8" and an extended height of 24". The external gearbox is easily accessible, and the zinc-finished sidewind handle arm provides a sleek look.


Features:

  • Utility jack lets you raise and lower your A-frame trailer
  • Sidewind handle has zinc finish for attractive look and rust resistance
  • Black powder coat finish resists corrosion
  • External gearbox is easily accessible
  • Effortless greasing with built-in grease zerk
  • Footplate or caster sold separately


Specs:

  • Bracket height (from bottom of inner tube to bottom of bracket):
    • 8-3/8" Retracted
    • 24" Extended
  • Travel: 15-5/8"
  • Clearance: 15" from bottom of bracket to top of jack
  • Outer tube diameter: 2-1/4"
  • Inner tube diameter: 2"
  • Handle radius: 8"
  • Lift capacity: 3,000 lbs
  • Support capacity: 5,000 lbs
  • 1-Year warranty


Dims

TJA-5000S-B Ram Round A-Frame Trailer Jack - Side Wind - 15-5/8" Travel - 5,000 lbs

Compare to Bulldog BD1700100317



Customer Satisfaction Score:


Customer Reviews

Round A-Frame Trailer Jack - Sidewind - 15-5/8" Travel - 5,000 lbs - TJA-5000S-B

Average Customer Rating:  4.8 out of 5 stars   (348 Customer Reviews)

Black powder coated A-frame jack has a retracted height of 8-3/8" and an extended height of 24". The external gearbox is easily accessible, and the zinc-finished sidewind handle arm provides a sleek look.

by:

It bolted right on trailer and works/cranks easily. Nice it's greaseable as my trailer lives outside.



by:

Great Jack. Works flawlessly. They shipped my order very rapidly the Jack was spot on in the decryption.



by:

I modified spare tire location (needed more tongue weight), so replaced top mount crank jack with side wind version. Shipping speed was upgraded sans asking and received item just before my next trip. Installed in 5 minutes and jack is much more ergonomic than original. Whenever I need anything trailer or pick up truck related, I don't even bother shopping around, for etrailer pretty much has everything! Customer service is outstanding even with returns or replacements. Completely satisfied with product and service.
Thanks for everything Etrailer

Roger S.

8/12/2018

Still working fine. Smooth and easy operation. I seriously doubt that I’ll have any issues with the side wind trailer jack.



by:

Simple, strong, and reliable



by:

Work perfectly for the application we intended, as risers for a 30’ belt!



by:

Item arrived one day after expected date, but that was due to UPS. etrailer has it processed and out to UPS same day I ordered it, which was a Sunday too. Item arrived great. Was exactly what was described. I could not find this same jack at other stores. etrailer had exactly what I needed and it was cheaper, with a higher rating too. Will order from etrailer again.



by:

Existing job site trailer jack broke Thursday. Menards, Home Depot, Northern tool, Mill didn't have the needed style in stock. Ordered it up and got here on Saturday. Perfect fit and higher weight rating than previous jack. Cranks smooth.



by:

Jack was good product



by:

This is a sturdy and easy to use manual jack. It is replacing a failed electric jack, and I am glad to have a manual jack of this high quality. It is the perfect size for my 3500 lb Rockwood Travel Trailer.



by:

Installed easy and has been working flawlessly. Had next day delivery.



by:

The TJA-5000S-B jack I ordered was exactly what I needed. It was easy to install. The photos show the old jack and the new jack that I needed so that I could mount 2 bikes on front of my Forrest River A-frame camping trailer.



by:

I've had this installed on my utility trailer for about a year now. It works great. I've had some pretty big loads in it and have had no issues raising and lowering it with this jack.



by:

Package came very quick. Went right on to my trailer. The foot that "matched" the jack I bought did not work. Had to run to a local store and get one that would.



by:

Great product



by:

Product came on time, as advertised. Had a hard time believing the low price!! My old jack was so damaged I had to persuade it off with hammer and chisel, but then this jack went on in minutes. Functions smoothly. Couldn't be happier. etrailer has all my future trailer business. Five Stars.



by:

The replacement tongue jack fit perfectly (hole alignment) and the movement is back to the way the original jack worked when brand new. Haven't used it in its full range yet, but so far looks promising. Just a little concerned about the top cover of the jack which appears that it would let rain water into the gear box. I applied a quart size zip lock bag which should keep the rain out.



by:

Works as advertised. Definitely a great price on this jack.. I use it daily on a 20ft trailer.. lets see how long it last me..



by:

Works as intended. I have it on a small 20ft camper that weighs about 4k Lbs. I recommend adding grease and an adjustable bottom with a quick release pin.

