Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
(387 reviews)
Price: $144.35
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
Item # 84546UC3
Our Price: $144.35
This item qualifies for Free Shipping
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
In-stock alternatives that can ship today
- All Info
- Reviews (387)
- Q & A (0)
- Photos
Dexter Trailer Hubs and Drums - 84546UC3
- 5 on 4-1/2 Inch
- For 3500 lbs Axles
- Hub with Integrated Drum
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Standard
- Dexter
This hub-and-drum assembly fits 3,500-lb axles with #84 spindles. Compatible with electric or hydraulic brakes. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.
Features:
- Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
- Compatible with electric and hydraulic drum brakes
- Sturdy iron construction
- Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included
- Hub and drum are made in the USA
Specs:
- Application: 3,500-lb trailer axles with #84 spindles
- Drum dimensions: 10" diameter x 2-1/4" wide
- Works with 10" brake assembly
- Bolt pattern: 5 on 4-1/2"
- Grease cap flange diameter: 1.986"
- Wheel bolt diameter: 1/2"
- Weight capacity: 1,750 lbs
Bearing, Race, and Seal Information
- Bearings (included)
- Inner bearing: L68149 (1.378" inner diameter)
- Outer bearing: L44649 (1.063" inner diameter)
- Races (included)
- Inner race: L68111
- Outer race: L44610
- Grease seal (included): 58846
- Inner diameter: 1.719"
- Outer diameter: 2.565"
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
K08-247-90 Dexter 10" Trailer Hub and Drum Assembly for 3.5K Axle with Hardware - 5 on 4-1/2
Replaces 84546UC3 and 84546-KIT
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Did not arrive in time
Customer Reviews
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - 84546UC3
Average Customer Rating: 4.8 out of 5 stars (386 Customer Reviews)
This hub-and-drum assembly fits 3,500-lb axles with #84 spindles. Compatible with electric or hydraulic brakes. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.by: Chaz07/16/2022
Initially ordered the wrong diameter hub assembly. Return was quick. Ordered the correct assembly. Greased the bearing, applied seal and installed Hub and drum assembly. Thanks to the FAQ on giving instructions how to order the correct bearings. Assembly is torqued and ready for the road.
by: G & G03/28/2024
Genuine Dexter drums. Made in the USA. Fit perfect. Included bearings, races, cap and lug nuts.
by: Jeff12/03/2022
Great product would never shop anywhere else. I never need to worry about this product failing. We went over the Rockies twice with our open car hauler.
by: Robert 07/05/2022
Tows like a dream. With the trailer attached is just like driving with no trailer at all. Brakes are responsive and smooth. Just on additional note: I replaced all 4 of the electric drum brakes with Dexter Electric Trailer Brake Kits. All bought from etrailer, all fit perfectly. No problems! Very happy with the product and the results.
Robert
7/6/2023
Still tows like a dream. With the trailer attached is just like driving with no trailer at all. Brakes are responsive and smooth. Just on additional note: I replaced all 4 of the electric drum brakes with Dexter Electric Trailer Brake Kits. All bought from etrailer, all fit perfectly. No problems! Very happy with the product and the results
by: Mike G.06/26/2013
I got these drums in to replace some old ones. the only thing I miss is the adjustment hole. But being an over cautious tower I inspect my trailer brakes often. Installed yesterday and they worked great. Ordered on a Sunday and received on Tuesday - but I live in the same shipping -zone I believe - got some great LED trailer lights as well. Image shows product installed.
by: Pat k.09/08/2016
Great product and price . Next time I'll buy complete kit , brake shoes,magnets, drums etc.
I bought everything separately .all in one is cheaper . Brakes on my airstream are better than new!
Picture is old brakes and magnets I replaced at same time with new drums and bearings.
Pat K.
