bing tracking image
  1. Trailer Jack
  2. etrailer
  3. Boat Trailer
  4. Utility Trailer
  5. 1001 - 2000 lbs
  6. Manual Jack
etrailer Boat Trailer Jack w/ Dual Wheel - Sidewind - Swivel - 10-3/8" Lift - 1,500 lbs
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
etrailer

etrailer Boat Trailer Jack w/ Dual Wheel - Sidewind - Swivel - 10-3/8" Lift - 1,500 lbs

$81.60
Trailer Jack
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Get more traction and stability on uneven ground than with 1-wheeled jacks. Dual wheelbase swivels 360 degrees for maximum maneuverability. Marine-grade zinc resists rust and corrosion. Great Prices for the best trailer jack from etrailer. etrailer Boat Trailer Jack w/ Dual Wheel - Sidewind - Swivel - 10-3/8" Lift - 1,500 lbs part number MJ-1500B-DWL can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (1144)
  • Q & A (0)
  • Photos

etrailer Trailer Jack

Highlights

  • 1,500-Lb Lift Strength: Raises and supports boat or utility trailers with steady control.
  • Dual-Wheel Stability: Two 5-3/4" x 4" wheels roll easy and hold steady on uneven ground.
  • Full 360° Swivel: Rotating wheelbase makes hand-moving and tight turns simple.
  • Quick-Swing Storage: Swivels up smoothly when towing, keeping the jack clear of obstacles.
  • Rust-Ready Zinc Finish: Marine-grade coating stands up to water, salt, and weather exposure.
  • Easy Bolt-On Fit: Mounts to 2"–4" trailer frames using included bracket and hardware.

Features to know about

Easier Maneuvering: Dual Wheels Provide Smooth, Stable Rolling

Dragging a loaded trailer across gravel or grass can feel like tugging through mud when the jack only has one wheel. This jack uses a dual-wheel setup that’s 5-3/4" in diameter and 4" wide for twice the stability of a single-wheel design. The wider stance keeps the trailer balanced and rolls smoother when moving by hand, especially on uneven ground. The wheelbase swivels a full 360 degrees so you can pivot and position the trailer exactly where you want it without fighting the weight.

Built to Last: Zinc Finish Fights Rust and Corrosion

Rain, salt water, and storage moisture are no match for the marine-grade zinc coating on this jack. The clear zinc finish resists corrosion, so you can rinse it off after launching or hauling and know it’ll stay smooth and dependable. The sturdy steel construction gives it that heavy-duty feel reviewers noticed right away—solid, not flimsy—and keeps it looking good season after season.

Quick Setup: Bolt-On Mount with Smooth Swivel Action

Installation doesn’t get much simpler. The included mounting bracket and hardware clamp securely around trailer frames from 2" to 4" tall—no drilling needed. Once mounted, the J-bolt handle lets you position the jack fast, and a spring-loaded pin releases it to swing up or down without binding. The sidewind handle has a 6-1/2" radius, giving you an easy, comfortable crank without your hand bumping the trailer frame. When you’re done, it locks firmly upright and out of the way.

Reliable Lifting: Strong Support with 10-3/8" of Lift

With a 1,500-lb lift capacity and 10-3/8" of lift, this jack handles small to mid-size trailers with ease. The bracket height ranges from 12-5/8" retracted to 23" extended, giving you the reach to hitch up or level the tongue without stacking blocks. The motion is smooth under load—no jerks or grinding—thanks to tight gearing and quality build. It’s the kind of upgrade you notice the first time you crank it.

Specs

Application

  • Trailer frame height range: 2" to 4" tall

Weight and Capacity

  • Lift capacity: 1,500 lbs

Bracket Height

  • Retracted: 12-5/8"
  • Extended: 23"

Lift

  • Lift: 10-3/8"

Dimensions

  • Handle radius: 6-1/2"
  • Inner tube diameter: 2"
  • Outer tube diameter: 2-1/4"
  • Dual-wheel dimensions: 5-3/4" diameter x 4" wide

Dimensional technical diagram of the etrailer Boat Trailer Jack model MJ-1500B-DWL showing measurements for lift height, bracket placement, and dual-wheel assembly for trailer compatibility.

Warranty

  • Warranty: 1-Year

Installation

Technical diagram showing the mounting bracket dimensions for the etrailer MJ-1500B-DWL boat trailer jack, including bolt hole spacing and bracket layout for installation reference.

