See what our Experts say about this Optronics Accessories and Parts

• Single Plug and Wire for Thinline LED Clearance and Side Marker Light
  Hey Eric! The single wire for the Thinline LED Clearance and Side Marker Light # AL91RB is the # A91LW. If you need the self-grounding mounting bracket it is # A91BB for black or # A91CB for chrome. Don't hesitate to reply below if you need anything else.
  view full answer...
• Surface Mounting Bracket For Custer LED Side Marker/Clearance Light CPL26-A
  Hi Adam! We do have another option that will fit the exact same way, but I am sad to say the Custer bracket is no longer available. The Custer LED Side Marker or Clearance Trailer Light # CPL26-A snaps into the Optronics bracket # A91CB perfectly (almost too perfectly as it took a slot screwdriver and some patience to get it out when I test fit them together). Unfortunately, it does only come in silvery chrome finished plastic, but it could very easily be rattle canned to whatever color...
  view full answer...
• Replacement Amber Mini Trailer Clearance Light For Wesbar 3395
  We have just what you are looking for. The replacement clearance light we offer is the Optronics Mini Rectangular Clearance Light, part # A91AB. This is an amber light that measures 2-1/2 inches long x 1-3/16 inches wide x 7/8 inch deep. This light requires the # A91LW pigtail to complete the wiring and a mounting bracket. The bracket is available in black, part # A91BB. For a chrome finish, use # A91CB.
  view full answer...
• Replacement Wiring Needed for a 6 x 10 foot Trailer
  We don't actually manufacture our wiring harnesses, but we do have some options available for you. You can use the Wesbar Wiring Harness # 002220 to replace the wiring on your 6 x 10 aluminum trailer. To complete the installation you will only need a Ring Terminal # DW05702-1 and Butt Connectors, part # DW05744-5 for 5 or part # DW05744-10 for 10. Just simply splice in the lights that you have into the wiring. If you don't already have lights then you can use the Trailer Light Kit #...
  view full answer...
• Replacement 2-1/2 x 1-1/4 Inch Amber and Red Trailer Clearance Lights and Chrome Base
  Based on your picture it looks like you are in need of some replacement lights and a bracket. It looks like you will need amber light # A91AB, red light # A91RB, and bracket # A91CB. And if you need the single wire (since the lights will ground through the bracket and mounting hardware) use # A91LW.
  view full answer...
  
• Will LED Clearance Light Work With One Wire
  Yes, the Thinline LED Clearance and Side Marker Light - Submersible # AL91AB will work with your single power wire, as it uses a 2-wire (one for power, one for ground) pigtail or 1-wire pigtail with a self-grounding bracket. To mount this light you have a couple options. The first is the Mounting Bracket # A91BOB with Right Angle 2-Wire Pigtail # A46PB; you'd also want to use the Self-Tapping Screw # 1131832. Your other option to mount this light is to use Self-Grounding Mounting Bracket...
  view full answer...
  
