We'll connect you with nearby partnered installers who know this exact setup.

ABS Fasteners

Curved Equalizer for 1-3/4" Double Eye Spring - 7-3/4" Long - 9/16" Hole

Part Number: A2252CB-GALV

130 Reviews | 19 Questions

In Stock

$30.19

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

abs fasteners trailer suspension parts standard equalizer double eye springs curved for 1-3/4 inch spring - 7-3/4 long 9/16 hole

abs fasteners trailer suspension parts standard equalizer 7-3/4 inch long

abs fasteners trailer suspension parts camper car hauler utility double eye springs

abs fasteners trailer suspension parts camper car hauler utility 7-3/4 inch long a2252cb-galv

abs fasteners trailer suspension parts standard equalizer double eye springs a2252cb-galv

abs fasteners trailer suspension parts camper car hauler utility double eye springs a2252cb-galv

abs fasteners trailer suspension parts double eye springs 7-3/4 inch long a2252cb-galv

Show All (8) Product Images

Show Fewer Product Images

In Use/Installed

0 trailer suspension parts abs fasteners standard equalizer double eye springs a2252cb-galv

0 trailer suspension parts abs fasteners standard equalizer camper car hauler utility in use

0 trailer suspension parts abs fasteners standard equalizer 7-3/4 inch long curved for 1-3/4 double eye spring - 9/16 hole

0 trailer suspension parts abs fasteners standard equalizer camper car hauler utility curved for 1-3/4 inch double eye spring - 7-3/4 long 9/16 hole

Show All (4) In Use/Installed

Show Fewer In Use/Installed

Customer Photos

Curved Equalizer for 1-3/4" Double Eye Spring - 7-3/4" Long - 9/16" Hole customer photo

Show All (5) Customer Images

Show Fewer Customer Images

Videos

Curved Equalizer for 1-3/4" Double Eye Spring Spec Review

All You Need to Know About the Curved Equalizer for 1-3/4" Double Eye Spring

Show All (2) Videos

Show Fewer Videos

We'll connect you with nearby partnered installers who know this exact setup.

SCHEDULE AN INSTALLATION

7-3/4" Long, curved equalizer connects double-eye springs on trailers with multiple axles. Allows for movement between axles to ensure a smooth ride. Great Prices for the best trailer suspension parts from ABS Fasteners. Curved Equalizer for 1-3/4" Double Eye Spring - 7-3/4" Long - 9/16" Hole part number A2252CB-GALV can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.

All Info
Reviews (130)
Q & A (0)
Related Parts
Photos

ABS Fasteners Trailer Suspension Parts - A2252CB-GALV

Highlights

7-3/4" Center-to-Center Length: Matches typical tandem or triple-axle suspension spacing.
9/16" Bolt Holes: Works with standard hardware for secure spring connection.
2-7/8" Height: Keeps factory ride height and suspension geometry correct.
Curved Equalizer Design: Smooths bumps by letting axles share the load evenly.
Fits 1-3/4" Double-Eye Springs: Direct link between spring eyes for stable travel.
Nylon Bushings Installed: Ready to mount, can swap to bronze for longer service life.

Features to know about

Smooth Ride Over Rough Roads: Curved Equalizer Transfers Load Evenly

Rough pavement and uneven ground can make a trailer bounce and sway. This 7-3/4" curved equalizer connects your double-eye leaf springs and lets the axles move in sync to smooth out the ride. It transfers the load between axles and absorbs sudden impacts so the trailer tracks steady and the cargo stays put.

Direct Replacement Fit: Sized Right for 1-3/4" Wide Double-Eye Springs

Getting the right geometry is key to keeping your suspension working properly. This equalizer fits 1-3/4" wide double-eye leaf springs with 9/16" spring eyes. The bolt holes—9/16" diameter each—measure 7-3/4" center to center side-to-side, 3-7/8" from the hanger bolt to side bolt, and 2-7/8" tall overall. With these exact dimensions, it drops in as a direct replacement when you need to refresh worn parts or match an existing setup.

Ready to Install: Nylon Bushings Already in Place

You don’t have to track down extra pieces to get started. This equalizer comes with nylon bushings already pressed into the bolt holes, so you can mount it right up with your shackle straps and center hanger (sold separately). The bushings help the bolts move smoothly and quietly until you’re ready to upgrade to bronze if you choose.