MJ-1500B-DWL etrailer by Ram Round Swivel Marine Jack - 2 Wheel - Bolt On - Zinc - Side Wind - 10-3/8" Travel - 1,500 lbs

Similar to FXPD15L and FXP10 Fulton Boat Trailer Jacks (Except Bolts onto 2" x 4" Frames)

Item # MJ-1500B-DWL





Customer Satisfaction Score:

Ratings & Reviews

4.8

1144 reviews
5 Stars
(989)
4 Stars
(110)
3 Stars
(19)
2 Stars
(10)
1 Star
(16)
Review Sort Icon
by:
It is much harder to crank than a new jack should be. The quality is typical for this type of jack. I expect it to last a 2 years. The biggest problem with all these jacks is the quality of materials used is fairly low. All of the parts except the 2 main gears wear out allowing everything to shift in a way that they do not operate well. The long threaded bolt is also not easily serviceable making the part that is most susceptible to rust a problem. I am tempted to drill several holes in the side so I can regularly spray the long bolt and keep it moving.
by:
Went from a single wheel 1,000 lb. to this one from eTrailer, wow! What a difference. This is great. Turns on a dime with no bending, pushing, or straining required.
by:
I bought this as a replacement for the trailer jack/wheel on my 2500 pound Worthington utility trailer. So far it's been very good. I would buy again. The crank wheel works smoothly and the swing up/down mechanism is easy to use. My trailer lives outside in New England and occasionally gets used during the winter when there is salt on the road - and there is no rust on the jack.
by:
Shipping was quick and the jack fits perfectly. This is an upgrade from my single wheel jack. I like that all hardware was included so I didn't have to reuse old rusty mounting bolts.
by:
This was super easy to install. It is sturdy, well-built, and easy to use. Definitely a great addition to my cargo trailer. Just do not forget to buy a chock.
by:
A great add on to my utility trailer. Very impressed with the overall sturdiness.
by:
I love this trailer jack! It works perfectly for my low 12’ utility trailer, replacing the original twenty year old light weight jack. The installation was super easy, but I did watch the product installation video, and took all of 10 minuets. The fit is perfect and the side crank is so much better than the old top crank, which would hit the spare tire when using. The wheels make it super easy to roll around and maneuver. I highly recommend this to anyone needing a replacement jack. It is much heavier duty than expected for the price and well worth the cost. Excellent product!!!
by:
Works as expected. Two wheels are stable.
by:
It fits, it works.
by:
Great replacement
by:
Purchased trailer jack w/2 wheels, product description states "dual wheels swivel 360° for maximum maneuverability". It doesn't, not close, even with the trailer weighing 375 lbs. unloaded. Spoke with etrailer about the problem, I was told the dual wheels are not intended for moving trailer. Lousy answer and I'll never do business with them again.
by:
I installed this on our wood splitter. The splitter came with a lame metal post that was near impossible for one person to flip out of the way when towing. This swivel jack works perfect for attaching the splitter to our four wheeler to move it about our property. The jack holds the splitter while in use just fine.
Heidi profile picture

Heidi

5/1/2025

I use our log splitter each year for a couple of weeks to get all our wood for the next s winter split. I just finished that task. The Jack that I installed in order to make the splitter much easier to move around, either by hand or by attaching it to our ATV, is working as I had hoped. It still looks new after a year. And it works flawlessly.

by:
I bought 3 of these and hooked them to the bottom of my backyard trampoline.
It lets one person "jack up" the trampoline and move it around when mowing.
I've had them a year and they show no signs of rust, and have weathers well.
by:
Works Great!!
by:
Great product. Order process was easy and the trailer jack arrived quickly.
by:
Fitted to a 1960 Tee Nee boat trailer. makes it very easy to move around! Very well made.
by:
The jack is heavy duty and wheel wide to make moving easier. We have jack mounted but rotating the jack from vertical to horizontal to vertical is very difficult. Hoping that lube and use will loosen it up.
by:
Great heavy duty !!!
by:
Always great service.
by:
Build is better than expected. Wheels rotate independent of each other with no binding. Crank is abundantly easy, pin latch is very secure. Using this on a homemade large duck house) chicken tractor and just drilled 2 3/8 holes through a vertical 2x4 and used existing hardware.
Joseph profile picture

Joseph

1/13/2022

Its been a year and this has still been a solid purchase. Outside in the chicken house used once or twice a week and constantly in the weather it has no rust, no bending, no issues at all really. The small plastic wheels like to collect mud but it s right off with a few taps.

by:
Finish looks durable. Sturdy packaging. Smooth operation.
by:
Perfect upgrade for the stock non-folding tongue jacks. I wish I bought one that lifts higher, but that's on me obviously.
by:
may be it seems to crank alittle harder than the old one, but thats ok!
by:
The product arrived quickly and well packaged to reduce damage to product. I would recommend this company for your trailer needs. David
by:
As usual with etrailer, this utility wheel is extremely well built and heavy duty! Probably way overkill for my log splitter, but with having to many birthdays, it should be much easier to move around the property!