Jess

3/10/2023

1 year later still working. No problems.



by:

A long search for an American made jack led me to etrailer.com. Turns out the jack was made in China. Disappointed!!

Etrailer Expert

Jenny N.

3/23/2023

We love to offer parts that are made in the USA. We do not offer a similar jack that is USA made however on any part that is, it will be listed on the product page as Made in USA.



by:

Excellent service nothing but good thin gs



by:

Jack works fine, but arrived with several dings and chips in paint. I realize it will probably get that way eventually anyway, but would expect it to arrive looking new.

Etrailer Expert

Jenny N.

9/12/2023

These jacks arrive to us in large pallets which unfortunately does mean they are not in the best shape. I am happy to have Customer Service contact you.



by:

Worked perfectly. Easy to weld up and strong as ever!



by:

Easy installation! Just three bolts and back in action...



by:

VERY PROMPT SERVICE



by:

I bought this for a basketball goal replacement and it worked out GREAT!! It raises the backboard with ease, and my 8 year old daughter loves it. It shipped out faster than I was expecting, and it arrived in just a few days. Awesome job towards Etrailer!!!!!!
I will definitely recommend Etrailer to anyone !!


25
348
Show More Reviews

See what our Experts say about this etrailer Trailer Jack

  • Powered A-Frame Jack to Replace Side Wind 5k Trailer Jack
    Bulldog has a powered a-frame jack with the part # BD500199 that would work great as a replacement for the etrailer.com A-frame jack # TJA-5000S-B. It has a similar weight capacity and also has a drop leg feature that will allow for quicker raising and lowering.
    view full answer...
  • Swiveling Trailer Jack for Use on Gravel Surface
    We offer replacement wheels for trailer jacks that include just the wheel itself, wheels with hardware and wheels with the caster assembly. None of these are pneumatic tires and none has a 2000-lb capacity. We do offer the Trailer Valet 5X Swivel Jack and Trailer Mover # STC-V211 which can handle a 500-lb tongue weight (TW) and that includes a pair of pneumatic tires that make rolling on gravel much easier than with jacks that have a solid wheel. This swiveling jack fits on trailer frames...
    view full answer...
  • Recommended Trailer Jack for Aliner Scout to Use with Jack It 2 Bike Carrier
    It looks like the Aliner Scout has a dry weight of around 1350-lbs and a tongue weight of around 135-lbs when unloaded. Since you need a side-wind jack, I recommend using the etrailer.com Round, A-Frame Trailer Jack # TJA-5000S-B which will easily handle the weight of your Aliner Scout trailer; since this jack does not come with a foot plate you'll want to also get the Footplate for 2,000-lb and 5,000-lb Round, A-Frame Jacks # JF-99. If you wanted to go with a premium option, I recommend...
    view full answer...
  • What Might Cause 12 Volt 7-Way Circuit to Blow When Using Powered Trailer Jack
    Is the jack overloaded which is causing the excessive amperage draw? What jack do you have? Can you see an amperage rating on it anywhere which would give you an idea what it should be drawing? It's possible the jack screw/gear is damaged too which would cause the motor to have to work too hard for standard use which might overdraw it's power circuit.
    view full answer...
  • Replacement Trailer Jack on Horse Trailer to Replace Bulldog A-Frame Jack
    For an A-frame jack to replace the one you have now the I recommend the etrailer jack part # TJA-5000S-B that you referenced would work great. This has a 5,000 lb lifting capacity so it would easily handle the tongue weight of your trailer that is most likely around 850. For a foot pad you'd then want the part # JF-99. This jack is a sidewind jack with I think are easier to crank than the topwind.
    view full answer...
  • Will the etrailer.com Round A-Frame Trailer Jack Fit on a 2012 Keystone Outback 250RS
    As long as the mounting points on the A-frame of your 2012 Keystone Outback 250RS are right at about 3 inches apart from each other, and the center hole does not have a diameter bigger than 2-1/4 inches, the etrailer.com Round A-Frame Trailer Jack, part # TJA-5000S-B, will fit perfectly, as it uses an industry standard mount. This jack has a lift capacity of 3,000 lbs and a support, or static, capacity of 5,000 lbs so you will want to keep that in mind when loading up your Outback. You...
    view full answer...
