Pro Series Detachable Footplate w/ Pin for 2" Diameter Jacks - 2,000 lbs to 5,000 lbs

Pro Series Detachable Footplate w/ Pin for 2" Diameter Jacks - 2,000 lbs to 5,000 lbs

Item # PS1400700340

lowest price pledge

Our Price: $16.73

Accessories and Parts

Orders above $99 qualify for Free Shipping

Shipping Weight: 1.84 lbs

Quantity: 
In Stock, Ships Today
PS1400700340 - 2 Inch Diameter Tubing Pro Series Accessories and Parts
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Customer Photos


  • Trailer Jack
  • Camper Jack
  • Jack Foot
  • Pro Series
  • 2 Inch Diameter Tubing
Removable, corrosion-resistant footplate fits jacks with 2" diameter tubing and is rated up to 5,000 lbs. Call 800-298-8924 to order Pro Series accessories and parts part number PS1400700340 or order online at etrailer.com. Free expert support on all Pro Series products. Guaranteed Lowest Price and Fastest Shipping for Pro Series Detachable Footplate w/ Pin for 2" Diameter Jacks - 2,000 lbs to 5,000 lbs. Accessories and Parts reviews from real customers.


  • All Info
  • Reviews (337)
  • Q & A (53)
  • Videos (2)
  • Photos
  • Why etrailer?

Pro Series Accessories and Parts - PS1400700340

Removable, corrosion-resistant footplate fits jacks with 2" diameter tubing and is rated up to 5,000 lbs.


Features:

  • Footplate detaches easily
  • Corrosion-resistant zinc finish
  • Pin included


Specs:

  • Fits: jacks with 2" diameter tubing
  • Height: 2-1/10"
  • Capacity: 5,000 lbs
  • Limited 1-year warranty


1400700340 Foot Plate with Pin - 5,000 lbs

1400700327 Fulton Removable Footplate and Pin Assembly






California residents: click here


Video of Pro Series Detachable Footplate w/ Pin for 2" Diameter Jacks - 2,000 lbs to 5,000 lbs


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Pro Series Round Topwind A-Frame Jack Review

Today, we're going to be reviewing and installing the pro series round A-frame jack with the topwind handle rated at 2000 pounds part number PSEA20000103. We're also going to be using the pro-series detachable footplate part number PS1400700340. The utility jack is going to be ideal for agricultural and commercial applications. It's going to feature precision fit parts that provide exceptional stability and reliability. They're get it as a weld on 00:00:31 or bolt on bracket. The outer and inner tubes are made from a steel construction with a black paint finish.

The clears 00:00:39 that we have from the mounting bracket to the top of the jack is going to measure 11 inches. The jack features a lift capacity of 2000 pounds. The topwind handle has a smooth ergonomic design for easy cranking and the jack is going to feature a lift capacity of 2000 pounds. We already go the previously installed jack removed. We're going to go ahead and install our new Pro Series Jack. We'll just take it and slide it into the mount location.

You can see there with a fully seated. The existing holes are going to line up well with the new holes of our jack. These are going to be your industry standard hole pattern separated center on center by 3 inches. To get our jack secured, we're going to go and use our existing hardware. The was the same hardware that was used to mount the previously installed jack. You can also choose to weld this on.

If you don't already have hardware and you want to bolt it on, the instructions will direct you what style of bolts and washers to get to fully mount the jack of your A frame coupler. Once we have those frames tight, just use our socket wrench and finish the tightening process. Now, your next step would be to go ahead and thwart this down to the specifications listed in the manufacturer's instructions. For our demonstration today, we're just going ahead and leave them installed the way they are. That way, we can go ahead and go over the rest of the features.

