bing tracking image
Q & A Icon

Can etrailer Cargo Carrier for 2" Hitches be Used in 1-1/4" Class 1 Hitch  

Updated 02/17/2026 | Published 06/10/2024

Question:

Hi - I have a Hyundai Tucson plug with the OEM hitch which is 1 1/4 and most likely class 1 no doc. on it. Im interested in a flat hitch cargo carrier, especially one with a tilt and folding ability. I like your 24x60 etrailer Cargo Carrier Item e98874 but it is only for 2. If I buy a 1 1/4 to 2 hitch adapter can I use that? And do you sell adapters? Thank you!

0

Expert Reply:

Hi Chris,

Yes, technically you can use the etrailer Cargo Carrier for 2" Hitches # e98874 in a 1-1/4" Class 1 hitch with the Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver # HTAD and Hitch Lock # e98879.

That said, using an adapter like this will reduce the capacity of your hitch by 50 percent. Most Class 1 hitches have a tongue weight capacity of 200 lbs, so an adapter will cut that to 100 lbs. Since the carrier weighs 48 lbs, that leaves just 52 lbs of carrying capacity.

That's quite a drop, so I would instead consider using a cargo carrier that's rated for use with a Class 1 hitch, either the Curt Cargo Carrier # C18110 or # C18145.

While neither of these are as large, they weigh 30 lbs, so assuming your hitch has the 200 lb tongue weight capacity, you're still left with 170 lb of cargo carrying capacity.

expert reply by:
0
Kyle S
Robin H. profile picture
Etrailer Expert

Robin H.

2/17/2026

Hey Chris, how did things work out with the Curt cargo carrier options for your Tucson’s Class 1 hitch? Your update could make it easier for the next person trying to choose between using an adapter or a smaller carrier.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>