Never have issues with ordering and using the products from etrailer.
Always recommend them, as with this trailer wheel.
25
1144
true
Show More Reviews

See what our Experts say about this etrailer Trailer Jack

  • Will the 1.5k etrailer Boat Trailer Jack w/ 2 Wheels Be Strong Enough for a Small Camper?
    Hey Christian welcome back! The etrailer Boat Trailer Jack w/ 2 Wheels item # MJ-1500B-DWL is definitely going to be strong enough for your camper. The 1,500 lbs capacity is for the tongue weight. Tongue weight is typically 10% of your trailer's total weight so this jack will work great. What kind of trailer do you have and what kind of ground do you typically set up camp on? You can add this information, along with any other questions you have, where it says Add Comment.
    view full answer...
  • Recommended EZ-Lube Spindle for a Carry-On 5' x 8' SP Series Trailer
    Hey Steve, thanks for the information. I tripled checked this but for whatever reason, Carry-On put a 2,000 lbs E-Z Lube axle pn 2K7158EZ on your 5' x 8' SP Series trailer and then decided to put spindles on it (pn 151T) that are not EZ-Lube. I looked at quite a few pictures of the 151T spindle online and they do not have the hole in the rear of the spindle or on the side where the hub sits that allows the grease to travel through. If you look at the pictures for the BTR E-Z Lube Spindle...
    view full answer...
  • What is the Length of the etrailer Boat Trailer Jack from the Mount to the Top of the Jack?
    Good question A H, thanks for asking! The distance from the center of the mounting bracket to the top of the etrailer jack #MJ-1500B-DWL is 13-7/8 inches when the jack is fully retracted. The bracket height itself from the center of the bracket to the bottom of the wheels is 12-5/8 inches retracted and the outer tube extends about 1-1/4 inches above the bracket. Do you have anything on the trailer tongue? what do you tow most?
    view full answer...
  • Side Mounted Trailer Jack With Dual Caster Wheels
    Hi Neal! We may have an option for you, but the foot plate on the etrailer Round, Pipe Mount Swivel Jack w/ Footplate - Weld On - Sidewind - 10" Travel - 3,000 lbs # TJP-5001S-B is indeed welded on and cannot be removed without seriously altering the jack. The typical caster wheels we have for jack are not rated anywhere near the 3,000 pound capacity of this jack, and you would need to further alter the leg to get a pin to keep that caster wheel in place. I'm not saying this can't be done,...
    view full answer...
  • Looking For Jack For Utility Trailer That Is 15" Or Less Retracted
    Hey Ken, thanks for reaching out. Yes, that is a thing. For example, the etrailer Boat Trailer Jack # MJ-1500B-DWL is only 12-5/8" tall retracted. It extends up to 23" and it swivels sideways so you can store it during travel. It will fit really any trailer frame between 2" and 4" tall. It also has a dual caster wheel which helps with stability. What kind of trailer is it? What do you usually haul in it?
    view full answer...
  • Recommended Side Mount Trailer Jack for a Pontoon Boat Trailer
    Hey Bruce! I'm not too sure what you're looking for, but I see that you were looking at trailer jack's so I'll assume that's what you're referring to. If this is the case, the etrailer Boat Trailer Jack w/ 2 Wheels # MJ-1500B-DWL would be a great choice! This jack is will fit frames 2" to 4" wide, has a 1.5k lift capacity, and is a bolt-on side mount, with a sidewind operation. If it was something different you were referring to, please let me know in the comments and I'd be happy to help!
    view full answer...
  • Can I Replace My Fulton F2 Jack with an etrailer Boat Trailer Jack? Will it Mount to My Fulton Plate
    Hello Cole, Thanks for finally finding a reason to write into us, I see you have been a faithful etrailer neighbor (customer) since 2013. Unfortunately, the etrailer Boat Trailer Jack w/ Dual Wheel, Sidewind, Swivel, 10-3/8" Lift, 1,500 lbs # MJ-1500B-DWL will not bolt directly to the 3-1/2" x 4-1/2" mounting pattern used by the Fulton F2. The Fulton F2 uses a unique mounting pattern, and at this time I'm not aware of an etrailer jack that is a direct bolt-on replacement for that bracket. I...
    view full answer...
  • How To Keep The etrailer Boat Trailer Jack MJ-1500B-DWL from Rusting
    Hello Brooks. The etrailer Boat Trailer Jack # MJ-1500B-DWL does not have a zerk fitting for adding grease. The best way to keep rust at bay is to keep the jack clean and dry. Rinse it with fresh water after dunking it in the salt, and do your best to get it dry and keep it dry when in storage.
