Curved Equalizer Coating Type and Bushing Outer Diameter
Updated 05/01/2023 | Published 04/26/2023
Products Featured in This Question
Question:
My project is a tandem boat trailer. Im interested in Equalizer #A2252CB-GALV. Q1: Is it galvanized? Q2: All the hangers are welded and have 1/2 bolts, not 9/16. So, I will need to replace the middle equilizer bushing. What is the bushing OD? Thanks for your help
asked by: Kenneth P
Expert Reply:
The Curved Equalizer for 1-3/4" Double Eye Spring # A2252CB-GALV is not galvanized but it has a powder coat finish which is pretty standard when it comes to trailer suspension parts.
The OD of the 9/16" bushing is 11/16" so to replace that with a 1/2" ID bushing you'll need the part # TRBU11506.
Product Page this Question was Asked From
Curved Equalizer for 1-3/4" Double Eye Spring - 7-3/4" Long - 9/16" Hole
- Trailer Suspension Parts
- Standard Equalizer
- Camper
- Car Hauler
- Utility Trailer
- Double Eye Springs
- 7-3/4 Inch Long
- Tandem Axle
- Triple Axle
- ABS Fasteners
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Looking For Caliper To Replace Discontinued Tie Down Engineering 46802 Caliper
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Replacement Landing Gear and Equalizers for a 2008 Keystone Cougar 5th Wheel
- Article: Thank you!
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Wiring Diagrams
- Q&A: How to Measure the Offset of a Trailer Wheel
- Q&A: How to Tell if my Trailer Wheel Has an Offset or Not
- Q&A: Recommended Replacement Black Wheels for a Tow Master 14-D Equipment Trailer
- Q&A: What Info is Needed to Pick Out Correct Offset 17.5 inch Wheel
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Raise Your Travel Trailer Height