Timken Bearing Kit For 2024 Brinkley 3110 With 7k Axle
Updated 08/07/2025 | Published 07/02/2025
Question:
Trying to identify the correct Timken bearing kit for my 2024 Brinkley 3110 with a 7000 lb axle
asked by: David M
Expert Reply:
Hi David!
From what I could find about your 2024 Brinkley 3110, the 7k axle you have is a Lippert. This does make thing easier as they tend to use the 14125A and 25580 bearing combination for this axle. However, I am always a little nervous about just saying that is correct as it has come back to bite me in the backside before. The Timken Bearing Kit, 14125A / 25580 Bearings, 14276/25520 Races, 10-36 Seal # TMK92VR is most likely the correct one, but I very highly recommend either pulling off one the hubs and checking to make sure they are indeed correct, or contacting Brinkley with your VIN.
What has been your favorite place to take your camper? That things looks pretty sweet. : )
(click to enlarge)
Product Page this Question was Asked From
Timken Bearing Kit, 14125A / 25580 Bearings, 14276/25520 Races, 10-36 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Standard Bearings
- Bearing 14125A and 25580
- Race 25520 and 14276
- 7000 lbs Axle
- Timken
more information >
Continue Researching
- Q&A: Looking For Bearing Kit For 2017 Jayco Northpoint With Lippert 7K Axles
- Shop: Replacement Wet Shoulder Bolt - MORryde Suspension Upgrade Kits - 9/16" x 2-15/16" - Qty 1
- Shop: Replacement Shackle Link with Bolts for Dexter Trailer Suspension Kits
- Shop: Timken Bearing Kit, 14125A/25580 Bearings, 14276/25520 Races, GS-2125DL Seal
- Shop: Timken Bearing Kit, 14125A / 25580 Bearings, 14276/25520 Races, 10-36 Seal
- Shop: Bronze Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long - Qty 1
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track - 2-1/4" Shackle Straps
- Shop: Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
- Shop: Fifth Wheel Hitch
- Article: Most Popular Wheel Bearings
- Q&A: USA Made Bearing Kit that Fits 7k Axle of 2019 Grand Design 351M
- Q&A: Replacement Bearings For A 6,000 Pound Dexter Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Q&A: What Brand are the BK3-200 Bearing Kits
- Q&A: Correct Gen-Y Gooseneck Pin Box for a Brinkley 5th Wheel Trailer
- Q&A: Do I Have to Use Timken Races with Timken Bearings, or can I Use Mine that were Made in China?
- Q&A: Gen-Y Gooseneck Adapter Pin Box to Replace Lippert Rhino on a 2025 Jayco Seismic 399
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Gooseneck to 5th Wheel Adapters
Lazer S.
8/7/2025
Hey David, Did you get a chance to check if the Timken Bearing Kit was the right fit for your Brinkley 3110? I'm curious to know how it worked out for you, and I'm here to help if you need any more assistance!