  • Recommendation for a A-frame Jack with a 2 inch Post Opening
    We're glad your hitch worked out well! I took a look through our selection of trailer jacks, a 2-1/4 inch outside diameter of the jack's outer tube is pretty common. I did find a 1000 lb capacity sidewind jack that might be a good choice for you if the fully loaded tongue weight of your trailer is less than 1000 lbs. If this is the case, go with the Dutton-Lainson # DL22530.
    view full answer...
  • Replacement A-Frame Trailer Jack
    Your best option is to replace the jack and drill 3 new holes into the trailer. A-frame jacks have a standard bolt pattern that's roughly 3 inches on center from hole to hole. Generally the holes on the jack are slotted to allow for slight variances in the measurement and different hole sizes. Our most popular electric A-frame jack is the Stromberg Carlson # SC63VR. It has stops to prevent overextending or retracting - which is the cause of failure on most jacks. If you prefer a manual...
    view full answer...
    Image 1 for
  • Recommended Trailer Jack for 2017 Sure Trac Dump Trailer
    For your 2017 Sure Trac Dump Trailers, I recommend the Round A-Frame Trailer Jack - Sidewind - 15-5/8" Travel - 5,000 lbs # TJA-5000S-B. Then you can add the footplate # JF-99 or a Drop Leg # JF-1005H-Z. These jacks are very well made and have a high tongue weight load capacity of 5,000 lbs.
    view full answer...
  • Recommended Replacement A-frame Sidewind Jack for Airstream Trailer
    We offer several A-frame sidewind jacks that would work for your Airstream trailer. The jack I recommend is the Round A-Frame Trailer Jack - Sidewind # TJA-5000S-B. This jack features 15-5/8 inches of travel and has a 5,000-lb capacity. The distance from the mounting plate to the top of the jack is 15 inches. The mounting plate for the jack is typically universal as you mentioned. Check the mounting holes on your trailer and if the holes measure 3 inches center-to-center, this would...
    view full answer...
  • A-Frame Coupler and Trailer Jack Replacement for Shelby 5101 Trailer
    I looked up your Shelby 5101 trailer and it is an a-frame trailer that has a weld on a-frame coupler that has a jack mounting hole built into it. So since the coupler uses a non-standard bolt pattern for the jack I'd recommend replacing the coupler and jack together like with the # CA5100B for a coupler and then for a jack the # TJA-5000S-B would be a great option.
    view full answer...
  • Does the etrailer JF-1005H-Z Drop Leg Fit the Side A-Frame Jack TJA-5000S-B?
    I just went out to the warehouse and checked. The Drop Leg for etrailer and Ram Jacks Footplate item # JF-1005H-Z fits perfectly with the etrailer A-Frame Round Jack item # TJA-5000S-B.
    view full answer...
  • How to Gain Clearance Between Tailgate and A-Frame Sidewind Trailer Jack
    An A-frame trailer jack like # TJA-5000S-B can be position in any orientation. So the handle can be installed facing the rear if you'd like. Another solution that may work for you is a longer ball mount. We have the Brophy # EA40 which is 14-5/8 inches from the hitch pin hole to the ball hole. This will move the entire trailer back from the tailgate.
    view full answer...
  • Jack Recommendation for a Trailer with a 1-7/8 inch Diameter Bottom Support Plate
    None of the jacks we offer have tube dimensions that would be small enough to fit the bottom support plate on your trailer that is 1-7/8 inches in diameter. The best recommendation I could make would be to install a new bottom support plate like part # BD003135 so that you could use a jack like the etrailer Jack part # TJA-5000S-B that you referenced. For a foot plate you would want part # JF-99.
    view full answer...
  • Will a 5,000 lb Trailer Jack be Easier to Crank than a 2,000 lb Jack
    A higher capacity a-frame jack is going to be easier to crank than a lower capacity jack at the same weight. So, what that means is that the etrailer jack part # TJA-5000S-B that you referenced is going to be an easier to crank jack than what you currently have. I attached a review video for this jack for you to check out as well.
    view full answer...
  • Mounting Bolt Pattern of the Bulldog A-Frame Jack and is Hardware Included
    The bolt holes on the etrailer Round, A-Frame Jack, item # TJA-5000S-B, triangle mounting flange are 3 inches from center of one hole to the center of the next hole. They are equally spaced apart and they are elongated for easier installation. A-Frame jacks are all the same size and have the same bolt-pattern. The manufacturers did this so they could simplify the manufacturing process for both bolt-on and weld-on A-frame jacks. The jack can be bolted on, hardware not included, or it can...