9/8/2017
Good so far but havent been out much yet.
by: Craig04/04/2020
Did a complete 4-wheel brake replacement on my 2010 Springdale 26', 5th-wheel. OEM Dexter drums and OEM Dexter Never-Adjust Electric Brake Kit. Spoke with etrailer rep and confirmed correct parts for my rig. Ordering was easy and delivered free in 4 days. Used the 4-days to remove old parts, clean under rig, maintenance to slide-out, etc. much easier with tires out of the way. Parts arrived and about 8 hours of work, it's all back together. Can't tell you if it works because we have not taken a trip yet. COVID19 puts a damper on traveling. But a good time to do deferred maintenance.
by: Myron05/09/2019
These hub drum assemblies came pre-rusted for me as you can see from the photos. Even with a desiccant pack in the box it didn’t help. If it were only on the braking surfaces I wouldn’t have an issue but it’s within the bearing portion of the hub also. The other issue is the thin small plastic bag that the bearings, seals, lug nuts and grease cap are supposed to be in is flimsy and tears open allowing the bearings to bounce around all over the inside of the box. A better bag would solve the problem. A quick call to Etrailer and new drums are on the way. They said they would verify no rust this time. I’m confident they will be fine this time as Etrailer has always been great to do business with in the past!
by: MustangRacer12/07/2011
Wow ! Great prices and fast shipping. Saved a ton.
I wish I had found you last year when I had to rebuild my othe Pace Shadow GT Trailer after some 150,000 towing miles. This open trailer has had a tougher life and maybe 50,000 miles.
We turned around while working on the trailer and there he was. The local turtle thinks he found a new girlfriend !!LOL Gues he likes your drums.
by: Erica M03/29/2024
super fast delivery. very nice customer service agent!
by: Dave02/14/2021
These Dexter drum kits we’re awesome. It came with everything except a new cotter key. Maybe they will start adding a cotter key to the kit in the future.
by: Darren 08/23/2023
Perfect product for our fleet of traile rs
by: Barry60402/21/2020
No problems with your drum brakes after their first season on my homemade trailer.
by: Stevy12/04/2021
Perfect fit for my 6x12 dump trailer. Good price and fast shipping. Had 1 inner bearing damaged in box, appeared to be a shipping issue. etrailer replaced it immediately.
Stevy
12/5/2022
I have been using these replacement hubs and breaks for a year now. Other than routine inspection they have been perfect, quality parts.
by: Geoffrey 11/08/2023
Fit well easy to install
by: Joe07/25/2022
Let me mention that I have always had great service and no issues from etrailer until this Dexter order. The package arrived mostly damaged, I should have taken a photo but i opened it and everything looked ok mostly at first glance. The drums were loose inside a box that was too big. When I went to install the drums I first notice an issue with rust, if it wasnt inside the bearing area then i wouldnt have cared but i spent 20 mins cleaning the non preserved drums. then i went to install the seal and noticed it was damaged. I opened the other bag of hardware and same deal, both seals damaged. I then looked at the bearings and noticed an outer bearing was damaged. At this point im in need of drums and had to buy all new drums with seals and bearings from a local farm store, but i had to buy all new drums and hardware as a kit. So now i have these Dexter drums with damaged hardware. I could not wait for replacements etc.
Brooke M.
8/3/2022
Gosh, I am so sorry to hear it went this way for you. I will send this to our customer service team right away and have them contact you as soon as possible. Thank you for reaching back out!
by: Ken 12/31/2022
Thanks to Dianna A. at E Trailer the Dexter brake kit recommended for my trailer axel was a perfect fit. The Dexter brake kit is top quality and every thing needed for easy replacement was in the kit.
E Trailer's video's and installation instructions helped guarantee the installation went smoothly
by: John05/25/2023
easy installation
by: Jefferson Cannedy04/29/2013
To anyone who is putting brakes on a trailer I got a set of electric brakes hubs bearing and seal and cap from e-trailer and everything
fit perfect. They even arrived 2 days earlier than I thought. I would recommend e-trailer over anyone else. They have the best quality
product for less and made in USA. For me if I need any trailer parts I wouldn't look any more. They have very friendly service and has someone there that not only works in office but understands and knows bearings and when you ask questions knows exactly what you are talking about. I am completely 100% satisfied with their product and service.
Jeff Cannedy
Jefferson C.
5/16/2014
everything is O K.
by: Mike I.04/26/2017
I was replacing a damaged OEM hub on my trailer's Dexter 3500lb. axle. This hub appeared in every way to be a direct replacement. It was great to have the included set of new bearings so I didn't have to worry about the condition of the old bearings. Bearings and hub install was straightforward and adjusting the bearing play was straightforward.
Mike I.
4/26/2018
The hub and drum assembly I purchased is still working well a year later. No problems to report.
by: Colin 11/06/2021
Came in good shape and with a double lip grease seal. It was good to see the MADE IN USA stamp.
