See what our Experts say about this etrailer Trailer Hitch Lock

• How to Get Multiple Keyed Alike Trailer Hitch And Coupler Locks
  We have an option for you, though there isn't a way to get matching keys for a Master Lock # 2848DAT trailer hitch and coupler lock set as they don't have a Keyed Alike option for a second set. What you can do in order to use the same key for multiple trailer hitch locks and coupler locks is use the etrailer locks, and select the "Keyed Alike" option from the drop-down on their product pages. This will get you all the locks keyed the same so you only have to keep track of a single key....
  view full answer...
• Availability of 1-1/4 inch to 2 inch Hitch Adapter that Fits 2014 Nissan Juke
  We have a Class I compatible 1-1/4 inch to 2 inch hitch adapter that fits the hitch you have installed on your 2014 Nissan Juke with the part # HTAD. You should note that using a hitch adapter does cut the capacity of the hitch you install it in by 50 percent.
  view full answer...
• Trailer Hitch for 2013 Nissan Altima Sedan that Does Not Require Drilling to Install
  The Curt # C11352 and Draw-Tite # 24796 require drilling in order to install on a 2013 Altima sedan. If you're needing the hitch as an attachment point for a bike rack or other hitch mounted accessory, I'd recommend the Draw-Tite # 24796. If your owner's manual or Nissan says it's okay to tow with your Altima, you might also need the following: A ball mount Trailer wiring harness, part # 118470 2 inch trailer ball, part # 19258 1-7/8 inch trailer ball, part # 19256 Locking hitch pin,...
  view full answer...
• Parts Needed to Tow a Small Trailer with a 2018 Ford EcoSport
  The Draw-Tite Trailer Hitch Receiver # 36660 will fit your 2018 Ford EcoSport SE no matter what size engine you have so you are good to go on that end of things (plus the EcoSport in the video is an SE). The hitch comes will all of the hardware to get it mounted as well. Please note that even though this trailer hitch has a max trailer weight rating of 3,500 lbs, Ford has determined that the max towing capacity for your EcoSport is 2,000 lbs so that is your limiting factor. For a ball...
  view full answer...
  
