Replacement Hubs With 5 on 5 Bolt Pattern
Published 01/11/2018
Products Featured in This Question
Question:
I should have mentioned I have 17 inch rims for this project. A military style teardrop trailer I am building from scratch. Got a hub assembly kit I can use? The parts you referenced won't fit 17 inch rims... I need the whole kit, bearings, etc. What about a different bolt pattern for 17 rims? I could add some wheel spacers....
asked by: Ted J
Expert Reply:
We do have hubs available with a 5 on 5 bolt pattern; they are each compatible with 3,500 lb axles, have inner bearing # L68149 and outer bearing # L44649 and fit wheels that are between 13 inches and 15 inches. You need to take apart your old hub in order to find out if you have the same bearing numbers. If so hub and drum assembly # AKHD-550-35-K will work; for an idler hub assembly # AKIHUB-550-35-K would be the right choice. I've added a link to video reviews of these parts for you to take a look at as well as a link to our page with each of our hubs that have a 5 on 5 bolt pattern.
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Q&A: Replacement Brake Assemblies for Dexter 3,500 lb Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Printable Trailer Bolt Hole Pattern Template
- Q&A: Replacement 3500 lb Hub/Drum for TruRyde RVD-H-65535 10 Inch Trailer Brake Drum
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Replacement Trailer Brake Assemblies with Axletek-10-GG On Assemblies
- Q&A: Do all 3,500 lb Trailer Axles Have the Same Bearings
- Q&A: Torque Spec for Tightening Trailer Brake Assemblies to Trailer Spindle
- Q&A: How to Find Which Trailer Brake Assembly Goes on the Left or Right Side of a Trailer
- Q&A: What is the Inner Diameter of the 3,500 lbs Dexter Trailer Idler Hub Assembly?
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: How to Change the Axle on your Boat Trailer Without Leaving your Driveway
- Article: How to Measure a Boat Trailer Axle
Ted
1/11/2018
I should have mentioned I have 17 inch rims for this project. A military style teardrop trailer I am building from scratch. Got a hub assembly kit I can use? The parts you referenced won't fit 17 inch rims... I need the whole kit, bearings, etc. What about a different bolt pattern for 17 rims? I could add some wheel spacers....