A-Frame Coupler and Trailer Jack Replacement for Shelby 5101 Trailer
Updated 08/16/2021 | Published 08/15/2021
Products Featured in This Question
Question:
I have a pop up on a Shelby 5101 trailer. The trailer Jack seized up and needs to be replaced. Problem is the holes they go through, the bottom one is too short. I found out there is 3 inches between the homes that is no longer standard. How Aldo I replace the Jack?
asked by: Dan
Expert Reply:
I looked up your Shelby 5101 trailer and it is an a-frame trailer that has a weld on a-frame coupler that has a jack mounting hole built into it. So since the coupler uses a non-standard bolt pattern for the jack I'd recommend replacing the coupler and jack together like with the # CA5100B for a coupler and then for a jack the # TJA-5000S-B would be a great option.
Product Page this Question was Asked From
A-Frame Coupler with Black Paint Finish - 2" Ball - 5,000 lbs
- A-Frame Trailer Coupler
- Standard Coupler
- 50-Degree Frame
- Weld-On
- 5000 lbs GTW
- 2 Inch Ball Coupler
- Trigger Latch
- 2-1/4 Inch Hole
- Standard Grade
- etrailer
more information >
Continue Researching
- Video: In-Depth Review of the A-Frame Coupler with Black Paint Finish
- Video: Checking Out the RC Manufacturing T-Series Trailer Tongue Tool Box
- Shop: A-Frame Coupler with Black Paint Finish - 2" Ball - 5,000 lbs
- Shop: RC Manufacturing T-Series Trailer Tongue Tool Box - A-Frame - Steel - 2.6 Cu Ft - Black
- Shop: A-Frame Trailer Coupler - Trigger Latch - Zinc - 2" Ball - Weld On - 5,000 lbs
- Q&A: Replacement for Shelby 5101 Coupler
- Q&A: Replacement Trailer Coupler For A Shelby 5101 Trailer
- Q&A: Correct Replacement for Shelby 5101 A-Frame Trailer Coupler
- Article: Holiday 2025 | Staff Picks for Real-Life Adventures
- Q&A: Does The Bumper And Grille Need To Be Removed To Install A Base Plate On A 2025 GMC Canyon AT4X?
- Q&A: How Wide are A-Frame Trailer Couplers CA5400 and CA5100B
- Q&A: The Function of the Auxiliary 12-Volt Connection on the 7-Way Trailer Connection
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Parts Needed To Switch Trailer From Standard Ball Coupler To Pintle Hitch System
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Lighting Requirements
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Double-Eye Trailer Suspension System Review