Now, we're going to go ahead and get ready to install our footplate. The footplate's going to be installed on the bottom of the jack. Again, it is sold separately. All you have to do is place it around the base. Line up the holes and then insert the included pin and clip. Now, we're going to lower our jack that way, we can remove the jack stands. It has a really nice topwind handle on it. Another neat feature about the handle is that when you're not using it, you can actually flip it over to a stowed position and then just flip it back out when you want to use it. With the jack in the fully extended position from the mounting point to the base, it's going to give us a full extension of 22 inches. The fully retracted position, that measurement is going to measure 8 inches which is going to give us a lift of 14 inches. The inner tube is going to give us a diameter of 2 inches. The outer tube is going to measure 2 and a quarter in diameter. If we take a measurement from the outer most point of the handle to the center of where the handle mounts, that's going to give us a measurement of about 7 and one quarter of an inch. That measurement's good to know in case you have items mounted to your A-frame cuff just like we do with our toolbox here and you can see here, it's going to give us plenty of room. Again, that measurement is 7 and one quarter. That's going to do it for today's review and install of the Pro Series Round A-frame Jack with the topwind handle rated 2000 pounds part number PSEA20000103. .


Customer Reviews

Pro Series Detachable Footplate w/ Pin for 2" Diameter Jacks - 2,000 lbs to 5,000 lbs - PS1400700340

Average Customer Rating:  4.8 out of 5 stars   (337 Customer Reviews)

Removable, corrosion-resistant footplate fits jacks with 2" diameter tubing and is rated up to 5,000 lbs.

- PS1400700340
by:

Found just I was looking for, website is great. My order shipped sooner than I expected and I had it in 3 days. Great service again from etrailer, I will be back. 637514



- PS1400700340
by:

Nice foot with nice clip. Fits the ultimate trailer jack perfectly 628838



- PS1400700340
by:

This is the Air Jordan of trailer feet. After installing this my tow vehicle picked up 5 mpg and has quite a bit more power. The benefits of owning such a fine piece of trailer footwear has brought me good health a great job and a wife that gives me back rubs every night. Ok....maybe a slight stretch but it does work good. 616372



- PS1400700340
by:

Fits perfectly 616307



- PS1400700340
by:

I really like the fact that it's stainless, and is not a permanent fixture on the trailer. Mounting was simple, and I have had no issues with the foot since installation. My only reason for four instead of five stars is the fitment of the foot. It doesn't fit very snug around the 2" post of my trailer jack. It would be a nice addition to include sleeves or collars to shim up the mount to reduce the eventual effect of wear the excessive movement will cause. 594343



- PS1400700340
by:

Easy installation, good design and craf tsmanship. 559017



- PS1400700340
by:

Works perfictly. 571928



- PS1400700340
by:

Simple to use and easy to remove when wanting to go with a wheel for moving trailer 443634


Comments

All is great and I will try to give more reviews as I have time.

Randy H - 10/18/2018

44759

- PS1400700340
by:

Nice value, sizable foot plate... The used trailer came with just the pipe in the jack, this was a must have. The jack on the trailer is a fulton and the bottom of the jack extension pipe is smashed a bit, so I was worried about this fitting and at first I was concerned it was not going to go on but with some encouragement from a large hammer it went on. And, now has the added bonus of never falling off even if the pin is removed and it will surely never rattle. I thought about getting the 2 1/4" version but am glad I took a chance on this 2" one. 160071



- PS1400700340
by:

Perfect fit for my used 2007 Adam 2-horse trailer, installation took about a minute, couldn't be simpler! 93175


Comments

Fine - Seems to be holding up OK

Michael B - 02/02/2015

9216

- PS1400700340
by:

My trailer came with a basic jack that had basically a pipe at the end. Needless to say, that bugger kept hitting my driveway apron and was ripping up the concrete. I purchased one of these footplates and problem solved - it still hits of course - but this keeps it from gouging out chunks of concrete. Great product, fair price, and it exactly what I needed. Thanks eTrailer! 136065


Comments

Works great, just want I needed.