Lasting Protection: Durable Powder-Coat Finish

Road grime and moisture can eat away at bare metal over time. The powder-coat finish on this equalizer shields it from rust and corrosion so it stays solid through miles of towing. It’s a dependable piece that keeps the heart of your suspension working the way it should.

Specs

Compatibility

Fits: 1-3/4" wide, double-eye leaf springs with 9/16" spring eyes

Hole Diameters

Center bolt hole diameter: 9/16"
Left and right bolt hole diameter: 9/16"

Dimensions

Distance between left and right bolt holes (center on center): 7-3/4"
Distance between hanger bolt hole and side bolt hole (center on center): 3-7/8"
Height of side bolt hole to hanger bolt hole: 2-7/8"

Dimensional diagram of curved trailer equalizer showing bolt hole measurements, including 7-3/4 inch center-to-center width and 2-7/8 inch height, for ABS Fasteners A2252CB-GALV trailer suspension part.

EQ-E1 Curved Equalizer for 1-3/4" Double Eye Spring - 7-3/4" Long - 9/16" Hole

Customer Satisfaction Score:

98% were satisfied with this product

2% of customers were not satisfied

Product did not meet expectations
Wrong item was ordered
Did not arrive in time

2% of customers were not satisfied

Product did not meet expectations
Wrong item was ordered
Did not arrive in time

4.7

130 reviews

5 Stars		(107)
4 Stars		(16)
3 Stars		(3)
2 Stars		(0)
1 Star		(4)

by: Mark 01/28/2026

exactly what I needed. The salesperson I spoke with was really helpful and knowledgeable. If not for him, I would have ordered the wrong parts. I had some shipping issues on my last order, but this came really quickly and included an order that's not included with this review. Go etrailer!

Kate F.

1/28/2026

Glad to hear it was what you expected, and got it when you expected Mark =)

by: Dan Curtis 03/26/2014

The equalizers I purchased from etrailer were galvanized which I like and they came with bushings. I have been working on my boat trailer for the last couple weeks. I replaced the bunk boards and carpet, side boards and carpet (etrailer), new suspension parts, shackle plates, all new bolts/nuts, the leaf springs were okay. New fenders. I bought steel fenders locally, had them chrome/nickel plated and I also installed vinyl scratch guard on the undersides for road debris protection. See attached photos. Thanks.

Click to Enlarge

by: Kevin 10/14/2026

ALWAYS AWESOME SERVICE, QUESTION ANSWERING, AND FOLLOW UP

by: Chris 11/18/2025

Fit and finish great. Exact parts I needed to repair my trailer suspension. Thank goodness for etrailer! Hannah walked me through the process so that I got what I needed!! Very patient for dealing with someone that didn’t know all the terminology! Definitely recommend!! Thank you etrailer!

by: Lyndon 11/16/2021

My trailer hauls two commercial mowers and miscellaneous landscaping equipment all the time. My old equalizers were totally shot after 8 years of this use and these were exactly right. We shall see if they last 8 years as well.

Click to Enlarge

by: Jerry 02/25/2026

Extremely fast delivery, Thank! Packaged very well. Have not install yet but have used etrailer in the past and worked out great!

by: Timothy 08/11/2025

First time using Dacromet coated parts on my saltwater trailer. I haven’t installed the springs but they look well made. Hard to to stop

by: Adam 06/23/2026

nice product

by: Daniel 05/25/2025

Excellent replacement for original factory equalizer, we camp often at the coast and the galvanized finish will be better protection from rust & corrosion. The wet bolts and new shackles fit perfectly.

by: Christopher 09/25/2025

Excellent customer service.
Parts were heavy duty, greaseable and delivered fast.
Keep up the good work!!

by: Steve 03/05/2025

got tired of replacing one item here and one item there so I changed the whole suspension this time. The equipment has been good and the service was great. If I find anything goes wrong in the future, I am certain this company will stand behind the products they offer.

Brooke M.

3/6/2025

Thanks for the kind words, Steve! Means a lot to us. I am so glad you were able to find everything you needed for this project :) What all are you hauling with the trailer?

by: Mark 07/29/2025

Exact replacement. Easy to install.

by: Greg 11/12/2025

Looks good not installed yet. No issues with the one I purchased last summer

by: Leland 09/29/2022 One Year Later

Good quality. I ordered the MORryde Suspension Upgrade Kit and got bronze bushings which I recommend over the plastic.

by: Luke B. 09/20/2014

This is the only galvanized equalizer carried, dimensions turned out perfect to use with 25 1/4" springs, hangers on 29 1/2" centers. Happy with quality of construction even though a big 'made in China' stamp is on the back. Time will tell how well the galvanized coating stands up to salt water.

by: Eric 01/02/2023

Thank you too Tammie in customer service for getting what I needed for trailer, everything fits great. Loving the grease fittings on suspension kit.

by: George 08/20/2025

The parts fit perfectly and Sara made it all very easy. One phone call and I was done. I can't thank her enough for her knowledge and professional help.

by: Greg 02/13/2025

Received all items as ordered. The folks at etrailer were helpful and knowledgeable

by: Michael 06/09/2021 One Year Later

This was an exact replacement for my worn out equalizer, and after a year I can report that it is still working perfectly.

by: Jacob 07/02/2023

After using there professional support team (laughable). After several messages that just wasn't getting anywhere, gave them all the information they asked for via phone call. They provided part numbers for the products that I needed. One equilizer they recommend was taller than the one I had. I asked about that and they said it's ok they are all pretty standard at 7.75 inches wide... good thing I didn't listen to the pro and just ordered the right part on this.

by: Richard 01/13/2023

I Really like Etrailers team and website they are very helpful and the parts are always what I need to repair or make better then before.

by: George J 02/01/2018

The product looks to be very good. It appears will made with good galvanizing. I would have given it 5 stars however both of the ones I received were each missing a bushing insert. It wasn't a big deal for me because I ordered high end bushings to replace the factory nylon ones. If someone were to order this part counting on the bushings being there it could potentially be a problem.

by: Scott 11/08/2024 One Year Later

Makes my trailer pull like new and no suspension noise great product highly recommend

by: Steve. K 03/03/2017

Very pleased with products and ease of ordering. Everthing arrived packed very well in sturdy boxes. Your web page is one of the best I've seen in a while, keep up the great service. I will be back to shop again and will be telling freinds about you. Thanks for being so detailed oriented.

by: Clinton 07/15/2025

The part worked great once the correct part showed up.

130

true

Show More Reviews

See what our Experts say about this ABS Fasteners Trailer Suspension Parts

Do you have a question about this Trailer Suspension Part?

Looking For Upgraded Equalizer For Forest River 26DBH Travel Trailer
Hello Daniel, thanks for reaching out. The MORryde upgraded equalizers may work for you, but that will completely depend on what equalizer is currently on your trailer. Your trailers suspension is built around a specific equalizer size, so the replacement must be identical in size. There is a bit of tolerance, like 1/2" or less, but not much. There is no way to look up your trailer to know what equalizer you have though. If you take a look at your equalizer, there should be a number stamped...
view full answer...
How To Correctly Measure The Height Of An Equalizer
Good question. You are correct that the # A2252CB-GALV is 2-7/8" tall. When measuring an equalizer we will always go from center hole to center hole. The best way to measure the height is to first draw a line between the two lowermost holes, then draw a line from the center of the top hole and go down until you hit the first line you drew. The length of the vertical line will be the height. I have edited the image below to illustrate. When replacing an equalizer, it is imperative that...
view full answer...
Replacement Equalizer for a 2022 Grand Design Imagine XLS 22MLE
Hey Hugh, thanks for the information! I checked with Grand Design and you're going to need the 8,000 lbs Dexter E-Z Flex Suspension Kit item # K71-653-00. The 8,000 lbs equalizer matches your current item # A2252CB-GALV equalizer length wise and is also designed for 35" axle spreads. The Dexter E-Z Flex Suspension Kit item # K71-653-00 includes replacement shackle straps and upgraded suspension bolts. For a bumper mounted 2" hitch, I recommend our etrailer item # e38HR. This hitch...
view full answer...
Looking For Upgraded Equalizer And Shackle Bolts For 2025 Forest River Black Label 22RRBL
Hello Robert, thanks for reaching out. We should have what you need, but there is no way for me to look up your camper to know exactly what size equalizer and shackles you need. Any way you can get me those measurements? I will need to know the bolt to bolt length of your shackles, and I will also need the hole to hole length and height of your equalizer. If you look at the picture I included I would need the red and blue measurements. Reply on this page and let me know those measurements....
view full answer...
MORryde Suspension Upgrade For Tandem Axle Trailer With A2252CB-GALV Equalizers
Hello Jace. The MORryde Rubber Equalizers for the 33" wheelbase, part # MR87ZR is not going to work to replace the # A2252CB-GALV curved equalizer. The # A2252CB-GALV equalizer is 7-3/4" long and the # MR87ZR is only 6-1/2". There is a bit of tolerance when replacing the equalizer, but a 1-1/2" difference is way too much. The MORryde Shock Absorbing Suspension Equalizers # MR27ZR are a much better option. This equalizer is 8" long, so much closer in size to the stock equalizer. For...
view full answer...
Troubleshooting Equalizers Rock Forward When Trailer Sitting Level and Leaf Springs Touch Frame
Hi Colton; are you replacing the leaf springs as well? Is that what you mean when you say you have 4 springs 25-1/4"ish for front and rear and 26" for the rear? Replacing the equalizers isn't a bad idea while you're working on this but I don't see that being the main issue. It sounds like your leaf springs are completely worn out which is throwing everything off while allowing them to contact the trailer frame. Replacing them will likely solve your problems. Unless you have changed the...
view full answer...
What Is The Difference Between TREQE1 And A2252CB-GALV?
That is an extremely good question, Don. The # A2252CB-GALV used to be galvanized, but it looks like that changed fairly recently and is no longer the case. The # TREQE1 was always just painted black. With that said, they measure exactly the same in every way and now have the exact same coating as well. I am going to see why we haven't removed the # A2252CB-GALV from our site as it really doesn't make a lot of sense to have it any more. Especially with it being so much more expensive....
view full answer...
Replacement 7-3/4 Inch Equalizer and Heavy-Duty Suspension For Tandem Axle Trailer
Thank you for all that info, and replacing the equalizers, as well as upgrading the suspension hardware is going to be the best option for you. The correct size equalizer, as well as the suspension kit that I recommend is the following: - Curved Equalizer for 1-3/4" Double Eye Spring - 7-3/4" Long - 9/16" Hole # A2252CB-GALV - MORryde Suspension Upgrade Kit for Tandem Axle Trailers # MR76ZR The MORryde kit will give you a much-upgraded suspension kit. The reason for that is its 1/2 inch...
view full answer...
Upgraded Cushioned Equalizer for A2252CB-GALV for 2020 Coachmen Chaparral 295X 5th Wheel
Assuming that your shackle links measure 2-1/4 inches center hole to center hole, the ideal replacement for your existing # A2252CB-GALV suspension equalizers would be the # K71-653-00 E-Z Flex kit from Dexter Axle which is good for axle capacities up to 8000 lbs and 35 inch axle spacing. I spoke with my Dexter representative who confirmed that this would be a great fit, assuming the center bolt to center bolt dimension of your shackle links are 2-1/4 inches. The cushioned equalizer matches...
