See what our Experts say about this Redline Trailer Bearings Races Seals Caps

• Will Redline Grease Seal # 1105-100-031 Replace Hadco 3122 Grease Seal
  We may have a grease seal that will work in your application however, my research had conflicting measurements for the Hadco 3122 that you referenced. I contacted my technical contact at Redline to verify that the Redline Grease Seal # 1105-100-031 that you referenced was a direct replacement, but they could not confirm this information. In order to choose the correct grease seal to replace your Hadco 3122 a couple of measurements with a digital caliper are needed. The first measurement...
  view full answer...
  
• Possible Replacement Grease Seal for Hadco 3122
  The grease seal you mentioned could work but the dimensions you mentioned are only carried out to the tenth but we'd need the dimension carried out to the hundredth. So you'd want to use a digital caliper like part # PTW80157 to verify if the # 1105-100-031 would fit. This has ID of 1.750 and an OD of 2.356 inch.
  view full answer...
• Replacement Grease Seal # 3077 With 2.56-Inch Outer Diameter and 1.74-Inch Inner Diameter
  Thank you for providing the original grease seal number that you wish to replace, part # 3077. This is usually the best way to find a replacement. Unfortunately, we have no cross reference for this part number. The other route to find a replacement grease seal is to take measurements as you did - thank you. The trouble with taking measurements of a grease seal is that normal wear (and the process of removing the old seal) can often alter its dimensions. Seal dimensions are taken to the...
  view full answer...
• How to Pick Out Replacement Grease Seals for Hadco 3122
  We may have a grease seal that will work in your application however, my research had conflicting measurements for the Hadco 3122 that you referenced. I contacted my technical contact at Redline to verify that the Redline Grease Seal # 1105-100-031 that you referenced was a direct replacement, but they could not confirm this information. In order to choose the correct grease seal to replace your Hadco 3122 a couple of measurements with a digital caliper are needed. The first measurement...
  view full answer...
  
• Hadco 3077 Grease Seal Replacement Recommendation
  Your Hadco 3077 grease seal should have an outer diameter of 2.56 inches and an inner diameter close to 1.74 inches. Based on that the seal part # 168255TB should be a fit. The outer diameter is 2.561 inches and the inner diameter is 1.687 inches. You will want to double check these dimensions with your current seal to determine if this will fit. Since inner diameter on seals can be hard to nail down you might want to measure the outer diameter of the spindle where the seal rides.
  view full answer...
• Replacement Bearing Race and Grease Seal For Trailer Hub
  We do offer the replacement trailer bearing # L68149 which has 1.378 inch I.D., replacement race # L68110 which has a 2.327 inch O.D., and Grease Seal # 1105-100-031 which is a single lip version of the grease seal you have currently with a 2.356 O.D. and a 1.750 I.D. At this time we do not carry the replacement LM12749 bearing, or replacement LM12710 race for your trailer.
  view full answer...
• Grease Seal with 1.750 Inner Diameter and 2.445 Outer Diameter
  The closest grease seal we have available to the dimensions you listed is the Redline # 1105-100-031, which has a matching 1.750 inch inner diameter but a slightly smaller 2.356 inch outer diameter. I wasn't able to cross-reference the A16817 part number you found with an available grease seal. Since the outer diameter is pretty close, I just recommend measuring once more (being sure to use a digital caliper like # PTW80157) for verification.
  view full answer...
• Replacement Bearings and Seals for Agricultural Hub
  Unfortunately we don't have a hub replacement available as you have an odd sized Agricultural Hub. However, I believe I can help you with bearing replacements. You will want # 14125A and # LM11949 for your bearings. The for your seal, you will need to determine fit based on the outer diameter of your hubs. We have the # 10-42 which has an outer diameter or 2.33 inches, # SL175 with 2.722 inches, or # 1105-100-031 with 2.356 inches.
  view full answer...
• Grease Seal Recommendation for an Old Boat Trailer
  It sounds like the Grease Seal # 1105-100-031 that you referenced would be the correct seal for you. This seal has the same inner and outer dimensions your seal has. This seal has a inner dimension of 1.750 and an outer dimension of 2.35.
  view full answer...
• Grease Seal Recommendation with OD 2.351 inches and ID 1.712 inches
  Based on the dimensions you listed, the Grease Seal part # 1105-100-031 would be the correct seal for a replacement.
  view full answer...

Do you have a question about this Trailer Bearings Races Seals Cap?