Dan H - 06/17/2015

12576

- PS1400700340
by:

Not a lot to comment on with this thing. What I'm really interested in is its durability and corrosion resistance, but it's much too soon to comment on that. One thing that could help is some holes in the foot so that it does not pool water, and I could drill them myself, but then their inside edges would not have the galvanization and would rust quickly. I also don't like the design of the the wire latch that locks the retention pin in place - it is too wide, so hangs over the edge of the foot. No reason for it to be so wide, though hard to imagine how it will be a problem. I took away one star for these minor, nit-picky issues, but overall it looks like a good product and I expect it to last a long time. 211286



- PS1400700340
by:

Perfect fit and quality product 656819



- PS1400700340
by:

good foot 655522



- PS1400700340
by:

Holding up and working well! 654368



- PS1400700340
by:

Quality looks good and it fits perfectly,all at a great price. 653563



- PS1400700340
by:

As advertised, As always.. A++ 641748



- PS1400700340
by:

Good quality at a low price delivered quickly. Great! 638088



- PS1400700340
by:

The part was part of a repair on my trailer that broke a leaf spring and it fit perfectly. 634851



- PS1400700340
by:

IT WAS GREAT, LESS THAN 15 MINUTES TO INSTALL, THANK YOU CAROL C FOR ALL YOUR HELP IN THE QUICK CHANGE IN THE COATING OF THE JACK, GREAT MOVE FOR A FASTER DELIVERY DATE! PS. I WOULD LIKE TO ORDER THE CASTER FOR THAT JACK MODEL FOR DIFFERENT GROUND APTS. THANK YOU VERY MUCH . 634310



- PS1400700340
by:

Easy to install. Very stabilizing and well constructed. Looks like it will last a long time and easily support the load. 633198



- PS1400700340
by:

Does the job, seems pretty solid with a good weld. 616648



- PS1400700340
by:

The product was exactly as described, brand new and fit perfectly based off the given dimensions. This was installed on a Pro Series Round A-frame Jack Topwind 15" ; 5,000 lbs. No complaints. Shipping was fast (two-day) and came a day earlier than expected. Great company with great products at great prices. Thanks! 614455



- PS1400700340
by:

Fit perfectly 611915



- PS1400700340
by:

This footplate saves the bottom of the jack from getting bent or beat up and keeps the tongue more stable. With the pin and clip you can easily remove it when not in use so nobody steals it. I'm putting one of these on all my trailers. 608188



- PS1400700340
by:

a 604727



- PS1400700340
by:

Worked well 598045



- PS1400700340
by:

Foot plate is heavy and well constructed. Perfect fit for my jack - easy install. 593301



- PS1400700340
by:

My leveling jack broke on my camper/ice shanty as I was preparing for hard water to thicken. I remembered ordering parts from etrailer when I was building it 4+ years ago. My experience with you back then was excellent as it was this time. Thanks for the quick service and the great products. - Curtis W. 592981



- PS1400700340
by:

Inexpensive foot plate, use silicone to keep it quiet. 592490



- PS1400700340
by:

Its for my 10 foot trailer that hauls my four wheeler and my sxs,it fits 584857



- PS1400700340
by:

Great product 584677



- PS1400700340
by:

Does the job. Fast ship 568842



- PS1400700340
by:

Exactly what I needed. Delivered on time and the prices were very competitive if not cheaper than others I looked at. Thank you. I'll be a returning customer as needed. 567774



- PS1400700340
by:

This jack is precisely what I was looking for - solidly constructed, easy to install, easy to use. The ability to raise and lower the outer tube is great - it saves a lot of cranking when hitching/unhitching and also allows me to drop the jack below my tailgate height when trailer is attached so I can open tailgate with interference from jack. Because my business partner and I both tow the trailer this jack is being used on and our vehicles do not have the same hitch height, the adjustability is a great help in this area as well. 551119



- PS1400700340
by:

Sturdy built. Easy to install and remov e. 550801



- PS1400700340
by:

Sturdy built. Easy to install and remov e. 550799



- PS1400700340
by:

