Replacement Grease Seal for 2024 Grand Design Influence 2903RL

Question

Question:

I have a 2024 Grand design Influence 2903RL. I need the grease seals for the hubs. I need to repack the bearings. It has Dexter 7000lb axles. Please send me a link thanks

asked by: Justin S

0

Expert Reply:

Hey Justin! 7k axles like yours can have two different grease seals. You either need # GS-2125DL (2.125" inner diameter) or # 10-36 (2.25" inner diameter). We don't have a way of knowing which one is on any given axle, but if you can send me the serial number off the axle tag, or a picture of the axle tag, Dexter will be able to identify it.

You can also measure the existing grease seal, or the spindle where the grease seal rides if you already pulled the hubs.

expert reply by: Robin H

0

10-36 Grease Seal
(click to enlarge)

Justin S.

5/1/2026

Hello thank you. The serial number off the axle is 132434407011.

Robin H.

5/1/2026

@JustinS well, Dexter just replied to me but they gave me bearings and seals for a 3.5k axle which is definitely not right. Might not hear back until Monday now.

Robin H.

5/5/2026

@JustinS you have a # 10-36 grease seal.

Answer 1

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 2

For a Dexter 7k axle the correct grease seal is the part #GS-2250DL. Or for a kit that has the correct bearings and seal you'd want the part #BK3-200.

view full answer...

Answer 3

The TruRyde Grease Seal part #RG06-070 and Dexter Oil Seal part #10-63 are both designed for the same size spindle as they have the same dimensions, 2.250" inner diameter and 3.376" outer diameter. That said, the TruRyde is a grease seal…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 9

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 10

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Replacement Grease Seal for 2024 Grand Design Influence 2903RL

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching