Replacement Bearing Kit for a 2021 Jayco Jay Flight SLX 195RB
Updated 02/05/2025 | Published 01/31/2025
Products Featured in This Question
Question:
Will this kit work on a 2021 jayco jay flight slx 195rb
asked by: Scott
(click to enlarge)
Expert Reply:
Hey Scott, thanks for reaching out!
The Timken Bearing Kit # TMK92VR you're looking at is for a 7K axle, and according to my research your 2021 Jayco Jay Flight SLX 195RB should be equipped with a 3.5K axle so we need to get you a different kit.
For a 3.5K axle the Timken Bearing Kit # TMK52VR uses the standard bearings and seal, but it always helps to double check everything. This kit comes with the following parts:
- Inner bearing L68149
- Outer bearing L44649
- Grease seal with 1.719" ID
As long as all of this matches up you'll be good to go! Be sure to get two of these as there are only enough parts for 1 hub.
Are you trying to get your camper back up and running, or just wanting to have some extras on hand just in case?
Product Page this Question was Asked From
Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Standard Bearings
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- Timken
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: equalizer
- Search Results: tandem axle equalizer
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Who Makes Dexter Trailer Axle Bearing?
- Search Results: trailer bearings races seals caps
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Search Results: 68149
- Search Results: bearing set
- Search Results: l44649
- Search Results: bearing kit
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Shop: Lippert Complete Bearing Kit for 3.5K Trailer Axles - L44649/L68149 Bearings, L44610/L68111 Races
- Article: How to Raise Your Travel Trailer Height
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Shop: Dexter Equalizer w/ Nylatron Bushings for 1-3/4" Wide Double-Eye Springs - 6" Long
- Q&A: What is the Difference Between the MORryde CRE3000 and AllTrek 4000 Suspension Kits
- Video: A Closer Look at the Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles
- Q&A: Can I Use 4,000 lbs Springs to Replace 3,500 lbs Leaf Springs?
- Q&A: Recommended Torque Specs for the CE Smith U-Bolt Kit CE23002
- Video: Dexter Heavy Duty Suspension Upgrade Kit Installation - 2021 Grand Design Imagine Travel Trailer
- Video: Complete Breakdown of the Dexter Trailer Springs Over-Under Conversion Kit
- Q&A: Replacement For Dexter EZ Lube 85-1 Grease Caps
- Video: Review of Power Mountain Automotive Tools - Tallboy 2 Tons Off Road Bottle Jack - PM44FR
- Q&A: Recommended Upgraded Leaf Springs for a 2022 Grand Design 2400BH
- Q&A: Should I Replace the U-bolts When Replacing the Leaf Springs
- Video: All About the CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles
- Video: Let’s Check Out the CE Smith U-Bolt Kit for Mounting Round Trailer Axles
- Article: Trailer Wiring Diagrams
- Video: Timken Bearing Kit Step-By-Step Replacement - Utility Trailer
Scott
2/5/2025
Doing maintenance on the camper before camping season thank you for your help.