My trailer never came with a foot and this was quick & easy install. It definitely helps when jacking up my atv trailer in Florida dirt/ muck/ sand. I had to persuade it to fit but I feel that it was more my jack than it was the footplate. 548526



- PS1400700340
by:

Fit perfect. I always order and get great products from etrailer. They have always helped with any questions and have helpful videos. Customer service is the best of any company I ever deal with! 547700



- PS1400700340
by:

Worked as described. 544586



- PS1400700340
by:

This was purchased in conjunction with Round A-Frame Trailer Jack - Sidewind - 15-5/8" Travel - 5,000 lbs - TJA-5000S-B. Arrived quickly, and fit perfectly. I won't have to use a board or the wheel anymore. 541849



- PS1400700340
by:

one year after and I'm happy with my purchase...good quality. 540738



- PS1400700340
by:

No complaints 526188



- PS1400700340
by:

Exactly what I needed for the jack leg on my trailers. Fits well. Price is reasonable. 513664



- PS1400700340
by:

Nice sturdy unit. 508581



- PS1400700340
by:

Bought cable and two other items. Just as pictured and described. Web site is GREAT for finding what I want, quickly. Service also great. Shipped the day I ordered. Here in 2 days. 506310



- PS1400700340
by:

Good fit 503901



- PS1400700340
by:

Rec'd and all in good order. 501734



- PS1400700340
by:

Great Price! Great Product! Bought 6 for our fleet of trailers. 497657



- PS1400700340
by:

Delivery was fast. Product was an easy ,perfect fit. More sturdy than the wheel it replaced. 493876


50
340
Show More Reviews

Ask the Experts about this Pro Series Accessories and Parts
Do you have a question about this Accessories and Part?


  • Height of Buyers Products A-Frame Jack # 3370091265 without Handle
  • I went out to our warehouse to take a look at the Buyers Products A-Frame Jack # 3370091265 referenced in your question. I measured a height from the mounting bracket up to the top of the tube (before the handle) of just about 9-1/2 inches. I have attached an image to assist. To get the clearance measurement you're needing you likely will need to move down to a 2,000 pound topwind jack (if possible for your trailer's tongue weight). For this I recommend taking a look at the Pro Series...
    view full answer...

  • A-Frame Jack Recommendation for Travel Trailer with Propane Tank Right Behind Jack
  • As far as the Ultimate Trailer Jack # 322-RDJ-2K goes the design, and more specifically the placement of the pin, is placed close to the mounting point of the jack because that is where the jack is most stable. As far as I know they are not yet making one that would work out well for your travel trailer. Your best option is a different jack that doesn't stick down so far below the trailer frame. Bulldog 3K jack # BD1550101344 is one option. Without a footplate on it measures 7 inches...
    view full answer...

  • Fulton F2 Swing-Up Jack for a [email protected] TAB Tear Trailer with a 1.5
  • I think the Fulton F2 Swing-Up Jack is a good choice. The model for 4 - 5" frames is # F1413140334. The 1600 lb. tongue weight rating is much more than you need, but won't affect the function of the jack. The height will work and it will get the jack level with the tongue when traveling. My only concern would be that you have enough space on your frame for the jack to swing up. You will need approximately 25" of frame space that is free from other accessories to allow the jack to swing...
    view full answer...

  • Recommended Trailer A-Frame Coupler and Jack for Coleman Royale Destiny Pop-Up Camper
  • For your son's Coleman Royale Destiny Pop-up, I recommend the Demco A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Black - 2" Ball - Bolt On - 10K # DM14793-81 because it is an easy bolt on installation for 2 inch hitch ball compatibility. A more economical option is the weld on A-Frame Trailer Coupler - Yoke Latch - Black - 2" Ball - Weld On - 8,000 lbs # CA-5210-B. Both have the trailer jack attachment point for easy mounting of your jack to raise and lower the trailer tongue....
    view full answer...