Colin
11/7/2022
The drums are working well with no noticeable vibration. Appears the the drums are NOT our of round.
by: Curt C.05/15/2020
I drove my empty two axle car trailer a few times to break in the new brakes. During assembly I did not adjust the brakes tight enough, therefore the brakes would not lock up when empty. Adjusting the brakes manually is a royal pain because of the drop axle, so I let them self adjust. On my first 150 mile drive trailering a 66 Mustang, the brakes self adjusted perfectly! Great product!
Curt C.
5/26/2021
Excellent!
by: Roy Cooke07/03/2015
Recieved the parts in a timely manner. They are large heavy items and do move around the shipping box, however no damage occured. Had to purchase the nuts & lock washers to attach the backing plate to the axle. Other than that everything was included.
I used a double10Ga. wire. Brakes went on like a dream......my wife greased the bearings so that is probably why. Immediately left Michigan for Florida with a farm tractor on the trailor, checked the hub temp at every stop and experanced no problems.
"Great Stuff" Sorry no pics.
Roy C.
7/5/2016
Still doing the trick..
by: Charlie08/07/2015
I had to replace the brake drums and brake shoes and magnets on my fifth wheel. It was cheaper to buy the completely assembled backing plates along with the drums then to replace the individual parts. Etrailer had the best price of all. They were very helpful when ordering and the parts arrived in two days. The parts fit perfect and the job was easy thanks to Etrailer.
Charlie
8/6/2016
A number 1
by: Jeff H10/07/2023
Couldn’t have got it any faster. Communication was great. Don’t think I will be shopping anywhere else going forward.
25
386
Show More Reviews
See what our Experts say about this Dexter Trailer Hubs and Drums
- Replacement Hub, Drum and Brake Assembly Recommendation for 3,500 lb Dexter Axle on 2010 Jayco 24TThe hub/drum you need is the part # 84546UC3 which is a 10 inch drum that matches the bearings you have and the wheel bolt pattern you need. For brake assemblies you then would want the part # 23-469 for the right hand side and part # 23-468 for the left hand side.
view full answer... - Video to Use as Guide for Removing Trailer Grease CapI attached a link to a video that shows how to remove and reinstall a trailer hub. The first thing shown in it is the grease cap getting removed.
view full answer... - Parts Needed to Add Electric Trailer Brakes to Trailer With 3,500 lb AxleWe can get your trailer with a 3,500 lb axle set up with electric brakes, and the first thing you'll need to do is be sure your axle has a 4-bolt brake mounting flange. If not, you can have one welded to the axle beam, but if you already have one you won't need it. I'll go ahead and list out all the parts needed: - Hub and Drum: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 # 84546UC3 - Brake Mounting Flange for 2-3/8" Round Axle # 4-35 - Electric...
view full answer... - Replacement Dexter Hub with 5 on 4-3/4 inch Bolt Pattern and Inner Race L68111Based on the info you listed the correct replacement Dexter hub is the part # 84546UC3 that you referenced. This comes with the bearings and seal you need as well. The D-washer you'd need is the part # 5-23 and you'd be set.
view full answer... - Recommended Hub And Drum For A Trinton Trailer When it comes to replacing the hub and drums on your Trinton Trailer I recommend the following depending on what your bolt pattern is: The Dexter Trailer Hub and Drum Assembly for 3,500-pound Axles - 10 inch Diameter - 5 on 4-1/2 # 84546UC3. The Trailer Hub and Drum Assembly - 3,500-pound Axles - 10 inch Diameter - 5 on 4-3/4 - Pre-Greased # AKHD-5475-35-K # The Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10 inch - 6 on 5-1/2 - Pre-Greased # AKHD-655-35-EZ-K The Trailer...
view full answer... - Hydraulic Drum Brake Assembly Recommendation for Dexter Hubs # 8-247The 8-247 Dexter hub that you have is our part number # 84546UC3 which has drum dimensions of 10 inch diameter by 2-1/4 inches wide. That means that the Hydraulic Brake Assembly Set part # AKFBBRK-35-D that you mentioned will fit and work well. 45 to 50 lbs is the recommended torque rating for the 4 bolts that hold 10 inch brake assemblies like these.
