3,500 lb Axle And Leaf Spring Setup - What Parts Do I Need?

Published 09/22/2023

Products Featured in This Question

Trailer Axle Beam with Easy Grease Spindles - 4" Drop - 94" Long - 7,000 lbs

(259)

$508.61

Curved Equalizer for 1-3/4" Double Eye Spring - 7-3/4" Long - 9/16" Hole

(122)

$31.60

etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K

(3180)

$179.47

Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles - 10" Diameter - 5 on 4-1/2 - Galvanized

(769)

$168.82

CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc

(1037)

$41.53

Trailer Axle Beam with Easy Grease Spindles - 95" Long - 3,500 lbs

(259)

$368.89

4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 27" Long

(2231)

$62.24

MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps

(2158)

$125.09

Spring Seat for Typical 3,500-lb, Round Trailer Axles with 2-3/8" Diameter

(648)

$15.39

Question:

Hello, I looking for 2 3500 axles with brakes and spring kits with sizes: 95 hub, 76 spring center to spring center. Are you able to help me with that?

asked by: Mikhail K

Expert Reply:

We can set you up with all of that. We do offer a 3,500 lb 95" hub face axle # e68GR. The spring seats on this axle are at 80", so we can sell you a few loose spring seats # TRSS238 and you can have them attached at 76". We can also provide new U-bolts # CE23002 for mounting the axle.

We can get you some electric brake assemblies # AKEBRK-35-SA and hubs # AKHD-545-35-G-EZ-K to go with it. The hubs have the standard 5 on 4-1/2" bolt pattern.

We can also set you up with springs. If you are replacing old springs, we would need to confirm the eye-to-eye length of the current springs, in order to be sure they will fit with your current hanger spacing. If you are building something from scratch, a very common spring is the # e97SR which is 27" long eye to eye. You can use a hanger kit like the # H248 if you are in need.

For a bolt/shackle kit I recommend the MORryde Suspension Upgrade Kit # MR46ZR which will contain all of your bolts and shackles. The MORryde kits are very high quality with heavy duty extra thick shackles, wet bolts and bronze bushings. You can also use an equalizer # A2252CB-GALV.