  • A-Frame Jack Replacement for a Carry On 5x10LGW2K Trailer
  • I looked up pictures of your Carry On 5x10LGW2K trailer and it uses a standard A-frame design so for an easy replacement the Pro Series Jack part # PSEA20000103 would be a great topwind option just like what came on the trailer. For a caster wheel you would want the part # PS1400750340 or for just a standard foot plate part # PS1400700340.
    view full answer...

  • Recommended A-Frame Trailer Jack for Bottom Mount Trailer Application
  • For your trailer jack, I recommend Bulldog A-Frame Jack - 5,000 lbs - Top Wind # BD175000 which will be an easier installation than a sidewind option on your trailer based on the photos. If you prefer the sidewind style, it can absolutely still be used. For this, I recommend the Round A-Frame Trailer Jack - Sidewind - 15-5/8" Travel - 5,000 lbs # TJA-5000S-B. The installation of a sidewind will require disassembling the jack because the gearbox wouldn't otherwise clear the installation...
    view full answer...

  • 2000-lb A-Frame Jack to Replace Atwood 80274
  • Based on my research the Atwood jack 80274 was an A-frame type side-wind tongue jack with a 2K weight rating. The Pro Series jack # PSRV20000103 that you referenced is a suitable replacement for this discontinued product. The Pro Series offers a 2K weight rating, 14-inches of lift and measures 13-inches from the mounting bracket to the top, excluding the handle. This jack does not come with a wheel or foot plate but you can use either wheel part # PS1400750340 which will reduce...
    view full answer...

  • Tubing Diameter of Pro Series Round A-Frame Jack PS1400600303
  • It is always best to use a jack (or winch, for that matter) that is rated for more weight than you're actually going to put on it. This typically allows such products to work more reliably and to also last longer. The Pro Series 5K a-frame jack you referenced, part # PS1400600303, has a 2-inch diameter inner jack tube and an outer jack tube with a diameter of 2-1/4-inches, as noted in the specs. Since this jack does NOT include a caster wheel or a foot plate, you can select along...
    view full answer...

  • Recommendation for Replacement Jack Foot for a 5,000 Pound A-Frame Trailer Jack
  • Sounds like your trailer's weight is too heavy to support the use of a jack caster wheel. I would instead recommend the Pro Series Footplate # PS1400700340. This has a capacity of 5,000lbs and will fit the 2 inch jack tube diameter. The Wide-Track Wheel Assembly for Fulton F2 # F500266 that you referenced would be a good choice if the jack you had a Fulton F2 A-frame jack # F1413250334. Since you do not have an A-frame F2 jack I would not recommend it for you, because it is specially...
    view full answer...

  • Is an Extendable Foot Available for Pro Series Round Topwind A-Frame Jack # PS1400600303
  • We do offer a foot plate for the referenced Pro Series Round Topwind A-Frame Jack # PS1400600303. The jack does not include any foot plate or wheel but both are available. I have linked a video on this Pro Series item. The foot plate is part # PS1400700340 and it includes the pin to secure it to the inner tube of the jack. We also offer a caster wheel attachment rated at 1200-lbs, part # PS1400750340, which also includes the pin to secure it to the inner tube of the jack. Note that both...
    view full answer...

  • Can Robofoot Be Replaced With Another Extension Foot On Atwood Premier Performance Power Jack
  • The Robofoot extension that comes with the Atwood Premier Performance Series Power Jack, part # AT81068, provides a 6 inch extension. We do not have an extension that would be comparable in length to the Robofoot for the AT81068, but we do have other feet that would work if you are just looking for a foot. For a footplate that would work with the AT81068 I recommend part # PS1400700340. The footplate fits 2 inch jack tubes, and has a weight capacity of 5,000 lbs. I called my contact...
    view full answer...

