Replacement Grease Seal for a Curt or Lippert V000845621 Axle
Updated 12/01/2025 | Published 11/10/2025
Question:
I am shopping for a set of four wheel bearing seals. For, 2024 Grand Design Reflection 295RL. Lippert Brake drum 2021027038 Lippert Axle is listed as V000845621. Thank You
asked by: James B
Expert Reply:
Hey James, thanks for the information. For a compatible grease seal you'll need the Grease Seal item # GS-2125DL. This grease seal has a 2.125" I.D. and 3.376" O.D.. It is sold individually.
What color are your brake drums? I found the seal size on Grand Design's website and was curious if you have the new ABS braking system.
You can add this information and any other questions you have where it says Reply to Jerred H and I'll be happy to answer them.
(click to enlarge)
Product Page this Question was Asked From
Grease Seal - Double Lip - 2.125" ID - 3.376" OD - GS-2125DL
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.13 Inch I.D.
- 3.38 Inch O.D.
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Identifying Hub and Bearings for 2001 Prestige Trailer
- Q&A: What is the Four Bolt Brake Mounting Flange for 8,000 Lb Axles
- Q&A: Cross Reference a Replacement for a TCM 21334 TB Grease Seal
- Q&A: Can Grease be Used in Oil Bath Hub
- Q&A: Replacement Trailer Rim With A 4,000 Plus Capacity
- Q&A: Correct Replacement Bearings and Seals for Dexter 7,000 Lb Axle
- Q&A: Troubleshooting Leaf Spring Coming In Contact With Brake Mounting Flange Bolt
- Article: How to Bleed Your Trailer Surge Brakes
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
Jerred H.
12/1/2025
Hey James, did the grease seal item # GS-2125DL end up fitting your Grand Design Reflection’s axle? Knowing how it matched up could help others with the same Lippert setup. Your update could make it easier for the next person working on their bearings.