1. Accessories and Parts
  2. etrailer
  3. Trailer Jack
  4. Camper Jack
  5. Legs
  6. Drop Leg
Drop Leg for etrailer and Ram Jacks - 13-1/4" Tall - 5-1/4" Diameter Footplate - Zinc

Drop Leg for etrailer and Ram Jacks - 13-1/4" Tall - 5-1/4" Diameter Footplate - Zinc

Item # JF-1005H-Z
lowest price pledge
Retail:$17.97
Our Price: $16.89
You Save: 6%
Accessories and Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 3 lbs
Quantity: 
In Stock
JF-1005H-Z - Legs etrailer Accessories and Parts
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Drop leg adds 8" of additional lift for your etrailer or Ram A-frame jack with a 2" diameter inner tube. Extension can be adjusted in 2" increments. Corrosion-resistant, zinc-plated finish. Pin and clip included. Call 800-298-8924 to order etrailer accessories and parts part number JF-1005H-Z or order online at etrailer.com. Free expert support on all etrailer products. Guaranteed Lowest Price and Fastest Shipping for Drop Leg for etrailer and Ram Jacks - 13-1/4" Tall - 5-1/4" Diameter Footplate - Zinc. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (55)
  • Q & A (19)
  • Videos (2)
  • Photos
  • Why etrailer?

etrailer Accessories and Parts - JF-1005H-Z

  • Trailer Jack
  • Camper Jack
  • Legs
  • etrailer
  • Drop Leg

Drop leg adds 8" of additional lift for your etrailer or Ram A-frame jack with a 2" diameter inner tube. Extension can be adjusted in 2" increments. Corrosion-resistant, zinc-plated finish. Pin and clip included.


Features:

  • Drop leg increases overall extension by 8" for maximum adjustability
    • Works with etrailer and Ram A-frame jacks with 2" diameter inner tubes
  • Zinc-plated finish resists corrosion
  • Includes pin and clip


Specs:

  • Footplate diameter: 5-1/4"
  • Tube diameter: 1-3/4"
  • Height: 13-1/4" from bottom of foot to top of tube
    • 2" From center of hole to center of hole
  • Pin diameter: 3/8"
  • 1-Year warranty


Ram Dims

JF-1005H-Z Ram Drop Leg for A-Frame Jacks - 13-1/4" Tall





Video of Drop Leg for etrailer and Ram Jacks - 13-1/4" Tall - 5-1/4" Diameter Footplate - Zinc

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for etrailer and Ram Jacks Drop Leg Review

Speaker 2: Today we're going to be taking a look at the drop leg for the etrailer and ram jacks. This measures 13 1/4 inches tall and has a five diameter foot plate with a zinc finish. The part number is JF-1005H-Z. Now here's what our drop leg looks like installed. This gives us a total of eight additional inches that we can add to the end of our inter-tube of the jack here, just so we don't have crank so long to get the jack fully extended. This is going to give us five locations to choose from for a total of eight inches of adjustment here.

The biggest benefit you're going to see about a drop leg like this is one, the time savings, but also we don't have to worry about the narrow lift of our jack digging down into the mud or the sand or the gravel, whatever it might be. This gives us a full five inch circle that's going to come down and make contact with that material. Again, dirt, sand, gravel and it spreads that energy out over a greater area so we don't have to worry about our jack being sunk down in or actually dropping down below our ball mount when it sits there for an extended period of time. We will just use a jack stand to simulate attaching our trailer to our vehicle. This is where the big benefits are coming in. Rather than us having to fully retract our jack the whole way up, we can stop at that point once we have the weight off the plate.