  • Recommended A-Frame Trailer Jack for 7000 lb Trailer
  • You will need to choose a jack whose capacity exceeds the fully loaded and ready to tow tongue weight of your trailer. Typically trailer tongue weight is 10-15 percent of the weight of the trailer. This means that when loaded to maximum, your tongue weight would vary between 700 and 1050 lbs. I recommend the Bulldog A-Frame Jack, part # BD1550101344. A foot is available, part # PS1400700340. A caster is also offered, part # BD500245. Keep in mind that once a caster is added the capacity...
    view full answer...

  • Low Clearance A-Frame Trailer Jack that Can be Fitted with a Wheel or Footplate
  • The footplate for Bulldog rack and gear jack # BD165111 is welded to the foot and cannot be removed but I do have some recommendations for you. First, take a look at Pro Series jack # PS1401000303. The mounting bracket is very low relative to the bottom of the jack tubes, 5-1/2 inches. You can use footplate, # PS1400700340 and wheel # PS1400750340. The wheel is rated for 1,200 pounds so it would limit the jack capacity to 1,200 pounds also. And we also have Bulldog jack # BD155033...
    view full answer...

  • Recommendation for an A-Frame Horse Trailer Jack with 15 Inch Lift and 5,000 Pound Capacity
  • If you are looking for another A-Frame jack, we have the new Pro Series Round, A-Frame Jack - Topwind, # PS1400600303, with 15 inch lift and 5,000 pound capacity. The mounting bracket on this jack uses the same hole spacing as the Bulldog Jack, # BD1700100317, that you have referenced. You can attach a wheel, # PS1400750340, or a footplate, # PS1400700340.
    view full answer...

  • Footplate Recommendation to Replace Wheel Caster on Trailer Tongue Jack
  • The Pro Series Footplate, part # PS1400700340, is a great choice for a replacement footplate on your trailer jack. The footplate features a snapper pin so no additional clip is needed to secure the foot. I've linked a video for you to take a look at.
    view full answer...

  • Is a Support Plate Needed When Installing Bulldog A-Frame Trailer Jack # BD1550101344
  • It would be a good idea to add a support plate, like # BDSPB50, when installing A-frame jack # BD1550101344. The plate can be welded or bolted on. This plate fits on the underside of the trailer. The jack will then bolt into place. If you need a foot use # PS1400700340 or for a wheel use # PS1400750340.
    view full answer...

  • Making Jack With Wheel Compatible with Footplate or Caster Wheel
  • If you want to cut your current jack, you can do that and then drill a hole for the foot and or wheel. For a wheel, you can use the Pro Series 6", Detachable Caster w/ Pin for 2" Diameter Jacks - 1,200 lbs # PS1400750340 and the Pro Series Detachable Footplate w/ Pin for 2" Diameter Jacks - 2,000 lbs to 5,000 lbs # PS1400700340. If you just want to replace the jack, you can use the Bulldog Round, Snap-Ring Swivel Jack - Bolt On - Topwind - 10" Lift - 2,000 lbs # BD151443.
    view full answer...

  • Foot Plate Recommendation for Pro Series Jack # PSRV20000103
  • For a foot plate that fits your Pro Series Jack # PSRV20000103 the part # PS1400700340 is the recommended plate. The # JF-1005H-Z fits other brand jacks and would not be the correct one to use.
    view full answer...

  • Foot Plate Recommendation for Bulldog Jack # BD1500520317
  • For the Bulldog Jack with no mount we have the part # BD1500520317. For a foot plate you then would want the part # PS1400700340 which is a confirmed fit and unlike a wheel would not diminish the capacity of the jack.
    view full answer...

  • What are the Dimensions of the Outer and inner Tubing of Trailer Jack # PS1401000303
  • I went out to the warehouse to measure the Pro Series Round, A-Frame Jack, # PS1401000303. The outer tube is 2-1/4 inches in diameter. The inner tubing is about 1.97 inches in diameter. This jack does not come with a wheel or footplate. For a wheel, you can use # PS1400750340. For a foot plate, you can use # PS1400700340.
    view full answer...