view full answer...
Replacement 3,500 lb Leaf Springs & 7-3/4 Inch Wide Equalizer
Thanks for all that info and we can get you exactly what you are needing. Since you have a 2-3/8" axle that would be a 3,500 lb axle, so you want leaf springs rated for that weight. The concern with springs that exceed the rating of your axle is that they will give you a very stiff, rigid ride, so you want to stay with the correctly rated springs. I'll go ahead and list out the parts you need, with a couple notes. First is that leaf springs elongate slightly over time, which is why the...
view full answer...
How to Determine Equalizer Upgrade For Dutchmen Voltage Toy Hauler
Hi Norman, We can help you out with determining the right equalizer upgrade for your Dutchmen Voltage, though don't have a way of knowing specifically which part you need. It's pretty easy to determine though, as you just have to take a couple measurements. What you want to do is match the dimensions of your current equalizers to replacements (or get very close). For example, if your equalizers measured 8" across from center-to-center of the bolt holes and 3-1/2" vertically (as in the...
view full answer...
What MORryde Equalizer For Triple Axle Trailer With 7-3/4" Long Equalizer
Hi Norman, Thanks so much for that info! With that, I can verify with those measurements, you do have the right parts for your trailer: - MORryde Rubber Equalizers for Triple Axle Trailers - 35" Wheelbase # MR39ZR - MORryde Suspension Upgrade Kit for Triple Axle Trailers - 2-1/4" Long Shackle Straps # MR86ZR
view full answer...
3,500 lb Axle And Leaf Spring Setup - What Parts Do I Need?
We can set you up with all of that. We do offer a 3,500 lb 95" hub face axle # e68GR. The spring seats on this axle are at 80", so we can sell you a few loose spring seats # TRSS238 and you can have them attached at 76". We can also provide new U-bolts # CE23002 for mounting the axle. We can get you some electric brake assemblies # AKEBRK-35-SA and hubs # AKHD-545-35-G-EZ-K to go with it. The hubs have the standard 5 on 4-1/2" bolt pattern. We can also set you up with springs. If you...
view full answer...
Curved Equalizer Coating Type and Bushing Outer Diameter
The Curved Equalizer for 1-3/4" Double Eye Spring # A2252CB-GALV is not galvanized but it has a powder coat finish which is pretty standard when it comes to trailer suspension parts. The OD of the 9/16" bushing is 11/16" so to replace that with a 1/2" ID bushing you'll need the part # TRBU11506.
view full answer...
Height of Equalizer in Tandem Axle Hanger Kit APT5 and Replacement Shackle Straps
The center equalizer of the Tandem-Axle Trailer Hanger Kit for Double Eye Springs item # APT5 is 7-3/4 inches long (center of bolt hole to center of bolt hole) and measures 3-3/16 inches tall. The equalizer can be purchased individually item # TREQE1 it has a has a 9/16 inch center bolt hole. Unless you are wanting to replace your spring hangers I recommend purchasing the Curved Equalizer for 1-3/4" Double Eye Spring - 7-3/4" Long - 9/16" Hole item # A2252CB-GALV and the MORryde Suspension...
view full answer...
Does the Equalizer part # A2252CB-GALV Come with Bushings
The Equalizer part # A2252CB-GALV that you referenced does have nylon bushings installed in it already.
view full answer...
Can I Use The MORryde Suspension Upgrade Kit Part MR46ZR On My Haulmark 16ft Enclosed
Thanks for your question, Marco. The MORryde kit part # MR46ZR will definitely work if your equalizer has similar specs to part # A2252CB-GALV. The main things you want to make sure of is the length of the shackle straps. You don't want them to be longer than your existing ones. If they are the same 2-1/4" long and have a 9/16" diameter.
view full answer...
Is There a Weight Rating for the ABS Fasteners A2252CB-GALV Equalizer?
Equalizers like the ABS Fasteners # A2252CB-GALV actually will not carry a max capacity, but I can definitely say they will work with your weight rating. As long as your current equalizer measures 7-3/4 inches from center to center of the holes horizontally and 2-7/8 inches tall, this will be a great replacement.
view full answer...
Replacing Suspension And Wiring On A 2006 Top Brand 7x18 Car Hauler Trailer
Hey Dan I can definitely help with all of this. The # e43SR Trailer Axle that you were looking at comes with electric drum brake assemblies. In order to connect this to the 7-pin connector on your truck you will simply need a 7-way trailer harness such as part # 50-67-106. This comes with a 7-way plug with 18' of jacketed 7-wire. Since the electrical is trashed, you can use this to completely replace the trailer wiring for the brakes and lights. No separate actuator will be needed since...
view full answer...

Do you have a question about this Trailer Suspension Part?

Info for this part was:

Expert Research:

Mike L

Expert Research:

Jameson C

Edited by:

Lindsey S

Installed by:

Jeff D

Installed by:

Cole B

Installed by:

Bradley B

Video Edited:

Jacob T

Updated by:

Laura H

Updated by:

Mike S

Updated by:

Eric H

Updated by:

Carrie F

Video by:

Dustin K

Written by:

Lisa S

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.