Replacement Grease Seal for 2024 Keystone 5th Wheel With Dexter D60 Axle

Question

Question:

What grease seals do I need for my 2024 Keystone 5th wheel I have a pic of the tag on the axle Dexter D60 dex1550135 SN 132420074009

asked by: Derek C

0

Expert Reply:

Hey Derek, welcome back! Thank you for providing that information from your axle tag. Your 2024 Keystone uses # 10-36 grease seals with a 2.25" inner diameter. You can use # RG06-070 for a pair or if you want a full bearing kit you can choose from the following:

-etrailer Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal # BK3-200

-Dexter Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal # DX58ER

-Timken Bearing Kit, 14125A / 25580 Bearings, 10-36 Seal # TMK92VR

Where are you headed once you get your grease seals replaced?

expert reply by: Robin H

0

Dexter Bearing Kit
(click to enlarge)

Answer 1

Hi David! From what I could find about your 2024 Brinkley 3110, the 7k axle you have is a Lippert. This does make thing easier as they tend to use the 14125A and 25580 bearing combination for this axle. However, I am always a little nervous about…

view full answer...

Answer 2

I didn't receive a picture which you can email to me directly if you would like. However, since you have a Dexter D60 axle you will need the Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal item #BK3-200 you were looking at.

view full answer...

Answer 3

Hi William! Thanks for the picture of your axle tag. The correct bearing kit is the #BK3-200 with a 10-36 grease seal. If you want the Dexter version it is the #DX58ER, Are you getting your Momentum ready for spring/summer? Any big trips coming up?

view full answer...

Answer 4

Hey Donny! For your Dometic Penguin/Brisk Air 15,000 BTU AC model B59516.711C0-MX, the correct soft start is the #DMC93JF. This is designed for Dometic Brisk II electronic air conditioner units with in-wall thermostats.

view full answer...

Answer 5

Hey Kenneth, thanks for reaching out. Yep, it is! The Dexter bearing Kit #DX58ER is exactly what you need for the 7K axles on your 2022 Alliance Paradigm 340RL. That gets you both bearings, matching races, your seal, tang washer and cotter pin. You…

view full answer...

Answer 6

It sure is Adam. Your 2024 Brinkley Model G3950 comes with three 7,000 lbs Dexter heavy-duty axles. The Dexter Bearing Kit item #DX58ER is the correct one. This kit is sold per hub and includes new bearings, races, a seal, a tang washer, and a cotter…

view full answer...

Answer 7

To Don, Thanks for providing your information! According to my research you need the Bearing Kit #BK3-200 for your 7K Dexter Axles 651773. Are you needing to actively replace your bearing parts, or just looking to have something on hand just in…

view full answer...

Answer 8

Hey Alan, thanks for the information! Since you have 7k Dexter axles, you'll need the Dexter Bearing Kit item #DX58ER. This kit has both inner and outer bearings, matching races, a 2.250" grease seal, tang washer, and cotter pin. These kits…

view full answer...

Answer 9

Hey Mordechai! I can help you find replacement leaf springs and shackles but you will have to get some measurements. For the leaf springs you either need to measure the flat length or get the spring eye to spring eye measurement. Both of these are…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Replacement Grease Seal for 2024 Keystone 5th Wheel With Dexter D60 Axle

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching