See what our Experts say about this etrailer Trailer Bearings Races Seals Caps

• Timbren Axle-Less Suspension System Compatibility with Aluminum I-Beam Trailer Frame
  The Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Lift Spindle - Off-Road Tires - 3,500 lbs # ASR35HDS02 is compatible with I-beam frames and in tandem axle configuration. Due to the Aluminum frame, I recommend putting a thin rubber pad between the steel mount and the aluminum I-beam. The powder coat on the steel should keep the two dissimilar metals from galvanic corrosion, but a thin rubber pad would drastically increase this safety. Zinc plated hardware will work well with...
  view full answer...
  
• Bearings and Races for 7,000 Pound Trailer Axle
  The most common bearings and seals for a 7,000 pound axle are # 25580 inner bearing, # 14125A outer bearing, # 25520 inner race and # 14276 outer race. The grease seal can vary, and will usually either be the # GS-2250DL, which has a 2.250 inch inner diameter and 3.376 outer diameter, or # GS2125DL with a 2.125 inch inner diameter and 3.376 inch outer diameter. We do also offer complete bearing kits for this axle. For the GS-2250DL grease seal, you can use the Kit # BK3-200. For the #...
  view full answer...
  
• Need Wheel Bearing Kit For Dexter 7,000 lb Axle
  Hey Ethan, thanks for reaching out. The correct bearing and seal kit for your Dexter 7,000 lb axles is going to be either the Bearing Kit part # BK3-210 which has a 2.125" seal or the Bearing Kit part # BK3-200 which has a 2.250" seal. This axle could have come with either size, so I suggest you pull a hub and measure the spindle where the seal rides, or just pull a seal and measure it to confirm. The other option is to just get one bearing kit and order the other seal; 2.250" part #...
  view full answer...
• Replacement Trailer Brake Assemblies for AxleTek B12EA-22
  Hey Josh, the replacement for your existing B12EA-22 brake would be # AKEBRK-7R-SA for the right side and # AKEBRK-7L-SA for the left. There are two sizes of grease seals that fit 7k axles and there isn't a rhyme or reason as to which you may have/need. So if the spindle diameter if 2.2250 inch where the seal rides the correct seal you would need is the part # GS-2250DL or if it's 2.125 inch you'd instead need the part # GS-2125DL.
  view full answer...
• Which Bearing And Seal Kit Is Needed For 2022 Cougar 368MBI Travel Trailer With Dexter 6K Axles?
  Hey there Mark! That's a great idea to stock up on some spare parts. Most people don't have the foresight like that. You will need either Bearing Kit, 15123/25580 Bearings, GS-2125DL Seal # BK3-110 or Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal # BK3-100 depending on if you have the 2.125" or 2.250" inner diameter seal. You likely have the 2.250" I.D. seal but you'd need to check the part number or measure the seal to verify, unfortunately. The only difference in the kits is the grease...
  view full answer...
• Looking For Replacement Brakes, Hubs, And Leaf Springs For My Dexter Axles
  Hey Steve, Thank you for that information you provided, it sets me up to get you the direct replacements. For that replacement brake assembly you will want to go with the Dexter Nev-R-Adjust Brakes # 23-458-459. This is the left and right hand assemblies that came originally on the trailer, ready to slide on and bolt on for you. We have the hub and drum assemblies as well that are pre greased with the bearings, races and seals already in them ready to slide on. For that you want to...
  view full answer...
• Replacement Bearing Kit for 5,800 lb Lippert Axle
  What is the axle capacity that you have? We don't have an easy way to look up what you have with the info you listed but if you get me the axle info I can see what you may need.
  view full answer...
• Looking For Replacement Bearings And Hub Kit For 2017 Airstream Flying Cloud
  Hey David, thanks for reaching out. That is a slick camper. Your 2017 Airstream flying cloud uses a #11 Dexter axle. It uses a # 25580 (1.75" inner diameter) inner bearing and # M67048 (1.25" inner diameter) outer bearing. We can provide bearings and a hub kit for this. Here are the exact part numbers: - Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 12" - 6 on 5-1/2 # 8-201-5UC3-EZ - Replacement Trailer Hub Bearing - 25580 # 25580 - Replacement Race for 25580 Bearing...
  view full answer...
• Replacement Grease Seal for Dexter 7,000 lbs Axles
  Not without looking at your axle tag or the part number off of one of the seals Steven. Unfortunately, the Dexter 7,000 lbs axles have two different options for replacement grease seals. One measures 2.250" item # GS-2250DL and the other 2.125" item # GS-2125DL. Do you have a picture one of the axle tags, or even a part number off of one of the disc brake rotors? If you have a picture you can send it directly to the email address you receive this response from. If you have a part number...
  view full answer...
• How Much Pressure is Required to Install a Trailer Grease Seal
  For starters, the grease seal installs on the trailer hub, not the spindle. It should be a rather tight fit and usually requires a hammer and block of wood to install. In order to make sure you have the correct one, you will need to measure the outer diameter of the spindle and then the inner diameter of the trailer hub where the grease seal sits. These measurements will need to be taken with a digital caliper to the nearest thousand of an inch. If you can let me know what the above two...
  view full answer...
  