We'll just pull our pin out and then lift our drop leg up into position. Once we have it lined up with that highest setting, you'll see that it's going to be nice and high. It doesn't add that much to the end of the jack leg there, so we won't have to wor4ry about hitting it or bumping it or anything like that. Next time we're ready to unhook our trailer, simply pull our pin, extend that back down, we've got a lot less work ahead of us to get that coupler off of our ball. We've also got a couple of small holes here so if any mud we're to happen to get up on the foot plate, sand, or water, it can just run out of those so it won't build up there causing corrosion down the road. To install our foot plate, we basically just need to line up the groove that is in the back side of it here with that same groove that's on the inner tube of our jack and then we'll align one of the holes here. Now these holes are on two inch centers and you'll just take the provided pin and clip, it's going to slide through our hole and we'll secure it there on the other side.

Then it's just a matter of operating our jack. That's going to complete our look at the Drop Leg for the etrailer and ram jacks, part number is JF-1005H-Z.


Customer Reviews

Drop Leg for etrailer and Ram Jacks - 13-1/4" Tall - 5-1/4" Diameter Footplate - Zinc - JF-1005H-Z

Average Customer Rating:  4.8 out of 5 stars   (55 Customer Reviews)

Drop leg adds 8" of additional lift for your etrailer or Ram A-frame jack with a 2" diameter inner tube. Extension can be adjusted in 2" increments. Corrosion-resistant, zinc-plated finish. Pin and clip included.

- JF-1005H-Z
by:

Initially this extension would not fit in my jack. After a little beating and a lot of oil, it fits mediocre at best. 619617


Comments
This leg is designed for use with etrailer or Ram brand jacks with a 2 inch inner tube. If youre using it with a different jack, it will likely not fit as well as it would with the jacks it was designed for.
-- Mike L - 04/10/2019

52751

- JF-1005H-Z
by:

Received product very quickly, quality is top notch, prices reasonable compared to others. Very pleased with this and other products from etrailer. 443641



- JF-1005H-Z
by:

This worked perfect on my manual crank tongue jack on my camper. I'm not sure then brand of the tonque jack, but it's a 2 1/4" od upper tube and a 2" of lower tube. This fit inside the lower tube. 364643



- JF-1005H-Z
by:

Very well made 558025



- JF-1005H-Z
by:

Found just I was looking for, website is great. My order shipped sooner than I expected and I had it in 3 days. Great service again from etrailer, I will be back. 637513



- JF-1005H-Z
by:

The product is well made. It fit perfectly. I was amazed at excellent welding. Meets and exceeds my expectations. I would recommend etrailer to all my friends and family. 331624



- JF-1005H-Z
by:

the jack leg had to be grinded, filed and sanded to even get it in the jack ! After all that had to spray it with white grease and knock it in and out till I got tired and said the hell with it! I will get back on it tomorrow. but I do not think it will ever slide up and down easily like the video shows 420764



- JF-1005H-Z
by:

After dealing with negative local parts dealers I tried etrailer.com , they went above and beyond. The adjustable jack drop leg works excellent. No more carrying big, heavy, ugly blocks. Also the customer service was AWESOME!!! Thank you Donna P. 675330



- JF-1005H-Z
by:

I installed it today it lifts my 26 foot camper well and the drop leg I bought with jack works well.. I am interested to see how they hold up this coming year with use. 511455



- JF-1005H-Z
by:

Exactly what I wanted. I was unsure of whether it would fit a Carry-On Trailer jack, but I ordered it anyway because the dimensions seemed right. It fit perfectly! I would recommend adding Carry-On to your compatibility list. 599668



- JF-1005H-Z
by:

Bought this for my small camper because I was tired of winding the jack up and down so far. Seems like a nice product so far. Fits in the Ram Jack I have easily. The bottom plate edge is a little rough and could use smoothing down but does not bother me. Want to add, I received the product in the mail and tried on my camper but the last few holes would not let the pin go though. Contacted etrailer rep by email the next day and in no time I was contacted back. Was asked to take a few pictures of the issue and I emailed them back to George. Before I knew it I had a new email stating my new product was on its way. Within days I got the new drop leg and all fit perfect. This is the only reason I gave it a 4 star, but thanks to etrailer they helped me fix the issue with ease. So for them I would give 5 star. 553912



