Replacement 3,500 lb Leaf Springs & 7-3/4 Inch Wide Equalizer
Updated 02/07/2022 | Published 02/02/2022
Products Featured in This Question
Question:
I had an incident where the leaf springs on one of my rear axles broke and so now want to do a full replacement but need some help picking out the right parts. The axle does not have any sticker or anything on it, but it does measure to be 2 3/8 inches. Is there concern with having springs that exceed the rating of the axle? The leaf measured 25 1/2 inches from the center of the eye to the center of the other eye. The equalizer measured 7 11/16 inches horizontally from bolt to bolt but I wasn't entirely clear on how to take the other measurement (there's a lot of rust and gunk and it was raining so it could very well be 7 3/4, as I see you have on the site Thanks
asked by: Walter P
Expert Reply:
Thanks for all that info and we can get you exactly what you are needing. Since you have a 2-3/8" axle that would be a 3,500 lb axle, so you want leaf springs rated for that weight. The concern with springs that exceed the rating of your axle is that they will give you a very stiff, rigid ride, so you want to stay with the correctly rated springs.
I'll go ahead and list out the parts you need, with a couple notes. First is that leaf springs elongate slightly over time, which is why the correct replacement is one a bit shorter than 25-1/2 inches. Second is that the only other measurement you'll need is the length of your shackle straps (from center hole to center hole) to ensure your suspension stays at the same height, so I'll list the most common sizes.
- 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/8" Long # e54SR
- Curved Equalizer for 1-3/4" Double Eye Spring - 7-3/4" Long # A2252CB-GALV
- Shackle Bolt For Double Eye Springs - 9/16" Diameter - Plain - 3-1/4" Long # ABS54FR
- Locknut for Trailer Shackle Bolt - 9/16" Diameter # TRFA916DLNZ
- U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts # APUBR-1
- Shackle Strap - 2-1/4" Long # TRSL225, 2-5/8" Long # 115052, 3-1/8" Long # TRSL313
Keep in mind that for your tandem axle trailer, since you're replacing both sides you'll need eight shackle straps, 14 bolts, and 14 locknuts.
Product Page this Question was Asked From
U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
- Trailer Suspension Parts
- U-Bolt Kits
- Camper
- Car Hauler
- Utility Trailer
- 3500 lbs
- Round Axle - 2-3/8 Inch
- 7/16 Inch Diameter
- 5-1/2 Inch Long
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer leaf springs
- Search Results: trailer suspension parts
- Search Results: bushing
- Search Results: equalizer
- Search Results: 7 3/4 equalizer
- Search Results: equalizers
- Search Results: bushings
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Shop: Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links
- Shop: CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc
- Shop: Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - 9/16" Center Hole
- Shop: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 26" Long
- Shop: Dexter Bronze Bushings - Qty 4
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Q&A: Torque Rating Requirements for Installing Leaf Springs on a 7000 lb Tandem Axle Trailer
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Video: The Low-Down on the Dexter Shackle Bolt for Double Eye Springs
- Video: All You Need to Know About the Replacement Flange Nut for Dexter Trailer Suspension Kits
- Video: All About the Replacement 7/16"-20 Flange Nut
- Q&A: Installation Instructions for Dexter 3-Leaf Double-Eye Spring for 3,500-lb Trailer Axles
- Article: Where to Position the Trailer Axle?
- Q&A: How Tight Should Shackle Bolts Be Tightened On Trailer
- Video: Hands-On with the Malone Foam Spacer Blocks for SUPs and Surfboards
- Q&A: What is the Torque Requirement for 1/2 Inch U-Bolts for Trailer Suspension
- Video: All About the CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles
- Video: Review of the etrailer Rust-Resistant 4-Leaf Double Eye Spring for 5K Trailer Axles
- Video: Let’s Check Out the CE Smith U-Bolt Kit for Mounting Round Trailer Axles
- Q&A: Troubleshooting Tandem Axle Trailer Leaf Springs Hitting Trailer Frame at Equalizers
- Q&A: Replacement Leaf Springs for 2017 Grand Design Imagine 2600RB
on Trailer Suspension Parts
