Arrives before Christmas 
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Smart and effective way to eliminate rattle while carrying bikes or general towing. Easy to use design gets right to the heart of the problem--too much space between shank and receiver! This device works by keeping shank and receiver tight together.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello neighbors. It's Brad here at etrailer. And today we're taking a look at the Curt anti-rattle kit for a hollow shank. Now we have a two inch hitch with a five eight hitch pin. We also have other varieties, including the two inch receiver with a half inch hitch pin. And it's also available for an inch and a quarter receiver as well.
This kit is going to reduce your rattling and shaking around in your hitch when you have your accessories attached. Now I can tell you about the product, but the best way to see what it does is to see it in action. So out on our test course, we have a standard hitch pin clip, and you're gonna see as we go over bumps and do a base of maneuvering that all contents on the cargo carrier are moving side to side, and that's not going to be good for your contents on the cargo carrier. And also as the driver, you can hear it rattling back and forth. So any of your accessories that may be moving around, whether it be your bikes or ball mounts, it's gonna cause an audible noise inside, and the contents that you're towing or carrying are also gonna be rattled.
With our cargo loaded up, we're gonna hit the test course through the same courses that we did and really see the difference before and after putting our anti-rattle device on. With our anti-rattle hitch kit installed, you're gonna see the lack of movement or the reduction in the side to side action, as well as movement of the contents on the carrier itself. So this is gonna reduce all that wobbling and shaking up of the things that you're carrying on any accessory. That's gonna give you peace of mind, knowing that your accessories loaded up, whether it be your expensive bikes or your luggage, are not getting rattled to bits, and moving side to side. The construction of the anti-rattle kit is a durable yellow zinc plated finish, so that's going to hold up to the environment, whether it be from salt door of road grime, it's gonna hold up long-term and reduce the potential for corrosion or rust buildup.
Now keep in mind, this is only to be used with hollow shanks. So some of your accessories that are solid will not work with this kit. Fortunately, many accessories with a solid shank are gonna have a anti-rattle hitch pin already included with them. One of the things I really like about this kit is the pin that's included can go on it at any angle, thanks to the groove design on the pin itself. So you can be at any angle and know that it can be attached nice and easy.
Some threaded hitch pins will have a hole instead of this design, which seems okay until you try to put your pin in and the angle puts it to where it's hard to slide in. So the ability to put this in at any angle is really awesome. My opinion on the anti-rattle hitch kit is it's a great investment for someone that has any accessories loaded up for a long period of time, whether it be for a long trip or keeping it on there on a daily occurrence, every time you drive your car and you hear that clang, clang, bang, bang, as you hit bumps, it can be annoying and something as simple as this with a quick install, can completely eliminate that. So installation of this is gonna be pretty simple. We're gonna slide this in and I'm gonna just slightly thread this tapered end, and this tapered end is going to allow that to kind of fit in there. And I'm gonna just hold that in place. Now we're using this on a cargo carrier today. This can be used on any hollow shank accessories to really give that nice tight bite to it, whether it be a bike rack, cargo carrier, or any other accessories you may have. So now we're gonna feed this in to the receiver tube opening. I'm gonna remove this so I know it's in place. And then slowly slide this in. Once I get my hitch pin holes lined up, I can start threading this in. So as you can see before I tighten it down, this is kind of the wobbling we're working with. You can see the actual shank in the receiver tube moving and cars barely moving but the shank is doing plenty of wobbling. So let's tighten that down and see what it looks like after. Now, before I crank it all the way down, I'm gonna take my included spacer and slide that in. And that's gonna fill that void there to give it added strength and security over here and that way, not all the stresses on the threads. So with that spacer in place, we can go ahead and tighten it down. Once we have a tight, you should already notice that the accessory is not moving as much, and then finally put your hitch pin clip on and you're good to go. So now with our adapter in place, you can see really there's a little bit of flex, but a lot of that's in the cargo carrier. So as I moved this, the shank and the receiver tube is staying completely still and the whole car is moving with it. There's no play and there's no slop, it's ironed all that out. And that's gonna do it for a look at the Curt anti-rattle kit for hollow shanks. Thanks for watching..
Average Customer Rating: 4.4 out of 5 stars (63 Customer Reviews)
Smart and effective way to eliminate rattle while carrying bikes or general towing. Easy to use design gets right to the heart of the problem--too much space between shank and receiver! This device works by keeping shank and receiver tight together.I have a Curt 2 Bike Platform Rack C180850 and the threads in the shank for the hitch pin have failed. I purchased this as a solution. It seems to work, but the part with the welded nut is too short to fit in the shank as shown in the product videos (see pics). So it takes a bit of jiggling to emplace the welded nut and insert the shank into the receiver, then align the nut with the pin hole Overall it is an effective and inexpensive, but imperfect solution If I could give it 3-1/2 stars, I would.
Great anti-rattle kit. Great Plus. Super easy to order.
Easy to install, works as advertised with no rattle!
It worked well. It was kind of a pain to install but I got it figured out. It did take the play out of the hitch nicely though.
Works well. Does it's job
Excellent product. Shipment was super.
