Replacement Grease Seal for a 5,200 lbs Dexter Axle
Updated 01/30/2026 | Published 01/22/2026 >
Products Featured in This Question
Question:
Hello Etrailer I am trying to figure out which grease seal I need for my 5200lb Dexter axles. The sticker on the axle says 45015, with serial number 121821653 but I cant find that information online anywhere. Would you be able to help? Thank you!
asked by: Carlos M
Expert Reply:
Hey Carlos, thanks for the information and your patience. I reached out to Dexter with your information last week and still haven't heard back. There's two options to replace the grease seal on your Dexter 5,200 lbs axles.
2.125" ID - Grease Seal - Double Lip item # GS-2125DL
2.250" ID - Grease Seal - Double Lip item # GS-2250DL
The most accurate way to determine the correct grease seal you need is to pull one of your hubs and check to see if there's a part number stamped into the side. You can also use a digital caliper like item # PTW80157 to measure your trailer spindle where the grease seal rides so you know this will fit. That spot on the spindle is labeled as B on the diagram attached below.
If you're replacing the bearings as well we have complete kits for both size seals.
For a 2.125" ID - Grease Seal you'll need item # BK3-210
For a 2.250" ID - Grease Seal you'll need item # BK3-200
What specific model is your 2013 Dutchmen Komfort?
Product Page this Question was Asked From
Grease Seal GS-2125DL - Double Lip - I.D. 2.125" / O.D. 3.376" - 5.2K to 7K Axles - Qty 1
- Trailer Bearings Races Seals Caps
- Seals
- EZ Lube Seals
- Grease Seals - Double Lip
- 2.13 Inch I.D.
- 3.38 Inch O.D.
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- etrailer
more information >
Continue Researching
- Search Results: spare tire mount
- Search Results: bottle jack
- Shop: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to 26-3/4" Lift - 2 Tons
- Shop: Power Mountain Tallboy Off-Road Bottle Jack - 8-1/2" to 37-3/4" Lift - 6 Tons
- Shop: etrailer Spare Tire Mount for Trailer with Angle-Iron Railing - Clamp On
- Shop: Buyers Products Stake Pocket Spare Tire Mount
- Shop: Trailer Wheel Bearing Kit, LM67048/25580 Bearings, 25580/25520, 10-36 Seal
- Shop: Timken Bearing Kit, LM67048/25580 Bearings, LM67010/25520 Races, 413470 Seal
- Shop: Trailer Wheel Bearing Kit, LM67048/25580 Bearings, LM67010/25520, GS-2125DL Seal
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: trailer tires and wheels
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer hitch
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Trailer Wiring
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Shop: Suspension Enhancement
- Video: Hands-On with the Hub Saver Hub and Wheel Protector
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer jack
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: A Look at the Power Mountain Tallboy 6 Ton Off-Road Bottle Jack with a Military Cargo Trailer
- Search Results: trailer wiring
- Shop: Brake Controller
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Shop: Gooseneck Hitch
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown



Carl B.
1/30/2026
These seals and fittings are working well for me. My boat trailer has 3 axels. Hope this helps.