- JF-1005H-Z
by:

Great product. It is just as described. Very fast shipping and delivery. 740355



- JF-1005H-Z
by:

good quality product and was as adverti sed 737212



- JF-1005H-Z
by:

Just what I needed 734600



- JF-1005H-Z
by:

The product fit great and was very reasonable priced I would recommend to anyone. 716448



- JF-1005H-Z
by:

Bought this drop foot with a new Ram A-Frame jack. First impressions are that it’s very well made and it fits the jack perfectly. This will definitely save me some time wrestling with wood blocks. 713690



- JF-1005H-Z
by:

Fits perfectly just what I wanted fast shipping 713405



- JF-1005H-Z
by:

Exactly what I needed - works great 707751



- JF-1005H-Z
by:

Never mind the product. Stacy A was brilliant!!! Thanks Stacy. Great job. 707230



- JF-1005H-Z
by:

Great product and concept I just recommend you pick the correct jack to use with it. The V-notch on this drop leg better mates up with the Bulldog jacks as opposed to the Pro-series jacks. If you use the Pro-series jack you should use the Bulldog version of this drop leg. Both combinations will work but the Pro-series drop leg/Bulldog jack combo slide together effortlessly (because the v notch profile matches better). If you get a combo that doesn't slide together so well it'll still work, you'll just compromise your finish on the jack leg slightly because of the metal to metal contact when you beat one into the other, it'll score a groove into your drop leg. 705978



- JF-1005H-Z
by:

This has given me the height that I needed. We had an incident where the jack fell of the block. Jack and extender didn't get damaged and stood up to the extra stress. 703859



- JF-1005H-Z
by:

The product I received was exactly what I ordered and appears to be of excellent quality. It was delivered in a timely manner with no issues. I have purchased other items from etrailer.com and expect to purchase more in the future! 696679



- JF-1005H-Z
by:

Saves a lot of hand cranking the trailer Jack. I had to drill out a few of the holes to get the pins to go through. 681742



- JF-1005H-Z
by:

This is a great attachment to provide about 28" of lift depending on the jack used. I combined this with the Bulldog 15" lift A-frame Top-wind jack. That combination allowed the drop leg to drop right into the jack where when I tried the same ProSeries top wind jack of the same parameters it did not slide in as smoothly as with the Bulldog jack (the V-notch more closely matches Bulldog's profile). If this attachment slightly binds beyond your liking when inserting in the jack then try the Bulldog version of the same drop leg. 674364



- JF-1005H-Z
by:

Product as described. Has channel to match Buyers jack. 670185


26
56
Show More Reviews

Ask the Experts about this etrailer Accessories and Parts

  • Will etrailer.com Drop Leg # JF-1005H-Z Work with Ram 5000 Series A-Frame Jack
    Yes, the etrailer.com Drop Leg # JF-1005H-Z will work perfectly with your existing Ram 5000 Series Jack. What you have is actually our part # TJA-5000T-Z, which does have a 2 inch diameter inner tube making it compatible with the drop leg. I have attached a short video review that you can check out as well.
    view full answer...
  • Compatibility of Jack Foot JF-1005H-Z with Bulldog Jack BD151443
    The Drop Leg with Footplate # JF-1005H-Z works with etrailer and Ram A-frame jacks with 2-inch diameter inner tubes. It will also fit the jack # BD151443. I went to our warehouse and took a check of both parts they do fit nicely.
    view full answer...
  • Will the Drop Leg Part # JF-1005H-Z Fit the Ram Round A-Frame Trailer Jack Part # TJA-2000-Z
    Yes, the Drop Leg for etrailer and Ram Jacks part # JF-1005H-Z will fit the Ram Round A-Frame Trailer Jack part # TJA-2000-Z and provide an additional 8" of lift. It also has a round footpad which will make the jack much sturdier as there is a larger footprint.
    view full answer...
  • Foot Replacement for Ram A-Frame Jack with 2,000 lb Capacity
    Thanks for the picture of your jack. From that I can tell that you have the Round A-Frame Trailer Jack # TJA-2002-B and the correct replacement foot you'll need is the # JF-1005H-Z that you mentioned. This will give you up to an additional 8 inches of additional height in 2 inch increments.
    view full answer...
  • Drop Leg for A-frame Jack BD155033
    The Drop Leg for etrailer and Ram Jacks # JF-1005H-Z will fit jack inner tubes with an outer diameter of 2-inches, like that on the Bulldog # BD155033. A preferred option is to use the Fastway Flip Automatic Fold-Up Jack Foot # FA88-00-6500. This will provide the benefit of the drop leg extension but without the hassle of removing the pin for travel.
    view full answer...
  • How to Determine if etrailer and Ram Jack Drop Leg Will Fit a Lippert Jack
    Drop Leg for etrailer and Ram Jacks # JF-1005H-Z could potentially work on your Lippert A-frame jack but the two parts have not been tested together and confirmed so I cannot guarantee it. You would need to go by the measurements of the jack which are shown in the included picture. The only thing not shown in the picture is the pin diameter which is 3/8".
    view full answer...
  • How To Find a Replacement Drop Leg for a Ram Trailer Jack
    The Drop Leg for Ram Jacks part # JF-1005H-Z works with any Ram Trailer Jack that has a 2" inner tube diameter. This is most likely what you have so yes it should work for you although I am not sure exactly which jack you have.
    view full answer...
  • Stackable Block Solution for Center Jacks of Lippert Ground Control System
    Best solution we'd have would be with the Stackers part # A10-0918 which allow you an easy way to "stack" blocks to help take up the extra height you need to allow your Lippert Ground Control kit to make contact sooner. You can also use these to make ramps for your wheels too to help change spares.
    view full answer...
  • Replacement Drop Leg Needed for a RAM 2000 Series A-Frame Jack
    It looks like you have the RAM jack that is the equivalent of our Round A-Frame Trailer Jack # TJA-2000S-B. Since this is the case then the Drop Leg # JF-1005H-Z will fit as our etrailer.com jacks are rebranded RAM jacks.
    view full answer...
  • Foot Plate Recommendation for Pro Series Jack # PSRV20000103
    For a foot plate that fits your Pro Series Jack # PSRV20000103 the part # PS1400700340 is the recommended plate. The # JF-1005H-Z fits other brand jacks and would not be the correct one to use.
    view full answer...
  • Will etrailer.com Drop Leg # JF-1005H-Z Fit Tongue Jack on Forest River Toy Hauler
    The etrailer.com Drop Leg # JF-1005H-Z referenced in your question is designed to fit etrailer and Ram A-frame jacks with 2 inch diameter inner tubes, but may work with other brand jacks as long as they have this same 2 inch diameter inner tube. This drop leg will add 8 inches of additional lift to your jack and has a pin diameter of 3/8 of an inch. If you can let me know what brand or model jack you have on your toy hauler I will be happy to confirm if this will work or recommend a...
    view full answer...
  • New Drop Leg Needed for Atwood Premier 3000 Trailer Jack
