Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Use this hitch immobilizer to keep your drawbar or hitch-mounted accessory from rattling and shifting in your receiver. Great for bike racks, cargo carriers, and other accessories. Quick, simple bolt-on installation.
Features:
Specs:
Nearly every hitch setup suffers from a bit of slip. This free play between your trailer hitch receiver and your hitch-mounted accessory is completely normal, but it's also completely preventable. By adding the Quiet Hitch to your setup, you can stabilize your hitch-mounted accessory as it sits in the receiver to eliminate rattle, sway, and all that extra play.
Just slip the Quiet Hitch over your drawbar or other accessory. When you slide the accessory into the hitch receiver, position the U-bolt around the collar on the bottom of your hitch receiver. Then place the bar on top of the accessory shank and tighten the nuts onto the U-bolt. As you tighten the Quiet Hitch, the shank of your accessory will be pulled down towards the bottom of the receiver opening, thus securing it in place within the tube.
Average Customer Rating: 4.7 out of 5 stars (178 Customer Reviews)
Use this hitch immobilizer to keep your drawbar or hitch-mounted accessory from rattling and shifting in your receiver. Great for bike racks, cargo carriers, and other accessories. Quick, simple bolt-on installation.After buying a piece of junk from HF that did not work and returning it. I looked on etrailer. Same place I bought my hitch. I just put it on and it fits perfect does the job. I got the 1.25 hitch and it’s so simple and and it took less that 1 minute to put on. NO RATTLE thank you for a good product.
The anti-rattle Quiet Hitch device worked great to eliminate the loud jerking and clunking of the ball mount in the receiver when slowing and stopping. No more annoying jolting and banging!
Just a bit of background, I have driven the Alaska highway from the East coast to Alaska (as far as Deadhorse) 9 times, so we are well familiar with the road conditions we will meet.
Anti-rattle device will be used to help tighten a hitch mounted luggage carrier for a trip from the East coast to Kodiak, Alaska. Since the carrier was constructed for a 2” square hitch connection, we needed to purchase a 1.25” to 2” converter and secure it to eliminate accumulated looseness. The 2” square end was welded to the carrier and the 1.25” stinger was tightened by welding beads on the stinger and then grinding them to allow a tighter fit. Although these actions tightened the carrier from about 3” play to about ¾” play I needed the anti-rattle fitting to eliminate this last ¾” looseness.
The Roadmaster fitting took out the last ¾” rattle and looseness but it was not without some issues. The U-bolt part of the fitting is about ¾” to 1” wider than the hitch. This means that when the nuts on the Roadmaster fitting are tightened, the U-bolt stretches and deforms. How this deformation will react to the frost heaves and rough roads we will see on the Alaska Highway north of Whitehorse is yet to be seen. It appears the U-bolt is of grade 3 hardness steel and with the over wide size, it may have a tendency to deform or even break under load. We have been very careful to stay within the load limits specified for the hitch on the vehicle and for the carrier. But as those who have traveled Northern roads know, the road surface and frost heaves can sometimes catch you at a higher speed you should be traveling.
My recommendation to Roadmaster would be to narrow the spread of the U-bolt to better match the standard size of the hitch. A second, more important point, would be to make the U-bolt of grade 8 material to better take unexpected loads. We will be checking tightness numerous times on the trip to be sure no unexpected looseness happens.
With the exceptions noted above, the device is well built and should be more than adequate for day to day functions and needs. I'd recommend it without reservations for standard use. Although the price charged for it was on the high side, the exceptionally low shipping cost by ETrailer and their shipping speed and package following were EXCEPTIONAL.
Easy to install on my Kuat bike rack & Curt hitch combination, on an older Subaru Outback. Because of the hitch position beneath the rear bumper, I installed this item "upside down" (with the nuts closer to the ground) so that I could use a deep socket (1/2 inch) to tighten the nuts. This item eliminated the wobble, at least when I tested for wobbling while the car was parked.
The combination of a Swagman XCT2 bike rack and a curt 1 1/4” receiver produced a bit of a side to side wobble when under way. The Roadmaster Quiet Hitch alleviated this problem. Sturdy product. I torqued the nuts as specified and have had no issues after a dozen trips. I check them as part of my pre-trip routine. Vehicle is garaged so I can’t comment on how it holds up to the weather. A nice solution to the wobble problem.
David
12/1/2020
Nothing has changed after a year to make me alter my review. Solid product.
I used this with my bike rack hitch attachment and it eliminated all the play between the two pieces. Now it feels like one solid piece with the hitch. Great product!
Ouiethitch was easy to put on and worked very well a very good product
Love it! I am not sure how you would use it, but I turned it upside down to stabilize a bike rack. Can't do that with a heavier load, but this way it helps elevate the rack so I don't scrape when backing out of the driveway. Still, I wish this product didn't rust. Only had it a year!
