Replacing Dexter 008-249-07 Hubs with Hubs that Have 5 on 4-1/2 Inch Bolt Pattern

Updated 02/25/2019 | Published 02/23/2019

Products Featured in This Question

Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2

(1072)

$137.94

Replacement Trailer Hub Bearing - L44649

(2074)

$14.16

Replacement Trailer Hub Bearing - L68149

(2074)

$14.31

Question:

I have a tentrax trailer manufacture stated its a 1400lb dexter torsion axle part# on torsion bar 69-85 HD 009. With brakes 10.09 diameter part# 008-249-07. I pulled bearings part numbers are worn down so I cant read them Current bolt pattern on drum is 5X5 I want to change to 5X4.5. 1. Is this possible 2. Do i need to provide any more info 3. What parts would I need Thank you

asked by: Ryan L

Helpful Expert Reply:

I have good news!

The 008-249-07 number you found indicates that your Tentrax trailer is equipped with Dexter hubs that use the # L68149 inner bearing and the # L44649 outer bearing. With this in mind you can easily replace the existing hubs with a set that features a much more common 5 on 4-1/2 inch bolt pattern.

For this I recommend the Dexter Trailer Hub and Drum Assembly # 84546UC3. This is essentially the same hub that you have but with a 5 on 4-1/2 inch bolt pattern. The bearings, races, and seal are all included. I have attached a short video review on this hub assembly that you can check out as well.

expert reply by: Chris R