    Since the ID of your Atwood Premier 3000 jack measures 1.730" the Drop Leg # JF-1005H-Z is not compatible, but we do have a possible solution for you. The Husky Brute Super Foot Fold-Up Jack Foot # HT31610 is a fold-up jack foot that attaches to the outside of your inner tube and provides you with a 7" extension to the foot of your jack. It comes with an adapter so it is compatible with both 2" or 1-3/4" inner jacks. Check out the attached review video to see how it works!
    view full answer...
  • Could Drop Leg # JF-1005H-Z Fit Trailer Jack BAL 29025
    I looked up the BAL 29025 jack you have on your trailer and it's not very similar to the jack the Drop Leg part # JF-1005H-Z so I can't say it looks like an easy fit confirmation but if you check out the attached dimensional picture for this leg you'll be able to compare it to your jack to see if would fit. The only dimension not in the picture is the pin diameter for the leg which is 3/8 inch.
    view full answer...
  • Recommended Foot Plate for Trailer Jack with 1-3/4 Inch Diameter Inner Tube
    For your jack that features an inner tube diameter of just under 1-3/4 inches, we do have the Dutton-Lainson Steel Foot # DL22541 that should fit and work well. This removable steel foot is designed for jacks with a capacity up to 1,000 pounds and has a zinc TUFFPLATE finish that will resist corrosion. I have attached a short video demonstration on this product that you can take a look at. If you are instead looking for a drop leg like the etrailer.com Drop Leg # JF-1005H-Z, then...
    view full answer...
  • Highest Lift for A Frame Trailer Jack With 5,000 lb Weight Capacity
    We have a jack that meets all of the requirements that you are asking about. The Round A-Frame Trailer Jack # TJA-5000S-B has a lift, or travel, of 15-5/8 inches. When this jack is fully extended, the bracket height it 24 inches. This jack also features an easily accessible grease zerk for maintenance and has a support capacity of 5,000 lbs. Since this jack doesn't come with a foot, I recommend using part # JF-1005H-Z to help stabilize your trailer. If you would like a bottom support...
    view full answer...
  • Availability of Dual Wheels and Extra Long Footplade for Trailer Jack
    For dual wheels we have parts # F500265 and # F500130 that fit Fulton F2 Swing-Up jacks, as well as part # JWK-6DP for etrailer or Ram jacks, and part # DL22441 for Dutton-Lainson Model 6800 Swivel Jacks. For an extra long foot plate you can use part # JF-1005H-Z which is compatible with 2 inch diameter outer tubes, has a footplate diameter of 5-1/4", tube diameter of 1-3/4", and a height of 13-1/4" which has adjustment holes separated by 2" on center.
    view full answer...
  • What is the Lift Capacity of the etrailer.com Square A-Frame Jack # TJDA-5000S
    The lifting capacity of this jack is determined by the drop leg. In this case the Drop Leg # TJD-5000-FT that comes on the # TJDA-5000S jack is rated for a 3,000 lb lift capacity. If you are needing a trailer jack that has a 5,000 lb lift capacity then I recommend the Round A-Frame Trailer Jack # TJA-5000-B. There is a drop leg that you can purchase for this jack as well. The Drop Leg # JF-1005H-Z will give you a little more surface area for your trailer jack to use.
    view full answer...
  • Recommended Boat Winch, Trailer Jack, and Bunk Boards for 27 Foot Carver Boat and Trailer
    For your 27 foot Carver boat, the weight you referenced will put us into only electric options. Typically for boats, there is a ratio of 2:1 on the capacity of the winch. Our Super Heavy Duty Hand Winches fall slightly below that ratio, so a nice electric winch will be your best option. I'd suggest we go a little bigger than that ratio to account for steeper inclines and other variables with the Bulldog Winch Trailer Winch with Wire Rope, # BDW15019. It's 1.8 hp, permanent magnet motor...
    view full answer...
  • Will the etrailer.com Round A-Frame Trailer Jack Fit on a 2012 Keystone Outback 250RS
    As long as the mounting points on the A-frame of your 2012 Keystone Outback 250RS are right at about 3 inches apart from each other, and the center hole does not have a diameter bigger than 2-1/4 inches, the etrailer.com Round A-Frame Trailer Jack, part # TJA-5000S-B, will fit perfectly, as it uses an industry standard mount. This jack has a lift capacity of 3,000 lbs and a support, or static, capacity of 5,000 lbs so you will want to keep that in mind when loading up your Outback....
    view full answer...

Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Dustin K
Installed by:
Cole B
Installed by:
Randy B
Updated by:
Sarah W
Updated by:
Ronnie R
Updated by:
Hannah L
Updated by:
Mike S
Written by:
Amanda M
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.