Hadco 3077 Grease Seal Replacement Recommendation
Published 10/29/2015
Products Featured in This Question
Question:
I too have a trailer with Hadco 3077 bearing seals. It was a utility trailer and is converted to a drift boat trailer. Any recomendations for a replacement? Thanks,
asked by: Kerry H
Expert Reply:
Your Hadco 3077 grease seal should have an outer diameter of 2.56 inches and an inner diameter close to 1.74 inches.
Based on that the seal part # 168255TB should be a fit. The outer diameter is 2.561 inches and the inner diameter is 1.687 inches.
You will want to double check these dimensions with your current seal to determine if this will fit. Since inner diameter on seals can be hard to nail down you might want to measure the outer diameter of the spindle where the seal rides.
Product Page this Question was Asked From
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Single Lip
- 1.75 Inch I.D.
- 2.36 Inch O.D.
- Redline
more information >
Continue Researching
- Shop: Double Lip Seal for 3,700-lb Marine Hubs
- Search Results: magnet
- Search Results: trailer breakaway kit
- Shop: Brake Controller
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Grease Seal
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Video: Feature Review Rubber Flexible Edge Trim for RVs
- Search Results: trailer brake controller
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Q&A: Replacement Hubs for Hadco Eng 440 Hubs
- Search Results: m12649
- Search Results: timken
- Shop: Lippert Grease Seals - Double Lip - ID 1.719" / OD 2.565" for 3,500-lb to 4,400-lb Axles
- Shop: Lippert Grease Seals - Double Lip - ID 2.25" / OD 3.376" for 5,200-lb to 8,000-lb Axles
- Search Results: hadco
- Video: Installing the Dexter Double Lip Seal for 3,700-lb Marine Hubs
- Search Results: rubber molding
- Video: All You Need to Know About the Double Lip Seal for 3,700-lb Marine Hubs
- Shop: Trailer Wiring
- Q&A: Replacement Grease Seal # 3077 With 2.56-Inch Outer Diameter and 1.74-Inch Inner Diameter
- Video: Hands-On with the CE Smith Trailer Suspension Shackle Straps
- Article: Testing Breakaway Systems
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles Spec Review
- Video: Comprehensive Review: 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles
- Q&A: Will the Electric Trailer Brake Kit - 10" - 3,500 lbs Work with Hadco 440 Hubs
- Q&A: Replacement for Hadco 10" x 2" Electric Brakes
- Shop: BOLT brand vehicle and hitch locks
- Video: Hands-On with the etrailer Hub Bearing Kit