Do I Have to Use Timken Races with Timken Bearings, or can I Use Mine that were Made in China?
Updated 09/12/2025 | Published 05/30/2025
Products Featured in This Question
Question:
Im about to do a brake job and bearing replacement , my Axles 7K have Chinese bearings and races , Im replacing the bearings with Timken ones , my question is do I need to change out the races or will the Chinese one be ok ?
asked by: Dennis P
Helpful Expert Reply:
Hello Dennis,
You can use your current Chinese races, and just get the bearings from the Timken Bearing Kit, 14125A/25580 Bearings, 14276/25520 Races, GS-2125DL Seal # TMK32VR.
You will want:
- Inner bearing: Timken Replacement Trailer Wheel Bearing - 25580 # TMK44FR
- Outer bearing: Timken Replacement Trailer Wheel Bearing - 14125A # TMK54FR
Also, don't forget some grease seals if you do not already have some on hand.
- Timken: Timken Grease and Oil Seal - Double Lip - I.D. 2.125" / O.D. 3.376" - 440972 # TMK38ZR
- Chinese seal: Grease Seal - Double Lip - 2.125" ID - 3.376" OD - GS-2125DL # GS-2125DL
One last thing, if you don't have some grease on hand either, make sure you grab some LubriMatic Prime Guard High Temperature Wheel Bearing Grease - Red - 16-oz Can # L11380.
What kind of trailer are you working on? Getting things geared up and ready for a trip? If so, where are you headed?
Product Page this Question was Asked From
Timken Bearing Kit, 14125A/25580 Bearings, 14276/25520 Races, GS-2125DL Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Standard Bearings
- Bearing 14125A and 25580
- Race 25520 and 14276
- 7000 lbs Axle
- Timken
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: roadmaster comfort ride
- Search Results: trailer bearings races seals caps
- Search Results: 25580
- Search Results: deutsche hydrapro brake actuator
- Search Results: valcrum
- Search Results: electric~hydraulic brake actuator brake actuator
- Search Results: deemaxx disc brakes
- Shop: Long U-Bolt Kit for Roadmaster Comfort Ride Suspension System - For 3" Diameter Axles
- Shop: DeeMaxx Disc Brake Kit w/ Actuator for Tandem Axle Trailers - 13" Hub/Rotor - 8 on 6-1/2 - 7K
- Shop: DeeMaxx Alpha G1600 Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi
- Video: Review of Lippert Trailer Hubs and Drums - Pre Greased Trailer Idler Hub Assembly - LC94ZP
- Shop: Timken 02420 Replacement Race
- Shop: DeeMaxx Kevlar Brake Pads with Steel Back Plates - 7,000 lbs to 8,000 lbs
- Shop: Timken Bearing Kit, 14125A / 25580 Bearings, 14276/25520 Races, 10-36 Seal
- Shop: Timken 25520 Replacement Race
- Q&A: Comparing Chinese Bearings with Bearings Made in the USA
- Q&A: Voltage at Brake Magnets is 8 Volts with Brake Controller Set to Maximum
- Shop: Brake Controller
- Q&A: Low Brake Output Voltage With Factory Brake Controller On a 2009 Ford F-350
- Q&A: Testing for Proper Voltage on the Brake Output Circuit
- Q&A: Do Any Of The ST145R12 Tire/Wheel Combos Come With Metal Valve Stems?
- Video: A Closer Look at the Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal
- Q&A: Replacement Bearings, Races, and Seal for Lippert 7,000 Pound Axle
- Video: Complete Breakdown of the Dexter Trailer Hub and Drum for 3,500-lb Axles
- Video: Detailed Breakdown of the Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles
- Video: Review of Dexter Trailer Hubs and Drums - Hub and Drum - DX62KR
- Video: Trailer Idler Hub Assembly for 2,000-lb Axles Spec Review
- Video: An In-Depth Look at the Kenda Karrier ST145/R12 Radial Trailer Tire with 12" Black Mod Wheel
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
Kate F.
9/12/2025
Hey Dennis, did you decide to stick with the Chinese races, or did you end up replacing them with the Timken ones? I'm curious because your experience could really help others in a similar situation.