Dimensions and Diameter of the etrailer Round Swivel Marine Jack

Question

Question:

What is the inside diameter of the jack. Is it a 2 tube?

asked by: Lester C

0

Expert Reply:

The etrailer Round Swivel Marine Jack w/ Dual Wheel - Bolt On - Zinc - Sidewind - 10-3/8" Travel - 1.5K item # MJ-1500B-DWL you were looking at has an inner tube diameter of 2". The outer tube diameter is 2-1/4". I have linked an installation and review video. I have also linked a diagram with other dimensions.

expert reply by: Jerred H

0

etrailer Round Swivel Jack Dimensions
(click to enlarge)

Answer 1

Good question A H, thanks for asking! The distance from the center of the mounting bracket to the top of the etrailer jack #MJ-1500B-DWL is 13-7/8 inches when the jack is fully retracted. The bracket height itself from the center of the bracket to…

view full answer...

Answer 2

Hi Ron! To get the 12v power port on your 7-Way working, you will want 12 gauge wire and a 40 amp circuit breaker (I have both listed below). This will get you needed power and protection for your Curt Echo Wireless Brake Controller #C51180. 12 Gauge…

view full answer...

Answer 3

Hey Kris, the Dutton Lainson winch part #DL15440 does not come with a strap so you will need to order one with it. The part #DL24250 will work great with this winch as it is correct width, is 25 feet in length, and has a capacity of 3,700 lb WLL and…

view full answer...

Answer 4

Hello Cole, Thanks for finally finding a reason to write into us, I see you have been a faithful etrailer neighbor (customer) since 2013. Unfortunately, the etrailer Boat Trailer Jack w/ Dual Wheel, Sidewind, Swivel, 10-3/8" Lift, 1,500 lbs…

view full answer...

Answer 5

Hey Christian, Yes, the TorkLift Tie Downs - Custom Frame Mount - Front and Rear #TL29DR will fit your 2016 Ram 2500 Crew Cab with running boards as long as you have a factory hitch receiver or no receiver at all. If your 2016 Ram 2500 Crew Cab with…

view full answer...

Answer 6

Hey Tyler! You can add the SnapPad! If you already have the etrailer Sidewind Trailer Jack - Swivel Bolt - 2K #e35YV, you can add the SnapPad using #SN47FR. That is a nice upgrade if you park on gravel, grass, dirt, or softer campsites and want a…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Brian! Yep, for your boat trailer, I’d skip the etrailer A-frame drill jack #e38AV since your trailer doesn't have that standard 3-bolt A-frame jack mount. That could be fabricated to fit, but that's a lot of unnecessary work. For a…

view full answer...

Dimensions and Diameter of the etrailer Round Swivel Marine Jack

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching