MORryde Suspension Upgrade For Tandem Axle Trailer With A2252CB-GALV Equalizers
Updated 01/19/2026 | Published 08/12/2024
Products Featured in This Question
Question:
Hi, Im looking to upgrade my tandem axle trailer with the MORryde kit https://www.etrailer.com/Trailer-Suspension-Parts/MORryde/MR87ZR.html I measure 33inch wheelbase so that part is right but the measurements of the old equalizers are the same as these: https://www.etrailer.com/Trailer-Suspension-Parts/ABS-Fasteners/A2252CB-GALV.html My shackles are the 3 1/8inch center to center. Would that MORryde kit work with my trailer with those size differences? I would likely order the shackle kit from MORryde as well.
asked by: Jace
Expert Reply:
Hello Jace. The MORryde Rubber Equalizers for the 33" wheelbase, part # MR87ZR is not going to work to replace the # A2252CB-GALV curved equalizer. The # A2252CB-GALV equalizer is 7-3/4" long and the # MR87ZR is only 6-1/2". There is a bit of tolerance when replacing the equalizer, but a 1-1/2" difference is way too much.
The MORryde Shock Absorbing Suspension Equalizers # MR27ZR are a much better option. This equalizer is 8" long, so much closer in size to the stock equalizer.
For the Shackle kit use the MORryde Suspension Upgrade Kit # MR76ZR which comes with the 3-1/8" HD shackles, wet bolts and bronze bushings.
Product Page this Question was Asked From
MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 6-1/2 Inch Long
- Tandem Axle
- MORryde
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: SolidStep Locking RV Storage Box - Powder Coated Steel - 100 lbs
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Shop: MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K
- Shop: Curved Equalizer for 1-3/4" Double Eye Spring - 7-3/4" Long - 9/16" Hole
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Shop: Global Link RV Entry Door Locking Latch Kit with Keyed Alike Option - Bluetooth - Black
- Shop: Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers - 5,200-lb to 7,000-lb Axle
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Video: Ultimate Overview of the Global Link RV Entry Door Locking Latch Kit with Keyed Alike Option
- Video: 45-Degree T-Style Hook and Keeper Door Holder for Enclosed Trailer Spec Review
- Q&A: Recommendation for a 2-5/16 Inch Trailer Hitch Coupler Lock
- Q&A: Troubleshooting Lower Suspension Height On a 371 Fuzion 5TH Wheel Toy Hauler With MORryde CRE3000
- Q&A: Recommended MoRryde Equalizer and Replacement Shackles for a 2023 CrossRoads Sunset Trailer
- Q&A: Replacement Leaf Springs and Shackles for 2014 Evergreen Amped 28FS Toy Hauler
- Q&A: Should MORryde Equalizer Kit MR87ZR Or MR27ZR Be Used With 35" Axle Spacing?
- Q&A: Comparing Lippert Equa-Flex Cushioned Equalizers # LC279688 and # LC145546
- Search Results: jack pad
- Search Results: lippert storage
- Search Results: jack stand
- Search Results: victron
- Video: MORryde Tandem Axle Trailer Suspension Upgrade Kit Installation - 2018 Shasta Phoenix Fifth Wheel
- Video: What to Know About the Goal Zero Alta 80 Portable Electric Cooler
- Q&A: How Do I Measure Axle Spread for Upgrading The Trailer Equalizers?
- Search Results: equalizer
Jesse M.
1/19/2026
Hey Jace, how did things go with the MORryde shock-absorbing equalizers and the suspension upgrade kit? Did the fit end up matching your trailer’s setup better than the original option? Your update could make it easier for others working through the same upgrade.