    view full answer...
  • Ramp to Load a Motorcycle Up on a Decked Pickup Bed
    Hey, Phil. If you want something that is best for your motorcycle, you're going to want to go with the Caliber MX Pro MotoCross Loading Ramp part # CA44KJ. The top of the ramp has Calibers integrated LowPro GripGlides that will help keep the tires of your motorcycle centered on the ramp when loading and unloading and rated for 3,000 lbs. This is one of our longest truck bed ramps at 89". We do carry a longer ramp like Gen-Y part # GY77WR that is 96" long. This ramp doesn't have any sort...
    view full answer...
  • Trailer Jack Replacement for a Dalton Bolt-On 1.5K Swivel Jack
    Hey Tyson, thanks for reaching out! I recommend checking out the 1.5K etrailer Boat Trailer Jack w/ 2 Wheels # MJ-1500B-DWL which measures 12-5/8" from the center of the mounting bracket to the bottom of the wheels when retracted and 23" from those same spots when extended. I know you only measured the jack itself, but when looking for a replacement jack, you want to compare the amount of lift and height you get as opposed to the exact dimensions when it comes to the body of the jack. Let...
    view full answer...
  • Availability Of Dimensions For etrailer Boat Trailer Jack MJ-1500B-DWL
    Hello Scott, thanks for reaching out. I can provide dimensions for the etrailer Boat Trailer Jack # MJ-1500B-DWL but I am sorry to say we do not have a CAD drawing we can share. I will provide what dimensions we do have. Application: trailer frames 2" to 4" tall Lift capacity: 1,500 lbs Bracket height: Retracted: 12-5/8" Extended: 23" Screw travel : 10-3/8" Handle radius: 6-1/2" Inner tube diameter: 2" Outer tube diameter: 2-1/4" Dual-wheel dimensions: 5-3/4" diameter x 4" wide Is there...
    view full answer...
  • Will Boat Trailer Jack MJ-1500B-DWL Fit 2" x 2" Frame
    Hey Bob, Yes the etrailer Boat Trailer Jack w/ 2 Wheels # MJ-1500B-DWL will most certainly fit your 2" x 2" trailer frame without wobbling around. It fits frames up to 2" tall and you can tighten the clamps to the point you're going to get a nice, snug fit.
    view full answer...
  • Recommended Replacement for Shelby 1,000 Lb Boat Trailer Jack
    If the trailer is heavy, or the ground is uneven, it will be hard to move regardless of which jack you use but if the bearings are wearing out in the old one then a new one would surely take some strain off the user when moving. I recommend a dual wheel jack for increased stability, the Round Swivel Marine Jack w/ Dual Wheel part # MJ-1500B-DWL which can simply be bolted to the frame once the old jack bracket is cut off. It has a zinc coating so it will be great for marine applications....
    view full answer...
    Image 1 for
  • Using Trailer Jacks To Transport A Yakups Kayak Carrier
    Thank you for the picture. That kayak carrying device certainly does look cumbersome. Quite the interesting contraption. While generally we do not recommend modifying products like this, but I am happy to help if I can. With the bar being only 1" thick, the bolt on brackets we sell are not going to be sized correctly. I do agree that having it welded would be your best option. I would like to think that this crossmember piece will be strong enough to hold up the weight of the carrier...
    view full answer...
    Image 1 for Image 2 for
  • Where is the etrailer Swivel Jack # MJ-1500B-DWL Manufactured?
    While we do have some great U.S.A.-made boat trailer jacks, the etrailer Round Swivel Marine Jack # MJ-1500B-DWL is manufactured in China. However, for a super close U.S.A.-made model, I recommend the Dutton-Lainson Swivel Marine Jack # DL67MR. This jack comes with the same 1,500 pound weight capacity and a similar bracket heights of 13" (retracted) and 23" (extended). As far as compatibility, the jack fits trailer tongue heights up to 24-3/4" inches tall and square trailer tongues up...
    view full answer...
  • Trailer Jack with Wheels to Make it Easier to Move Around a Trailer by Hand
    Standard trailer jack wheels are either plastic or metal so there isn't a rubber tire available. But we do have the Trailer Valet # STC-V211 which is both a jack and a trailer mover rated up to 500 pounds tongue. You may also be able to use mount # DL22144 which holds a spare tire but can also use that spare tire to make it a dolly. The only problem would be turning since this is a fixed position carrier. Another option is to use a different jack that has dual wheels. That would make...
    view full answer...
  • 1995 Freedom Wheels Cobalt 220 Runabout Replacement Trailer Jack Recommendation