view full answer... - Replacement Brake Shoes for 10 x 1-3/4-inch Brakes on 22-Foot Travel Trailer with 3500-lb AxlesWe offer replacement brake shoes for 10 x 1-1/2- and 10 x 2-1/4-inch electric drum brakes but no longer for the 1-3/4-inch width you reference. Dexter part # bp04-065 you referenced is a set of replacement brake shoes for electric trailer brakes normally seen on Dexter 2.8K axles. I was not able to find any brake part with the reference number 1530114. It does sound like an update is in order. If you want to replace your brake assemblies and hubs/drum assemblies you will need to match...
view full answer... - How to Pick Out a Replacement Hub For a Trailer with Timken BearingsIn order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out. Since your Timken bearing don't cross reference with the bearings we carry your best option to see if there is a hub available would be to take some measurements...
view full answer...
- Parts Needed to Add Electric Drum Brakes to 6 x 12 Single-Axle TrailerAdding electric drum brakes to your single-axle trailer requires a few components, including brake flanges, brakes, hub/drums, wiring, a breakaway kit and a brake controller. Each of these is detailed in the linked article which covers the entire process. Brake flanges must be welded on perfectly straight and concentric or you can have trailer tracking problems, premature tire wear or other issues. Specialized jigs are required. Since you have welding experience as long as you have the...
view full answer... - Options for Adding Electric Brakes to Trailer Axle without Brake Mounting Flanges If your trailer axle doesn't currently have brake mounting flanges you have a couple of options, one of which is to simply weld on flanges like you mentioned. A brake mounting flange needs to be welded perfectly square and concentric, which typically requires a special jig and a certified fabricator with experience in this type of application. This isn't a DIY project, as it's vital that it's done with precision so you don't have suspension issues on the trailer down the line. Finding...
view full answer... - Recommended Hub And Drum Kit For A 2008 Fleetwood Prowler Travel TrailerWhen it comes to replacing the hub and drums on your 2008 Fleetwood Prowler Travel Trailer first you need to know what the inner and outer bearing numbers are on your existing hub and drum. I will put a link below showing how to find the inner and outer bearing numbers. The Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10 inch Diameter - 5 on 4-1/2 # 84546UC3 has an inner bearing # L68149 and an outer bearing # L44649. The inner bearing # L68149 has an inner diameter...
view full answer... - Spindle Dimensions on the Axle part # T3854F-8974On the Axle part # T3584F-EZ-8974you referenced where the inner bearing will ride the spindle measures 1.378 inches in diameter. Where the outer bearing rides the spindle measures 1.06 inches. The recommended hub for this axle is part # 84546UC3.
view full answer... - Parts Needed to Add Electric Brakes to a Utility Trailer with a 3500 Lbs Axle and Brake FlangesYou will need several items to add electric brakes to your Carry-On Utility trailer. Starting with the trailer you will need a hub and drum that matches the bearings and seal on your trailer spindle and your wheel bolt pattern. The only way to be sure is to check the bearing part numbers and seal part number, but with a 3,500 lbs Dexter axle that has brake mounting flanges you will most likely have the # L44649 Outer and # L68149 inner bearings and # 58846 seal. If these are the correct...
view full answer... - Replacement #84 Spindle for Dexter 3500-lbs AxleAs long as you've got a 3500-lbs EZ Lube axle then you can use the #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter # TRU74FR to replace your spindle; if you don't have EZ lube axles then you'll want to use the #84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter # TRU64FR and Brake Mounting Flange for 1-3/4" Round Trailer Axles - 2K # 4-34. Both of these spindles take # L68149 inner and # L44649 outer bearings. To replace the hubs you'll want to use...
view full answer... - How to Add Electric Drum Brakes to a Top Hat Econo Angle Utility TrailerIn order to install electric drum brakes on your Top Hat Econo Angle Utility Trailer you will need braking assemblies, hub/drums, a breakaway kit, and trailer wiring. For the braking assemblies, I recommend using the Dexter Nev-R-Adjust Electric Trailer Brake Kit part # 23-468-469 because they are self-adjusting which means you don't need to make continual adjustments for even pad wear. For the hubs/drums, I recommend using the Dexter Trailer Hub and Drum Assembly part # 84546UC3 because...