This device does not stop the bike rack from rattling. It does not even reduce the play a little. The 75 cent bolt I had through the hole did a better job.
It was a complete waste of money, and no one at etrailer replied to my email where explained that it does not work.
Slick little device. Bought this for my daughter's hitch mounted bike rack. Epoxied the "nut" inside the rack tube so she didn't have to fuss with aligning it each time. Really worked great to eliminate the bounce and rattle of her bike carrier.
Dose not work with solid 1 1/4 shanks, which MOST are at the 1 1/4 size.
I'm surprised etrailer did not warn me I had picked incompatible items.
Though these guys were pros. but not so much. last time shopping here.
Sierra K.
12/1/2021
I apologize that our automatic system did not catch the error. Here is an anti-rattle device that will work with your solid shank accessory: item # RM-061-125.
This product did not work for me. The hardware obscured the hole that the trailer locking mechanism goes through. The trailer still rattles.
Rachael H.
4/12/2019
If you are looking for another device to secure your ball mount or accessory in the your trailer hitch I recommend the Roadmaster Quiet Hitch # RM-061-125. It will immobilize your hitch accessory from the outside, and would not be an obstruction.
Helpful Links
I got this to use on my Allen bike rack for my Curt hitch. Like another reviewer mentioned, my rack had a good six inches or so in back-and-forth sway. Once this kit was installed, the rack is pretty rock solid.
Installing it the first time took some trial and error. Like another review mentioned, I may try the expanding foam method to keep the bracket in place for quicker install.
Other than that, this was a great product and well worth the money.
Bought this to replace the anti-rattle device that is included with the Boone trailer hitch table. The eye bolt on the Boone device eventually broke. The new item (F-315) is very similar to the device used in my bike rack. It works great! Easy to install and does the job.
Great product. Have used for one year on my bike rack and there is no rattle or wobble. Excellent product and it’s a must for any bike rack/trailer hitch system.
Installation can be a bit challenging. It requires lining up the clamp inside the tube, and inserting the bolt/pin. There is a tongue that fits in the smaller (front) hole to aid alignment on the Allen Sports bike rack, and maybe others. Since it is inside the tube, though, there is no way to reliably hold it in place during installation. A delicate touch is required.
Once installed this works great for swaying along two axes (roll, yaw). Pitch (up/down) movement isn't as limited, especially with a load on a bike rack, but it is dampened. Drove about 200 miles at highway speeds with no issues.
Overall I am pleased with the improvement. Inserting a shim may eliminate the pitching altogether.
I purchased this hoping it would stop the wobble of my Allen bike rack in my Curt Hitch. It was not even long enough for the threads to go to the other side to tighten it down. It was recommended from a review of the same rack/hitch combo - not sure what could possible be wrong.
The nut part of this device is not as solid as you would want for a lifetime investment. I only mention this because after you use it, you will NEVER want to tow without it. It takes the rattle and clunk out of your tow and it takes 10 seconds extra to install this device when you install your tow bar. I used this while towing a motorcycle trailer. I used a flat washer in place of the supplied lock washer without any problems. I love this solution.
Does not fit hollow reese hitches - the ball mount I have has an angled end tube which makes the lip not functional w/o modification. The little lip that keeps it from falling down the tube, had to be clipped off to make it fit. Once attached it seems to function as desired in decreasing ball mount to hitch tube movement. This is being used with a 2-1/2 drop reese ball mount pulling a noisy trailer. Will update inform whether or not it functions. I have not installed it on the vehicle just yet.
Excelent Service, the item have excelent quality and great support from Etrailer Team.
My co-workers Tom and Charlie discovered this item on-line and recommended I try it. It worked like a charm! Before adding this part, my bike rack would be wobbling and rocking back and forth both with the bikes loaded and when empty. Once we installed this, the rack fit and stayed snug in the receiver with no more rattle!
Have been looking for these locally but can't be had - Etrailer had them however! Great item to keep hitch accessories from waggling side to side.
This product will do what it says it will do.
However it is impossible to install without metal working skills. It will not stay in place after insertion long enough for you to get the bolt started (Witness your how to video!)I had to weld mine in place and then cut off the remainder with a grinder as the locating tab location is dependent on the shank OEM. Some type of mouse trap type spring is required to hold in place for this to be practical of a DIY type individual.
Simple yet effective in my 2015 Subaru Forester and CCM bike rack.
Worked exactly as advertized. The Allen Sport bike rack had 6 inches of play side to side at the top of the rack. With the F-315 anti rattle bolt there is less than 1/2 inch.
The product works fine. It is a little difficult getting in the right place since it is not fixed to anything. However, I solved this by placing it into my bike carrier then using expanding foam to keep it in place.
A little tricky to get it right the first couple of times, but after that it's a breeze. Perfect solution to the annoying rattle with my bike rack!
Do you have a question about this Hitch Anti-Rattle?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
10/20/2022
I am very sorry that we did not respond to you as we strive to answer every email that we receive. I will have customer service reach out to you. I recommend using a u bolt style anti rattle device part # RM-061-125 instead.