• Replacement Grease Seal for 2024 Grand Design Influence 2903RL
  Hey Justin! 7k axles like yours can have two different grease seals. You either need # GS-2125DL (2.125" inner diameter) or # 10-36 (2.25" inner diameter). We don't have a way of knowing which one is on any given axle, but if you can send me the serial number off the axle tag, or a picture of the axle tag, Dexter will be able to identify it. You can also measure the existing grease seal, or the spindle where the grease seal rides if you already pulled the hubs.
  view full answer...
• Replacement Hubs With 5 on 5 Bolt Pattern
  We do have hubs available with a 5 on 5 bolt pattern; they are each compatible with 3,500 lb axles, have inner bearing # L68149 and outer bearing # L44649 and fit wheels that are between 13 inches and 15 inches. You need to take apart your old hub in order to find out if you have the same bearing numbers. If so hub and drum assembly # AKHD-550-35-K will work; for an idler hub assembly # AKIHUB-550-35-K would be the right choice. I've added a link to video reviews of these parts for you...
  view full answer...
• Which Bearing Kit and Grease Seal Fits a Dexter 6,000-lb E-Z Lube Axle?
  Hey Jarrod! For your Dexter 6K E-Z Lube axle, you'll want one of these two bearing kits, depending on which grease seal your setup uses: # BK3-100 – Includes inner bearing 25580, outer bearing 15123, races, and a grease seal with a 2.250" inner diameter. # BK3-110 – Includes the same bearings and races but has a grease seal with a 2.125" inner diameter. You can check the numbers stamped on your existing grease seal or use a digital caliper to measure the diameter of the spindle where...
  view full answer...
• What Bearings and Seals do I Need for my 8 on 6-1/2 Hub on 6k Axles
  Hey, Matthew! I just want to make sure I’m understanding you correctly, when you mention needing two different size outer bearings, can you tell me a bit more about what you mean? For a 6,000 lb hub with that bolt pattern, you’ll typically need: Inner bearing: # 25580 Outer bearing: # 15123 If you’re replacing the bearings, it’s a good idea to replace the seal as well, since they often get damaged when removing the hub. Your setup most likely uses seal # GS-2125DL. Let me know if you...
  view full answer...
• Looking For Bearing Kit For 2017 EZ Loader Trailer With 5,200 lb Axles
  Hello John, thanks for reaching out.The model number of your EZ Loader Trailer does indicate a 5,200 lb axle rating. The 5,200 lb axles do use a standard bearing combination, the # 25580 (1.75" inner diameter) inner bearing and the # LM67048 (1.25" inner diameter) outer bearing. That said, there are two common seal sizes that can go with this bearing combination, and regrettably, there is no way for me to look up your trailer to know the seal size. The trailer manufacturer may be able...
  view full answer...
• Economical Option for Trailer Wheel With 5 on 5-1/2 Bolt Pattern and Trailer Tires
  It sounds like you are just looking for the most economical way to add trailer tires and wheels with a 5 on 5-1/2" bolt pattern but are concerned they won't fit when you replace your axle. Realistically this is a valid concern and your axle may in fact not have spindles that accept a hub with the same 5 on 5-1/2" bolt pattern so you may need to get new wheels and tires when you decide to do that. For now, the most economical option for you to wheels and tires is first with the Modular...
  view full answer...
  
• Looking for Replacement Seals and Races for Hub of 2025 Brinkley Z2900
  Hey Cory, the Curt 7k axle you have would use the grease seal # GS-2125DL. Did you damage your seal or are you wanting to have a spare on hand? The races you would need are part # 25520 and # 14276.
  view full answer...
• Looking For Replacement For T-23934 Seal
  Hello Al, thanks for reaching out. We may have a seal option for you, but I was unable to find any references for the seal number T-23934 you provided. There are no references in our database and even the google does not have anything. In this case the best way to find the correct replacement will be to measure. Use a caliper and measure the OD of the seal, then measure the part of the spindle where the seal rides. This will tell use the necessary ID and OD for your seal and if you can...
  view full answer...
• Do I Have to Use Timken Races with Timken Bearings, or can I Use Mine that were Made in China?
  Hello Dennis, You can use your current Chinese races, and just get the bearings from the Timken Bearing Kit, 14125A/25580 Bearings, 14276/25520 Races, GS-2125DL Seal # TMK32VR. You will want: - Inner bearing: Timken Replacement Trailer Wheel Bearing - 25580 # TMK44FR - Outer bearing: Timken Replacement Trailer Wheel Bearing - 14125A # TMK54FR Also, don't forget some grease seals if you do not already have some on hand. - Timken: Timken Grease and Oil Seal - Double Lip - I.D. 2.125"...
  view full answer...
• Bearings and Seal for Replacing UFP Dexter 41062 Hub with Kodiak Hub and Rotor
  I spoke with my contact at UFP Dexter and he said that your 41062 hub uses inner bearing 031-030-02, outer bearing 031-032-02, and seal 010-181-00. This is the equivalent of inner bearing # 25580, outer bearing # LM67048, and grease seal # GS-2125DL which can all be found in the bearing kit # BK3-310 along with the races for the bearings. Unfortunately the bearing kit # DBRKHW85G that you purchased isn't the same as the grease seal has a slightly larger diameter but that can easily be fixed....
  view full answer...
• Availability of 8 on 6-1/2 Hub and Drum Assemblies for the Timbren Axle-Less Suspension ASR35HDS02
  We do have some hub and drum assemblies that you can use with the Timbren Heavy-Duty Axle-Less Trailer Suspension # ASR35HDS02 which have an 8 on 6-1/2" bolt pattern. Our Trailer Hub and Drum Assembly # AKHD-865-7-2-EZ-K has a 12" diameter and comes with the needed bearings and grease cap for your application. It does come with a grease seal, but you will need to use part # GS-2125DL (Qty 1) or part # RG06-090 (Qty 2) for the correct seal for the smaller spindle. If you don't already...
  view full answer...
• Looking for Replacement Bearings for Grand Design Solitude 310GK with 7k Axles
  Hey Mike, the correct bearings for your 7k axles would be # 25580 and # 14125A as well as the grease seal part # GS-2125DL. Are you wanting to have backups on hand or did you have a bearing failure?
  view full answer...
• Replacement Grease Seal for a Curt or Lippert V000845621 Axle
  Hey James, thanks for the information. For a compatible grease seal you'll need the Grease Seal item # GS-2125DL. This grease seal has a 2.125" I.D. and 3.376" O.D.. It is sold individually. What color are your brake drums? I found the seal size on Grand Design's website and was curious if you have the new ABS braking system. You can add this information and any other questions you have where it says Reply to Jerred H and I'll be happy to answer them.
  view full answer...
• Replacement Grease Seal for a 5,200 lbs Dexter Axle
  Hey Carlos, thanks for the information and your patience. I reached out to Dexter with your information last week and still haven't heard back. There's two options to replace the grease seal on your Dexter 5,200 lbs axles. 2.125" ID - Grease Seal - Double Lip item # GS-2125DL 2.250" ID - Grease Seal - Double Lip item # GS-2250DL The most accurate way to determine the correct grease seal you need is to pull one of your hubs and check to see if there's a part number stamped into the side....
  view full answer...

Do you have a question about this Trailer Bearings Races Seals Cap?