view full answer... - Replacing Dexter 008-249-07 Hubs with Hubs that Have 5 on 4-1/2 Inch Bolt Pattern I have good news! The 008-249-07 number you found indicates that your Tentrax trailer is equipped with Dexter hubs that use the # L68149 inner bearing and the # L44649 outer bearing. With this in mind you can easily replace the existing hubs with a set that features a much more common 5 on 4-1/2 inch bolt pattern. For this I recommend the Dexter Trailer Hub and Drum Assembly # 84546UC3. This is essentially the same hub that you have but with a 5 on 4-1/2 inch bolt pattern. The bearings,...
view full answer... - Can Electric Brakes be Added to Trailer with 3,500 Pound Axle and 10 Inch WheelsYou can indeed install electric brakes on the food trailer you are looking to purchase but you will need to upgrade to larger tires and wheels as well. The additional components you will need will just depend on what the trailer is already equipped with. The reason the existing 10 inch wheels on the trailer won't work is because they won't fit over a 3,500 pound hub-and-drum assembly. This likely isn't an issue with the idler hubs that the trailer is currently equipped with but you will...
view full answer... - Electric Brake Kit And Hub & Drum For Industrial Axle Company 3,500 lb AxleWe do indeed have an electric brake kit for your 3,500 lb Industrial Axle Company axle, and you can choose from either self-adjusting or manual adjusting brakes. Self-Adjust - Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-468-469 Manual Adjust - Electric Trailer Brake Kit # AKEBRK-35 - Mounting Hardware for 10" Brake Assemblies # BRKH10B - Brake Adjustment Spoon for Drum Brakes # W80630 Either will work perfectly for you, with the difference being the self-adjusting Dexter brakes...
view full answer... - Replacement Hub for Utility Trailer with L68149 Inner Bearing and L44649 Outer BearingIt sounds like you have a hub with a # L44649 outer bearing (1.063" inner diameter) and # L68149 inner bearing (1.378" inner diameter), which would match something like the Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 # 84546UC3 or # AKHD-545-35-EZ-K for EZ-Lube spindles. As long as your bearings match this, you'll just need to choose a hub that matches your current wheel bolt pattern. If you need a different bolt pattern, I've linked our entire selection...
view full answer... - Replacement Hub for Bearings 68149 and L44649 on Square AxleBased on the bearing numbers you provided, your axle capacity is 3,500 lbs; there is no set capacity for square axles based on dimensions. We do have a hub and drum assembly from Dexter which will work for you, as it has the bearings you mentioned: - Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles # 84546UC3
view full answer... - Replacement Axle with Electric Brakes for 6x14 Carry-On TrailerYour axle 3K8874 is rated for 3500-lbs. To find a suitable 3500-lb replacement axle that comes equipped with electric brakes, which is definitely the way to go, you'll just want to confirm two dimensions, the hub face spacing and the spring center spacing. Both dimensions are shown in the linked diagram as A and B. If your respective dimensions are 89-inches and 74-inches (which is likely) you can use axle kit # e43SR which includes the axle beam, brakes, hub/drums bearings, races, seals,...
view full answer...
- Replacement Trailer Hub for Dexter 8-247The Dexter hub you have is actually an 8-247 hub like the part # 8-247-50UC3-EZ which would be the correct hub drum. Then for brake assemblies you'd want the part # 23-468-469.
view full answer... - Replacement Hub an Drum Assembly for 2021 K-Z Sportsmen Classic 181BHFor a hub and drum assembly that fits your 3,500 lb axle on your 2021 K-Z Sportsmen Classic 181BH you need the Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 # 84546UC3. If you have E-Z lube axles then you need the # AKHD-545-35-EZ-K instead. Both of these use a # L68149 inner and # L44649 outer bearing. They have a 5 on 4-1/2 bolt pattern and use 10" brake assemblies like the Dexter Nev-R-Adjust Electric Trailer Brake Kit - 10" - Left and Right Hand...
view full answer... - Recommended Electric Brake Assemblies and Hub/Drum Assemblies for Dexter 3500 lb AxleFor your PJ Trailer with Dexter 3500 lb axle, I recommend the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-468-469 as well as the Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles # 84546UC3. This combination will be a great fit for your axle and will work seamlessly together. I've attached a couple videos to further assist. The brake assemblies will only need to be initially adjusted at install and then will never need to be readjusted for proper fit and use. They will...
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Jacob T
Installed by:
Rick A
Installed by:
Kevin C
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Hannah L
Video by:
Thomas T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jeff
12/4/2023
I just took the whole assembly off to regrease and check for wear. Awesome results after a year of heavy and frequent use.