• What Size Locking Hitch Pin Fits Different Class Trailer Hitches
  On a Class I or II 1-1/4 inch trailer hitch you will need to use a 1/2 inch hitch lock such as # e98879. This lock has a 2 inch span which is the usable length of the pin. I have included a link to a video review for you. For a Class III or IV 2 inch trailer hitch as well as Class V 2-1/2 inch trailer hitches you will need to use a 5/8 inch diameter pin such as # e98881 which has a span of 3-5/8 inches. I have included a link to a video review of this lock as well.
  view full answer...
• Recommended Hitch Locks That Can Be Keyed Alike
  For the 5/8 inch diameter hitch pin holes I recommend our etrailer.com Trailer Hitch Receiver Lock # e98882. These stainless steel hitch locks feature a patented pick-proof screw-and-lock security and all weather grips for improved handling. Once on the product page, simply select "Keyed Alike" on the drop-down menu and both locks you are needing will use the same key. We do not have any hitch locks available that have a 3/4 inch diameter. If you are needing one for 1-1/4 inch receivers...
  view full answer...
• Trailer Hitch Receiver Compatibility with 2018 Hyundai Elantra Sedan
  The Curt Trailer Hitch Receiver - Class I # C11424 is a confirmed fit for the 2018 Hyundai Elantra non-sport model sedan. Because this is the same hitch without the euro ball mount, the Curt # C114242 you asked about will also fit and comes with the 2 inch ball euro style ball mount. If you also need trailer wiring, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118692. This custom-fit T-One connector plugs into your Hyundai Elantra's wiring harness,...
  view full answer...
• Does Using Hitch Size Adapter Negate Use of Hitch Lock
  Hey Amy, when you use a hitch adapter part # HTAD you have to use an additional hitch lock. So on the 1-1/4 inch size you'd want the part # e98879 and then on the 2 inch size you could use # e98882.
  view full answer...
• Will 1-1/4 Inch Ball Mount With 5-1/2 Inch Rise Work if 5 Inches of Rise is Needed
  That's a good question, and you did indeed measure correctly, from flat ground to the top of your hitch receiver. Since that measurement is 10 inches and your trailer coupler is 15 inches, 5 inches is the correct rise, but an extra half-inch is absolutely acceptable, so you can use the Brophy ball mount: - Brophy Drawbar for 1-1/4" Hitches - 5-1/2" Rise, 6" Drop # BM96 As long as you're within about an inch or so of being level you won't have any issues at all when towing. So the # BM96...
  view full answer...
• Recommended Keyed Alike Trailer Hitch Receiver Locks
  It definitely is David. We have three different options that will work with 1-1/4", 2", and 2-1/2" hitches that can all be keyed alike. I have listed them below: 1-1/4" - etrailer Trailer Hitch Receiver Lock for 1-1/4" Hitches item # e98879 2" - etrailer Trailer Hitch Receiver Lock for 2" Hitches item # e98880 2-1/2" - etrailer Hitch Receiver Lock for 2" and 2-1/2" Hitches item # e98881 You can buy any combination of these locks and get them keyed alike but you have to select keyed...
  view full answer...
• What Anti-Rattle and Locking Pin do You have for My Receiver that is 1 1/4"?
  Hello Neal, For your set-up I recommend the Roadmaster Quiet Hitch for 1-1/4" Trailer Hitches # RM-061-125, and the etrailer Trailer Hitch Receiver Lock for 1-1/4" Hitches - Flush - 2-1/8" Span - Chrome # e98879. We do not have a locking hitch pin that is also an anti-rattle for the 1 1/4" receiver, that is why I am suggesting the 2 different parts. What are you hauling that you need an extender? *Remember by using the extender it will cut your tongue weight in half.
  view full answer...
• Can Tow Ready Trailer Hitch Receiver Lock Be Keyed Alike
  Hi Carl; the Trailer Hitch Receiver Lock # 5201 does not have a keyed alike option so you won't be able to match the key on the # 5200 you got from us. The only option if you want to use both of these is to have two sets of keys for the locks. If you really want keyed alike locks you could always return the Tow Ready lock and get the etrailer Trailer Hitch Receiver Lock for 1-1/4" Hitches # e98879 and etrailer Hitch Receiver Lock for 2" and 2-1/2" Hitches # e98881. Make sure you select...
  view full answer...
• Recommended Keyed Alike 1-1/4" Hitch Locking Pin
  Not the Buyers Products item # 337BLHP125 but I have one capable of being keyed alike to any quantity you want to purchase. It is the etrailer Trailer Hitch Receiver Lock for 1-1/4" Hitches item # e98879. This is our only receiver rock for 1-1/4" hitches that has the ability to be keyed alike. When you select the quantity of locks you want on the right hand side of the item # e98879 product page, you'll want to go to the drop down above and change it to keyed alike from keyed unique....
  view full answer...
• Recommended Locking Pin for a Thule Trailway 2 Bike Rack
  I sympathize with your situation but the bike carriers use thread-specific hitch pins. They do this intentionally so you have to pay a premium price for their products. Other manufacturer locking hitch pins will not fit the Thule Trailway 2 bike rack. You are going to have to use the Thule Snug Tite Hitch Lock and Anti-Rattle Device item # THSTL2. The only other option which isn't really a good solution is to drill out the threads on the bike rack and use a standard locking pin like the...
  view full answer...
• Brake Light Hitch Cover Solution for 1-1/4 Inch Hitch Receiver
  In order to use a standard light up hitch cover that doesn't have anything special, like the skull eyes, you'll need to use the Brophy Adapter # HTAD. This then allows you to use a light up cover. I also recommend ordering locks for both to help deter prying hands from using your light setup on someone else's vehicle. We have the hitch locks # e98880 and # e98879 which fit 2" and 1-1/4" receivers respectively and can be ordered keyed alike if you choose so. Attached are some review videos...
  view full answer...
• Hitch Installation Instructions for 2012 Impreza Hatchback
  For the 2012 Impreza Hatchback, the correct hitch would be the Curt # C11286. For WRX or WRX STi Hatchback models, the correct hitch would be # C11120. The # 11317 you mention is a fit for the WRX Sedan model only. Of all the hitch manufacturers we deal with, I believe Curt does the best job on their installation instructions. I have linked you to the instructions for both hitches mentioned above. If you click the provided link, you can see a video showing the hitch being installed on...
  view full answer...
  