    Thank you for the photos! While it doesn't look like we have anything that mounts directly to your current mounting bracket, we do have some bolt-on replacement swivel jacks that will work perfectly for your application. For a single wheel replacement I recommend the Round Swivel Marine Jack w/ Wheel # MJ-1200B with 11" of travel and a 1,200 lb weight capacity, or for a dual wheel jack (for easy maneuverability) we have the Round Swivel Marine Jack w/ Dual Wheel # MJ-1500B-DWL which has...
    view full answer...
    Image 1 for Image 2 for Image 3 for Image 4 for
  • Who Manufactures etrailer Round/Wheeled Swivel Jack
    The # MJ-1500B-DWL is made in China. If you're looking for a USA made alternative I recommend the Dutton-Lainson # DL22580. This has a 12" lift, the same 1,500 lb capacity, and dual wheels. It uses a bolt-on installation and fits square tongues up to 3" x 5".
    view full answer...
  • Rebuild Kit for the RAM Round Swivel Marine Jack Part # MJ-1500B-DWL
    It sounds like you have the Round Swivel Marine Jack part # MJ-1500B-DWL which is the only 1,500 lb dual wheel, round trailer jack that I am aware of. If this is the case then you will want to use the Replacement Sidewind Handle part # MJ-1000B-HD and the Replacement Gear Kit for etrailer and Ram Round Swivel Marine Jacks part # MJ-1000B-GR. I have attached a rebuild video for you as well.
    view full answer...
  • Recommended Replacement Boat Trailer Jack
    Thank you for the pictures, I went through all of the jacks that we currently offer to find a matching bolt pattern and unfortunately was not able to find one with a 5-1/2" x 3" pattern. Looking at the pictures the bolt holes do look threaded but there's not enough space between the bracket and frame to add on a nut to fully secure the jack anyway. In my opinion the best solution here would be to angle grind the welds of the old bracket and remove it. You can then paint any exposed metal...
    view full answer...
  • Replacement For Handle "Bushing" on Etrailer Marine Jack
    For the etrailer # MJ-1500B-DWL Marine Trailer Jack, if the "bushing" you are referring to is a small fitting that has a 1/2" round hole on the inside and is square shaped on the outside to fit in the square hole in the jack tube, then you can use the Fulton # F0933301S00 Replacement Handle Kit which includes that part. That part is not available seperately. If you additionally need the replacement cap on top of the jack you can order the etrailer # MJ-1500B-CP cap. Annually you should...
    view full answer...
  • Dimensions and Diameter of the etrailer Round Swivel Marine Jack
    The etrailer Round Swivel Marine Jack w/ Dual Wheel - Bolt On - Zinc - Sidewind - 10-3/8" Travel - 1.5K item # MJ-1500B-DWL you were looking at has an inner tube diameter of 2". The outer tube diameter is 2-1/4". I have linked an installation and review video. I have also linked a diagram with other dimensions.
    view full answer...
    Image 1 for
  • Looking For Dual Wheel Jack With Low Retracted Height
    Hello Molly. As far as the dual wheel trailer jacks go, out best option for low retracted height is the Ark Xtreme Off-Road Swivel Trailer Jack # ORJW350D. This has a very sturdy dual wheel setup and the retracted height is only 9-1/2". The Ark jacks are super solid and easy to maneuver. Just Keep in mind that this jack has a lift capacity of 770 lbs so you will want to be sure that your trailer does not exceed this rating.
    view full answer...
  • Recommended Trailer Jack with Lower Retracted Height for Landscaping Trailer
    I looked through our selection trying to find a similar jack to the MaxxTow MT70149 with a retracted height less than 14-3/4 inches and found a couple of good options for you. You didn't say exactly what height you need, however part # MJ-1200B has a retracted height of 12-1/2 inches. The weight capacity is slightly less, at 1,200 pounds but that's probably still plenty for your trailer. It also offers 11 inches of travel which is a 1/2 inch less than the MaxxTow. A second option is...
    view full answer...


< Previous
12



Do you have a question about this Trailer Jack?


Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Cole B
Installed by:
Cole B
Employee Shane H
Installed by:
Shane H
Employee Ed W
Installed by:
Ed W
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Ronnie R
Updated by:
Ronnie R
Employee Mike S
Updated by:
Mike S
Employee Alex H
Updated by:
Alex H
Employee Ryan F
Updated by:
Ryan F
Employee Amanda M
Written by:
Amanda M
Employee Zach D
Video by:
Zach D
Employee Samuel H
Video by:
Samuel H

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.