Don't Miss These Holiday Savings!
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Ideal for multiple agricultural and commercial applications, this standard A-frame jack features an 8" retracted height and measures 11" from the mounting bracket to the top, excluding the handle. Removable jack foot with pin included.
Features:
Specs:
A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.
Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.
Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (788 Customer Reviews)
Ideal for multiple agricultural and commercial applications, this standard A-frame jack features an 8" retracted height and measures 11" from the mounting bracket to the top, excluding the handle. Removable jack foot with pin included.
It works perfect for our trailer right out of the box and is continuing to work for us. Thanks so much.
Still holding up just fine. My son-in-law cut the other off welded this one on and painted the weld. It has made a few trips to the local dump without problems.
This is a great quality jack. Fast shipping and excellent customer service.
this jack is just what I needed to finish my trailer.It was just perfect
The quality of the jack was very good, but I had to modify them one of the holes to install it on my camper.
Overkill for my little 5x8 utility trailer, but it looks and works great!
Looks like it will work haven’t tried it yet
Lois
2/22/2023
Still working great
Exactly what I was looking for at a great price! Only reason it didnt get 5 stars was no mounting hardware although it did say that when I purchased it.
I have ordered several items from E-Trailer and have been very satisfied with the product as well as the delivery time frame of the products ordered. I was not sure about ordering items for my trailer off a web site , but their description of the item was so detailed enough to give me confidence that the item I ordered would work. Everything I ordered from tail light lenses to my last order of a new jack stand worked perfectly. In the future I will not hesitate if I need an item for my trailer I will use E-Trailer.
Jack stand works well on my 10'x6' single axle trailer. Large foot prevents the jack from sinking into the dirt. It installs easy with 3 bolts. Lifts with little arm effort. Rust prevention is good.
Extending only 22" seems not enough for a standard hookup to a truck hitch. Do you have something similar that extends further? 2,000lb enclosed trailer.
Thank you.
Rachael H.
9/6/2019
For that range of capacity of jack about 14 inches of lift and 22 inches of travel seems about normal. We do have some options if you go up a brackets to the 3,000 capacity jacks that have up to 28-12 inches of total lift. I have provided a link below for your reference: If you wanted to add a leg you might be able to use the Bulldog BD500377. It is made by the same parent company and should fit your existing Pro-Series Jack for the correct diameter, but I am not sure that the Pro Series has enough vertical clearance inside the jack, and not sure what your usual ground clearance is for this jack it may not allow for this leg to be installed. The overall length of this leg is 13-14 inches, so you could do a quick measurement to make sure it will work for your trailers ride height., and the internal clearance of your existing jack. The outer tube diameter is 1-34 to also check with the footplate of your existing
Helpful Links
Accessories-and-Parts/Bulldog/BD500377.html
dept-pg-Trailer_Jack-pt-Standard_A~Frame_Jack-sz-Drop_Leg-pc-Topwind_Jack.aspx
I was impressed by etrailer. The day after ordering the tongue jack, I received notice that the shipping had been upgraded to 3-5 days, I received the order in three days.
If there was any negative aspect, it would be that the order didn’t include mounting hardware. I must have missed any mention of this. There’s nothing special about the hardware, so I had what I needed squirreled away.
Installation is complete and the jack works great.
Thanks.
Smooth operating jack, easy installation. I replaced the hairpin clip on the removable foot with a bolt and locknut, the hairpin clip makes it too easy for vandald to steal the foot.
I purchased 2 of these Jacks as a part of a cart I built for my cabinet shop. I needed a cart that would carry about a dozen sheets of plywood, has all-terrain tires to go easily in a gravel driveway. The jacks are used to keep the cart from moving and twisting when loading and unloading. I am very pleased with the fast and professional service I received from eTrailer. Also great pricing.
Very high quality jack. I bought a side mounted jack at a local store but really wanted an a-frame. This jack is exactly what I wanted. Easy to mount, simple, and works perfect!
Sidenote: I was confused by the mention that there was no drop leg included. I don't know what a drop leg is apparently. There were definitely no parts missing required for basic use. Product met my highest expectations!
Etrailer worked with me when the unit I ordered was on back order. This unit fills the bill perfectly. Quality is good and it works as expected.
Lance H.
12/15/2017
Thanks for checking. The Jack is working just fine.
Fit right in my trailer tongue. Had to drill for mounting bolts. Easy to use.
Our A-frame jack was damaged and we went to etrailer looking for a replacement. Found the correct jack to fit our camping supply trailer and our budget.
Perfect fix only took 10 min install better then factory jack
Bill
6/15/2018
better then oem
This was bought to replace old drop foot, bolted right to tongue of trailer where old one had been works great I really like the foot on the bottom, thank you e-trailer once again you came through for me I will continue to order products from you.
These jacks were just the ticket after one of our trailer jacks got destroyed in service. Thanks to etrailer for great selection, and quick delivery!
Purchased these to add to my 5x14 ATV trailer,. They install easy 11/16 hole and push them. Very bright and look good to. As always great service and fast shipping.
The jack replaced one that had been bent by a novice trailer user. Left it extended and drove off. Damaged such that it would not retract at all. The new one bolted on easily. Regular delivery (up to 10 days, only took 2).
And they wonder why we buy stuff online.
Neal
tongue jack works well and looks good, would be nice if it come with mounting bolts.
Received product very quickly, trailer jack fiinstalled perfectly, instructions on outing jack together were useless! Had to figure out assembly by trial an era!!
Do you have a question about this Trailer Jack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Janet L.
8/13/2023
I sold the trailer about 2 months ago. At that time it worked fine and we never had problems with it.