• Recommended Hitch Pin Lock For A Reese Outfitter Adventure System Bike Rack
  From what I can find the Reese Outfitter Adventure System Bike Rack can take a standard hitch pin lock so you can use the etrailer Hitch Pin Lock # e98879 if you have a 1-1/4" receiver or the etrailer Hitch Pin Lock # e98880 if you have a 2" receiver.
  view full answer...
• Replacement Hitch Pin for Older Yakima ROC 1.25 Bike Rack
  The diameter of the pin on the Trailer Hitch Receiver Lock # e98879 is 1/2 inch. I spoke with my contact at Yakima to learn more about your bike rack. The rack you have is a ROC 1.25. This bike rack is designed to use a threaded hitch bold. For a replacement threaded hitch bole you will want part # Y8890176. This is the hitch pin that is designed and recommend for use with the ROC bike rack.
  view full answer...
  
• Towing Set Up for a 2021 Mazda 3 Hatchback
  Yes, the Curt Trailer Hitch Receiver item # C98BR is a confirmed fit for the hatchback model of the 2021 Mazda 3. This hitch is custom fit and bolts directly to your Mazda with included hardware. It has a maximum gross trailer weight of 2,000 lbs and a maximum tongue weight 200 lbs. This will be suitable for the 800 lbs uhaul trailer and your 417 lbs bike but you will want to check your owner's manual to ensure your Mazda 3 has the capacity to pull that much of a load. For a wiring...
  view full answer...
• Replacement for Trailer Hitch Receiver Lock With Missing Cover
  I can certainly understand just wanting to replace one part of your trailer hitch receiver lock, but those locks do not have replacement parts, so you are going to have to replace the entire lock. The correct one is going to depend on the size of your hitch. - 1-1/4" Trailer Hitch Receiver: etrailer Trailer Hitch Receiver Lock for 1-1/4" Hitches # e98879 - 2" Trailer Hitch Receiver: etrailer Trailer Hitch Receiver Lock - Flush Design for 2" Trailer Hitches # e98880 - 2-1/2" Trailer Hitch...
  view full answer...
• Trailer Hitch Lock to Secure Ball Mount to Trailer Hitch Receiver
  From what I can tell it sounds like you are needing a hitch lock to secure your ball mount to your trailer hitch receiver to replace the pin. We do have that, with the right one just depending on the size of your trailer hitch: - 1-1/4" Hitch Receiver: Trailer Hitch Receiver Lock # e98879 - 2" Hitch Receiver: Trailer Hitch Receiver Lock # 1480DAT - 2-1/2" Hitch Receiver: Trailer Hitch Receiver Lock # 1469DAT - 3" Hitch Receiver: Trailer Hitch Receiver Lock # 34061074-D
  view full answer...
• Trailer Hitch Recommendation For 2016 Toyota Corolla
  I do have a hitch option for the 2016 Toyota Corolla but the Curt Trailer Hitch Receiver - Custom Fit part # C11375 is a fit for the Scion Tc. I recommend the Curt Class I Trailer Hitch Receiver part # C11265 for the 2016 Toyota Corolla because it provides more ground clearance than the other option. When you carry accessories like a bike rack or cargo carrier, they are less likely to drag the ground with more ground clearance. I have attached an installation video for your reference....
  view full answer...
  
• Trailer Side Couplers Compatible With Lock N Roll Articulating Hitch Vehicle Side
  I'll go ahead and give you the list of all the trailer side couplers that are compatible with the Lock N Roll Articulating Hitch w/ 3-Position Channel - 1-1/4" Receivers - Vehicle Side # 336VS503507. - Lock N Roll Articulating Coupler - A-Frame # 336TS504 - Lock N Roll Articulating Coupler - 3" Channel # 336TS508 - Lock N Roll Articulating Coupler - 2-1/2" Channel # 336TS506 - Lock N Roll Articulating Coupler - 2" Channel # 336TS528 So the right coupler is simply going to depend on...
  view full answer...
• Can Hitch Pin for Class III Hitch Be Used in Class I or II Hitch
  You cannot. A Class I or II hitch needs a 1/2 inch diameter hitch pin, while a Class III hitch uses a 5/8 inch diameter pin. For a 1/2 inch hitch pin, use # PC2. A locking version would be part # e98879.
  view full answer...

Do you have a question about this Trailer Hitch Lock?