What Bearings and Seals do I Need for my 8 on 6-1/2 Hub on 6k Axles
Updated 11/14/2025 | Published 11/12/2025
Products Featured in This Question
Question:
I have dexter 6000 axels. 8 on 6.5 with 9/16 studs 12 inch drums x 2 inches. 2002 Sanibel wide body 3102. What replacement drum with bearings do I need. I see 2 diffrent size outter bearing options.
asked by: Matthew M
Expert Reply:
Hey, Matthew!
I just want to make sure I’m understanding you correctly, when you mention needing two different size outer bearings, can you tell me a bit more about what you mean?
For a 6,000 lb hub with that bolt pattern, you’ll typically need:
Inner bearing: # 25580
Outer bearing: # 15123
If you’re replacing the bearings, it’s a good idea to replace the seal as well, since they often get damaged when removing the hub. Your setup most likely uses seal # GS-2125DL.
Let me know if you have any more questions.
(click to enlarge)
Product Page this Question was Asked From
Trailer Hub and Drum Assembly for Lippert ABS - 8K Axles - 12-1/4" - 8 on 6-1/2 - Oil Bath
- Trailer Hubs and Drums
- Hub with Drum
- ABS
- Oil Bath
- 25580 / 02475
- Standard Grade
- For 8000 lbs Axles
- 5/8 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Lippert
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: past orders
- Video: Hands-On with the Dexter Trailer Hub & Drum for 5,200- to 7,000-lb Axles
- Q&A: Looking For Hub/Drums For Dexter 6,000 lb EZ Lube Axle
- Q&A: Would Too Much Grease in a Trailer Hub Cause the Grease Caps to Fall Off
- Shop: Replacement Trailer Hub Bearing - 15123
- Shop: Dexter Trailer Hub & Drum for 5,200- to 7,000-lb Axles - 8 on 6-1/2 - 9/16" Studs - Pre-Greased
- Shop: Replacement Nut Retainer for 6-191 Jam Nut
- Shop: Trailer 4 on 4 Hub & Drum Assembly - 2,200 lbs. Axles - Hydraulic Brakes
- Article: Most Popular Wheel Bearings
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Search Results: trailer wiring
- Shop: etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers
- Shop: Trailer Wiring
- Search Results: trailer tires and wheels
- Shop: Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord
- Shop: Suspension Enhancement
- Search Results: trailer leaf springs
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Brake Controller
- Search Results: trailer jack
- Shop: Gooseneck Hitch
- Search Results: spare tire mount
- Shop: Base Plate for Tow Bar
- Shop: Fifth Wheel Hitch
- Q&A: Are There Any 16 8-Bolt 5/8 Lug Trailer Wheels
- Q&A: How to Attach Magnetic Emergency Light to Aluminum Body Truck
- Q&A: SoftStart for Furrion Chill RV AC Unit 13.5k BTU Unit
- Q&A: Needing Replacement Brake Drums With 5/8 Inch Wheel Studs on 8,000 Lbs Axles
Matthew M.
11/14/2025
I want to buy a complete drum with races, bearings and seal all packed and ready to install. Which drum/hub assembly do I need to buy for my 2022 Sanibel WB 3102 6000# axels 8 on 6.5 bolt pattern. 9/16 studs. 12 inch x 2 inch drums. ez lube axels.