Replacement Grease Seal for Dexter 7,000 lbs Axles
Updated 05/11/2026 | Published 05/06/2026
Products Featured in This Question
Question:
I have a 2025 Riverstone 42FSKG with Dexter 7000lb axles and disc brakes. Any idea which wheel bearing seals are needed for the rotors?
asked by: STEVEN W
Expert Reply:
Not without looking at your axle tag or the part number off of one of the seals Steven. Unfortunately, the Dexter 7,000 lbs axles have two different options for replacement grease seals. One measures 2.250" item # GS-2250DL and the other 2.125" item # GS-2125DL.
Do you have a picture one of the axle tags, or even a part number off of one of the disc brake rotors?
If you have a picture you can send it directly to the email address you receive this response from. If you have a part number you can put it below where it says Add Comment.
(click to enlarge)
Jerred H.
5/11/2026
Thanks for the picture Steven. I just heard back from Dexter and your 7,000 lbs axles require a 2.250" grease seal like item # GS-2250DL.
Product Page this Question was Asked From
Grease Seal - Double Lip - 2.125" ID - 3.376" OD - GS-2125DL
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.13 Inch I.D.
- 3.38 Inch O.D.
- etrailer
more information >
Continue Researching
- Search Results: lippert trailer suspension parts
- Search Results: wheel bearing grease
- Search Results: hitch pins and clips
- Search Results: trailer safety chains
- Shop: Coupler Pin - 1/4" Diameter x 2-1/2" Long
- Shop: Durabilt Clevis Slip Hook for 3/8" Chain - Grade 70 - 6,600 lbs
- Video: Ultimate Overview of the Leaf Spring Bushing
- Video: Let’s Check Out the Dexter Bronze Bushings
- Video: Installation Guide for the Dexter Bronze Bushings on a 2022 Grand Design Imagine Travel Trailer
- Video: Feature Breakdown: Replacement Wet Shoulder Bolt
- Search Results: wheel bearing seals
- Shop: LubriMatic Prime Guard High Temperature Wheel Bearing Grease - Red - 16-oz Can
- Shop: Replacement Wet Shoulder Bolt - Equa-Flex Tandem Axle Suspension - 9/16" x 3-3/8" - Qty 1
- Shop: Replacement Wet Shoulder Bolt - Equa-Flex Tandem Axle Suspension - 9/16" x 2-5/16" - Qty 1
- Shop: Dexter Bronze Bushings - Qty 4
- Shop: Replacement 7/16"-20 Flange Nut - Qty 1
- Q&A: Replacement Bearing Kit for Lippert and Dexter 7,000 lb Axles
- Q&A: Does Lippert Heavy Duty Shackle and Bolt Kit part # LC52SV Come with Bronze Shackles
- Q&A: Road Armor Equalizer that Could Fit 2022 Keystone Passport 282QB
- Q&A: LCI Road Armor Wet Bolt and Bushing Kit
- Q&A: Replacement Bronze Bushings for MoRryde CRE3000 Suspension System
- Q&A: What Wet Bolt Kits Work With Road Armor Equalizers LC696740
- Q&A: Replacement Wet Bolts For Lippert Shackle Kit On Road Armor Suspension.
Kevin
5/8/2026
Buy both grease seals to find the right one or use a tape measure or a starrett tool that measures inside and outside measurements. But definitely get a double seal grease seal and when you are ready to install make sure to put grease on the seal surface and if this is a boat trailer use grease that won’t wash out and fill up the spindle full of grease. Use rubber gloves and rags to clean up the mess. Good luck