This part installed in less than 5 minutes and it does exactly what it says. I'm using this on a 1 1/4" hitch with a bike rack attached. It's very stable now and no noise/rattling.
Excellent quality. It has kept my hitch steady all year.
Won't stay tight. Skinny u-bolt keeps b ending.
The Roadmaster Quiet Hitch is a great attachment for any one using a hitch. Most hitches have a certain amount of play in hem and his will stop the hitch from rattling while your towing anything.
I have used this only once. I do which the U bolt and nuts where of a higher grade of steel. I will just have to see how it wears. But I would recommend this if you have a noisy little trailer like we have.
This morning my TWO Roadmaster Quiet Hitched (2" and 1-1/4") arrived. I set about mounting my bicycle rack into my new etrailer.com 2" Draw-Tite hitch on my 2014 Subaru Outback.
I mounted the Roadmaster Quiet Hitches and was very pleased the bike rack went from having over 5" of free-play at the rack head to less than 1/2" of free-play. I no longer need to have a strap from the rack head to the roof rack.
I very good investment.
(it is a long story why I have both 2" and 1-1/4" hitches)
John T.
4/5/2018
The products have worked out VERY well ... I am much pleased. It was a very good investment. I found I needed to invert the 2 stabilizer because of clearance issues with the rear plastic valance but I see no problems.
Great service, thanks
Just what I needed. Because I use a 2" to 1 1/4" inch adapter for my bike rack the other anti-rattle devices I tried would not fit. The compact design of the Roadmaster Quiet Hitch works perfeclty and etrailer delivered it very promptly. I am very satisfied.
Doug
4/24/2016
After one year it still works great, simple and effective
First of all, the quick service and shipping were unbeatable-- I got my order the next day with regular shipping.
The Roadmaster Quiet Hitch is as advertised and exactly what I needed-- I've never seen one in a retail store.
Review the Erickson Re-Tractable Ratchet Straps w/ Push Button Releases - 2" x 6' - 1,333 lbs - Qty 2 - 34414
These straps are great-- with no extra flapping straps to tie up.
Tom A.
9/28/2016
Just fine and Im about to buy another when my new vehicle is delivered.
Just perfect
I have used this a couple of times and it works great. Fits my class 1 hitch well.
Had a lot of rattling and clunking from the hitch. Rattling with nothing in tow and
clunking when towing( starting & stopping ). This item has made everything nice
and tight.... as usual the service from ETRAILER was terrific. Easy to order and it
arrived quickly. Don't know why anyone would go anywhere else for their trailer-
ing needs.
Al F.
3/1/2018
still doing what it is designed for
The Roadmaster clamp is perfect for a 1-1/4" setup. We're using it to stabilized a multibike rack with a Curt hitch.
Martin H.
8/22/2017
Its still working great. Used multiple times with bike rack.
I use this Roadmaster Quiet Hitch U-collar to stabilize the 1.25"-2" hitch adapter which I plug into the 1.25" hitch on my car. The adapter allows me to attach my 2" Kuat bike rack to the car. The Quiet Hitch does a great job of reducing sway. The only thing I don't like about the Quiet Hitch is that you are supposed to use a torque wrench to tighten it, yet another tool to carry along and lose. Even when I snug up the Quiet Hitch flange and lock nuts well with a 1/2" socket, they do tend to loosen after a few miles. Assuming that my Quiet Hitch loosens because I don't use a torque wrench, it would be nice if the Quiet Hitch were made with an airplane-grade retention system that doesn't require torquing to a specific value.
I bought this because I was a towing rookie. The first time I towed my trailer the noise from the hitch was really loud inside the car. My wife thought the trailer was going to come off.
After researching my problem I came across this product. After installing the noise disappeared. No more banging sounds! I recommend this for a smoother towing experience.
It is hard to believe how well this product works when just looking at its simplicity. The old lash and loud noise from the ball mount being loose in the receiver is all gone.
Eric N.
7/23/2017
A year later, a new car, a new hitch receiver. But the same lash between the ball mount and hitch receiver. This product works as perfectly on the new Chevy as it did on the old Subaru. No noise. Well done.
Had a hard time finding a hitch stabilizer that would work for my situation. In my case, I am not towing anything but, rather, mounting a bike rack. Also, complicating matters was a converter from 1-1/4" to 2". The rack mounted on the 2" receiver and comes with a screw down bolt to prevent play. Unfortunately, the converter had no such feature and had significant play when inserted into the 1-1/4" receiver of the two hitch. The Roadmaster product completely solved the issue. Very happy with the results.
Do you have a question about this Hitch Anti-Rattle?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brad
8/6/2024
Works great I put it on tightened it up. Rechecked 2 days later still tight. I’ve never taken it off since. I use the hitch at least three times a week. I also purchased a 1.25 to 2 inch adapter receiver and ball. No difference in using it on the 1.25 or the 2 inch. Great product. When I sell the car they won’t get the quiet hitch. I’m keeping that.