    view full answer...
  • Where Is The VIN Number on a Sure Trac Utility Trailer Found?
    That is a good question. Usually a utility trailer's VIN number will be found on the frame near the trailer tongue but it actually can be printed anywhere on the frame. It may also be on a sticker that carries the manufacturer name and trailer model information. That sticker may be positioned in an out of the way location to protect it from wear from regular use and road hazards. It should be a 17 character VIN. In cases of trailers that have no VIN, your local state police or highway...
    view full answer...
  • Black 5,000 lb A-Frame Jack with Sidewind
    We have a black jack with same specs and style as the Bulldog you referenced with the etrailer # TJA-5000S-B but the # BD155032 is not available in black and side wind. The # TJA-5000S-B is a 5,000 lb capacity sidewind jack that fits A-frames just like the Bulldog.
    view full answer...
  • Recommendation for Tongue Jack on Travel Trailer with 780 LB Tongue Weight
    I recommend going with the Ultra-Fab Electric A-Frame Jack, # UF38-944017. This jack has a 12-volt motor for quick and simple lifting. The lift capacity is 3,500 pounds. By using a jack with a much higher lifting capacity than the tongue weight of your trailer, there is less wear and tear put on the jack's motor. If you are looking for a more economical option, etrailer offers the etrailer side wind A-Frame Jack, # TJA-5000S-B. This jack gives you a lift capacity of 5,000 pounds. For a...
    view full answer...
  • Recommended Boat Winch, Trailer Jack, and Bunk Boards for 27 Foot Carver Boat and Trailer
    For your 27 foot Carver boat, the weight you referenced will put us into only electric options. Typically for boats, there is a ratio of 2:1 on the capacity of the winch. Our Super Heavy Duty Hand Winches fall slightly below that ratio, so a nice electric winch will be your best option. I'd suggest we go a little bigger than that ratio to account for steeper inclines and other variables with the Bulldog Winch Trailer Winch with Wire Rope, # BDW15019. It's 1.8 hp, permanent magnet motor...
    view full answer...
  • Recommended A-Frame Trailer Tongue Jack for the Demco Trailer Coupler Part # DM15337-97
    I do have an a-frame trailer tongue jack that will work with the Demco 50-Degree A-Frame Trailer Coupler part # DM15337-97 but the Square A-Frame Jack part # TJDA-5000S will not due to its square shaped design. Instead, I recommend using the Round A-Frame Trailer Jack part # TJA-5000S-B which has specifications that are very similar to the above jack. I have attached a review video of both the trailer jack and trailer coupler for you as well.
    view full answer...
  • Dimensions of etrailer Trailer Jack # TJA-5000S-B
    I ran out to our warehouse and pulled one of the etrailer trailer jacks # TJA-5000S-B jacks off the shelf. I measured the retracted height of the jack at 23-3/8 inches and found the outer tube to be 2-1/4 inches in diameter.
    view full answer...
  • A-Frame Trailer Jack with 4 Inches Bracket to Bottom of Jack Clearance when Retracted
    The mounting bracket on etrailer jack # TJA-5000S-B is welded to the outer jack tube so it cannot be moved. It measures 8-3/8 inches when retracted. If 2,000 pounds capacity is enough, then Pro Series jack # PS1401000303 measures just 5-1/2 inches retracted.
    view full answer...
  • A-Frame, Zinc Coated, Sidewind Jack with Drop Leg Option Recommendation
    Yes, the Drop Leg for etrailer and Ram Jacks - 13-1/4" Tall - 5-1/4" Diameter Footplate - Zinc # JF-1005H-Z that you referenced will work with the Round A-Frame Trailer Jack - Sidewind - 15-5/8" Travel - 5,000 lbs # TJA-5000S-B. Check out the review video I attached.
    view full answer...


< Previous
123. . .7



Do you have a question about this Trailer Jack?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Cole B
Installed by:
Cole B
Employee Randy B
Installed by:
Randy B
Employee Aidan B
Installed by:
Aidan B
Employee Wilson B
Updated by:
Wilson B
Employee Ronnie R
Updated by:
Ronnie R
Employee Mike S
Updated by:
Mike S
Employee Amanda M
Written by:
Amanda M
Employee Zach D
Video by:
Zach D
Employee Charles A
Video by:
Charles A

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.