  • Is Footplate from Shelby 5793 Jack Compatible with Pro Series Round, A-Frame Jack # PSEA20000340
  • Footplates for trailer jacks tend to be universal so I would be surprised if the one from your Shelby wasn't compatible with the Pro Series Round, A-Frame Jack # PSEA20000340 that you referenced. The Pro Series Detachable Footplate # PS1400700340 that was made to go with this jack has the standard 1/4" pin so if the footplate from your Shelby has a 1/4" pin and has a tubing diameter of 2" on the jack itself then you can most certainly use your old footplate with the Pro Series jack.
    view full answer...

  • Replacement Trailer Jack Recommendation for a 2005 Haulmark Transport 6X10
  • I looked up some pictures of your trailer and it looks like the style of jack that came on your trailer is an A-frame style jack like part # PSRV20000103. This would be a great jack to use as a replacement as it should replace what you currently have and has plenty of capacity. I feel confident recommending this jack because of how many positive reviews it has as well. You may also be interested in a wheel caster part # PS1400750340 but should note that it would reduce the capacity...
    view full answer...

  • Replacement Foot for 2" Trailer Jack to Help Lower the Foot Faster
  • Since the Pro Series Detachable Footplate part # PS1400700340 fits a 2" jack I have the perfect solution for you. The Fastway Flip Automatic Fold-Up Jack Foot # FA88-00-6525 is a folding jack that gives your trailer jack a 6" extension so that you have less work to do. Keep in mind this does have a 1,400 lb weight capacity so if your jack is rated for a higher weight capacity this folding foot will be the limiting factor.
    view full answer...

  • Recommended Top Wind A-Frame Trailer Jack
  • The mounting bracket we sell for the Bulldog Round Jack, part # BD150000, you mentioned is not the weld on style triangular bracket you asked about. It is the Mount Tube for Bulldog Round Jack, part # BDPG9810-00. This attaches to the outer tube of the jack and has a round mount with a pin to secure it into place. I may have another option for you. I recommend the Pro Series Round A-Frame Jack, part # PS1400600303. This jack has a 5,000 lb lift capacity and has the triangular plate already...
    view full answer...

  • Removing Caster of Bulldog Rack-and-Gear Jack # BD165211
  • According to Bulldog, the caster wheel of the # BD165211 could theoretically be removed, but it is not recommended. If the bolt holding the caster is removed, and the caster is slid off the tube of the jack, there are washers and ball bearings that will fall out of the bottom of the jack that will be very difficult to replace. This jack was not designed to have the caster removed and replaced with a foot plate. The Pro Series # PS1401000303 might be a good option. From the mounting...
    view full answer...

  • Will Pro Series A-Frame Trailer Jack # PSRV20000103 Fit a Haulmark Trailer
  • The bolt pattern to mount an A-frame jack is a standard and the Pro Series jack, # PSRV20000103, also has slotted holes to allow for some variations in the pattern so it should work fine for you. Make sure that your current jack has an outer tube diameter of 2-1/8 inches so the new jack will fit. The Pro Series jack does not come with a foot or wheel. Your old foot might work if it fits around a 2 inch diameter lower tube. If you need a new foot use # PS1400700340. For a wheel use #...
    view full answer...

  • Replacement A-Frame Jack for Forest River A-Frame Pop Up Trailer 17
  • I pulled up pictures of your Forest River A-Frame pop up trailer 17 and it has a very standard a-frame jack on it that we can easily help you replace. The trailer does seem to have a very low ground clearance so that would be the most important feature to accommodate. Take a look at Pro Series jack # PS1401000303. The mounting bracket is very low relative to the bottom of the jack tubes, 5-1/2 inches. You can use footplate, # PS1400700340 and wheel # PS1400750340. The wheel is rated...
    view full answer...


Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Written by:
Lindsey S
Expert Research:
Jameson C
Video by:
Jacob T
Updated by:
Laura H
Video Edited:
Dustin K
Photos by:
Amber A
Photos by:
Sam P
Installed by:
Randy B
Updated by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.