See what our Experts say about this Timken Trailer Bearings Races Seals Caps

• USA Made Bearing Kit that Fits 7k Axle of 2019 Grand Design 351M
  Hey Timothy, yes the Timken Bearing Kit part # TMK92VR is correct USA made bearing kit for a trailer with 7k axles like your 2019 Grand Design 351M.
  view full answer...
• Replacement Bearing Kit for a 2021 Jayco Jay Flight SLX 195RB
  Hey Scott, thanks for reaching out! The Timken Bearing Kit # TMK92VR you're looking at is for a 7K axle, and according to my research your 2021 Jayco Jay Flight SLX 195RB should be equipped with a 3.5K axle so we need to get you a different kit. For a 3.5K axle the Timken Bearing Kit # TMK52VR uses the standard bearings and seal, but it always helps to double check everything. This kit comes with the following parts: - Inner bearing L68149 - Outer bearing L44649 - Grease seal with...
  view full answer...
• Correct Bearing Kit for 2019 Jayco North Point 315RLTS
  Based on the GVWR of your 2019 Jayco North Point 315RLTS it does seem like you have 7k axles. I recommend verifying this information to be sure. These axles typically use the # 14125A outer and # 25580 inner bearing found in the Timken # TMK92VR. However, there are two different grease seal sizes used for this axle capacity so you will need to identify the correct grease seal before picking up a bearing kit. The # TMK92VR uses a 10-36 seal with a 2.250" inner diameter. If you find that...
  view full answer...
• Looking For Bearing Kit For 2017 Jayco Northpoint With Lippert 7K Axles
  Hello George. We will undoubtedly have a bearing kit for the 7K Lippert your 2017 Jayco North Point 5th wheel. That said, I do not have a way to tell you the exact seal size based on the info you provided. The best way to find this out will be to remove one of the hubs and measure the ID of the seal with a caliper. It seems like the 2.250 ID seals are a bit more common, but both sizes are out there. A lot of times what I recommend folks do is just get the bearing kit like part # TMK92VR...
  view full answer...
• Looking For Wheel Bearings And Races For A 1992 Layton 1850 EL Travel Trailer
  Hello Jarold, thanks for reaching out. Without any numbers on the bearings, it is going to be tricky because there is no way to look up a year and model of trailer to know the bearing sizes. If you know the axle weight capacity, that will help to narrow things down. The best thing to do will be to take a digital caliper to each bearing. Measure the inner diameter of each bearing, and the inner diameter of each race. If you can provide me with that info, I am happy to look into it and see...
  view full answer...
• Replacement Bearings And Grease Seals For A 2020 Keystone Bullet 248RKS Travel Trailer
  Hi Scot, To find the correct bearings and grease seals for your 2020 Keystone Bullet 248RKS Travel Trailer you'll need to either check them to see if the part number is still stamped onto them or measure the spindle with a caliper # PTW80157 at points B, C, and D for the inner diameter and the hub bore hole for the outer diameter. Once we have either the part numbers or measurements I can see which Timken bearings will be a compatible fit.
  view full answer...
• Trailer Bearing Kit for 2021 Forest River 29VBUD Camper
  For a Lippert 4,400 lbs axle you will need the Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles item # BK2-100. The kits for the 3,500 lbs axles fit the 4,400 lbs.
  view full answer...
• Availability of Timken Bearings for Dexter 7k Axle
  Hey Roger! Assuming your hub uses the standard 7k bearings we have the Timken 14125A # TMK54FR and Timken 25580 # TMK44FR. If you have the original Dexter hubs on there it is safe to assume these are correct. If you're looking for a full bearing kit you will need to figure out if your grease seal has a 2.125" or 2.25" inner diameter. The # TMK32VR is the 2.125" and the # TMK92VR is the 2.25" kit. If you aren't sure I can use the S/N off your axle tag to identify it just let me know below.
  view full answer...