• Are Mounting Brackets Needed To Install Optronics LED Trailer Clearance Lights # AL91RB
  For installation of the Optronics LED Trailer Clearance Lights, part # AL91RB, you will need to use an Optronics Mounting Bracket. You can use either the Optronics Black Mounting Bracket, part # A91BB, or the Chrome Mounting Bracket, part # A91CB. The brackets are sold individually, so you will just need to order the same quantity as the number of lights you have. I have linked a video that show the installation of the Optronics AL91 Series Lights.
  view full answer...
• Looking for LED Version of # AL91RB Mini Rectangular Clearance/Side Marker Lamp
  You bet we do! For the LED version, you'll need part # AL91RB. The lamp can be grommet mounted using # A91GB or surface mounted using a self grounding base like # A91BB for black/ # A91CB for chrome or a standard base like part # A91BOB for black/ # A91OB for chrome. If you use a self grounding base, use the single wire pigtail, part # A91LW or for the standard base, use the two wire pigtail, part # A49PB.
  view full answer...
• Are Clearance Lights Needed on a Snowmobile Trailer
  To equip your snowmobile trailer with a basic lighting setup, you would need amber front side marker lights and red rear side marker lights. A basic trailer would require a minimum of two each, with the front lights as far forward as possible and the rear lights as far back as possible. The # TLK36RK trailer light kit includes the required amber front marker lights , but you could also add matching red clearance lights # A91RB with chrome bases # A91CB. I would also recommend using...
  view full answer...
• Wiring Pigtail and Mounting Bracket Options For Installing Thinline LED Clearance And Marker Lights
  The Thinline LED Clearance and Side Marker Light # AL91AB require certain mounting brackets and plugs that are either already installed on the trailer or are available separately. A Right Angle 2-Wire Pigtail # A46PB will work with the Grommet # A91GB if you are looking to recess the light. Or Mount Brackets # A91OB and # A91BOB if you want to mount them on a surface with the wiring running behind the bracket. The Plug - Single Wire # A91LW is used for Mounting Brackets # A91BB and...
  view full answer...
• Looking for Boat Trailer Clearance Light to Replace Signal Stat 1500
  According to my Optronics representative, the # AL91RB marker/clearance light you mentioned is a direct replacement for the Truck-Lite 15 series. The Signal Stat 1500 is how Truck-Lite refers to the same lamp in its LED version. A mounting bezel is available, part # A91BB for black or # A91CB for chrome plated ABS. If either one of these self-grounding bezels is used, use a # A91LW pigtail. If a non grounding bezel or bracket is used, a two wire pigtail like part # A46PB would be needed.
  view full answer...
• Options to Mount Optronics A91 and AL91 Series Lights
  The grommet # A91GB is inserted into a hole in your trailer. For a bracket to mount to the trailer you can use # A91BB, in black, or # A91CB, in chrome.
  view full answer...
• Brackets and Wiring for Sealed, Miro Flex, Mini Thin Line LED Marker or Clearance Light # AL191AB
  We do have the parts you need to complete installation of the light. But first, sealed, Miro Flex, Mini Thin Line LED Marker or Clearance Light # AL191AB does not include a base or wiring harness. We have the compatible bases listed as related products on the right hand side of its product page. There is flush mount grommet, # A91GB Self-grounding black bracket, # A91BB Black bracket with open back, # A91BOB Chrome bracket with open back, # A91OB Self-ground chrome bracket, # A91CB For...
  view full answer...
• How Does Clearance Light Included with Trailer Light Kit part # TL16RK Wire to Trailer
  The clearance lights of the # TL16RK are the part # A91AB with the bracket part # A91CB. The assembly grounds through the mounting hardware and the single wire part # A91LW that comes with it runs to the running light circuit of the trailer like you mentioned.
  view full answer...
• Is There A Grommet Available To Go With The Optronics Dragons Eye LED Lights
  You are correct in that Optronics does not make a gasket to go with their line of dragons eye LED lights. If you are wanting marker lights with a grommet or gasket we do have the Optronics micro flex LEDs # AL191AB in amber and # AL191RB in red. These can be brackets that come in either black # A91BB or chrome # A91CB.
  view full answer...
• Parts Needed to Install Optronics Submersible Red LED Clearance and Side Marker Light AL91RB
  The Optronics Thinline Submersible Red LED Clearance and Side Marker Light # AL91RB installs using a base, part # A91BOB in black or part # A91OB in chrome finish. A 2-wire pigtail # A46PB will allow for electrical installation. The white wire on the pigtail is ground. If your original light used only 1 wire then its base provided the ground connection. In this case you can use the self-grounding base # A91BB in black or # A91CB in chrome finish. In this case you will use Single Wire #...
  view full answer...
• What Wiring and Accessories are Needed For Side Marker Trailer Light # A91AB
  The Sealed, Mini Rectangular Trailer Clearance and Side Marker Light, # A91AB, requires a pigtail and a mounting bracket. The pigtail is # A91LW. I have included a link to a video showing a typical installation for you. For a bracket, there are a couple of options. For black, use # A91BB. For a chrome finish, use # A91CB.
  view full answer...
• Mounting Hardware for Optronics Mounting Bracket
  The Optronics Mounting Bracket # A91CB grounds through the mounting hardware. So whatever hardware you use, whether screws or pop rivets, make sure it's made of a conductive metal. The hardware we generally recommend is self-tapping screws # 1131832 but pop rivets should work just fine.
  view full answer...
• Red Optronics Clearance Light Needed and Matching Chrome Mounting Bracket
  The Red version of the Sealed, Mini Rectangular LED Trailer Clearance, Side Marker Light # AL91CAB from Optronics is found as part # AL91RB on our site. The Chrome mounting bracket for both lights is part # A91CB and works with 90 Series or 91 Series Optronics lights.
  view full answer...
• Could Optronics Amber LED Trailer Turn Signals be Used as Motorcycle Turn Signals
  The Optronics Trailer Light # AL191AB that you referenced would make an excellent turn signal for your motorcycle. The LED diodes are very bright and should provide you with very visible turn signal. The chrome bezel to go along with it would be the Chrome Mounting Bracket # A91CB. This product would normally ground through the mounting bolts, but since you would be mounting this in a fiberglass bag you would need to ground it using an Optronics Single Wire Ground # A91LW. I attached...
  view full answer...

Do you have a question about this Accessories and Part?