Kenda 215/60-8 Bias Trailer Tire with 8" White Wheel - 5 on 4-1/2 - Load Range C

Ask the Experts about this Kenda Trailer Tires and Wheels

• What Does Ply Rating Mean on ST Trailer Tires?
  The ply rating has to do with the thickness of the tire and the load capacity will increase based on the ply rating. The information below tells you the ply rating and general load pressure (in psi units) determined by the manufacturer testing: Load Range B: 4 Ply Rating, ~35 psi Load Range C: 6 Ply Rating, ~50 psi Load Range D: 8 Ply Rating, ~65 psi Load Range E: 10 Ply Rating, ~80 psi Load Range F: 12 Ply Rating, ~95 to 110 psi Load Range G: 14 Ply Rating, ~110 psi The Kenda...
  view full answer...
• Are Radial Trailer Tires a Better Choice for Small Cargo Trailer
  The # AM31199DX wheel/tire combo you referenced would be a great choice for you. The radial tires will give you a much better highway ride, and because radial tires typically run cooler you'll likely get longer life out of them. The tires will have plenty of capacity for the load you're carrying, and since the tire's diameter is right about the same as the existing tires you're using, you won't have any clearance problems. I've linked you to one of our help articles that contains more...
  view full answer...
• Is 18.5x8.5x8 The Same Tire Size As 18.5x8.5 5 on 4-1/2 Listed On Tire and Wheel, # AM3H310
  The Kenda Trailer Tire and Wheel, # AM3H310, has a 18.3 inches diameter and a 8.9 inches overall width on the 8 inch tire. That is the same measurement you have on your tire. So that will be the right tire for your trailer. The tire is also listed on the tire as being a 215/60-8, which is the new metric sizing for that tire size. Our part number also lists the wheel bolt pattern, which is 5 on 4-1/2 inches. Most trailer tires that are smaller than 15 inches and have 5 bolts, have...
  view full answer...
• Wheel and Tire Replacement Recommendation for Tritan Clam Shell Trailer
  For an exact match for the wheel and tire you have now we have the part # AM89992 which has a bolt pattern of 5 on 4-1/2 inches and comes with a tire size 18x8.50-8 mounted on it.
  view full answer...
• Smallest Radial Tire For A Snowmobile Trailer Application
  The smallest radial tire we have is a 12 inch tire. I've done the calculations with the tire on a 12 inch rim and you'd be looking at a little over 21 inches diameter with # AM31199DX. The load rating would right around 1220 at 65 psi with a load rating of D. You would be limited by your axle and not the tire if you are able to fit this large a tire when loaded. The radial tires will run cooler on your long drives.
  view full answer...
• Availability of Hub/Drum that Fits 8 inch Wheel for Adding Brakes to Axle
  We have the hub and drum part # AKHD-545-2-EZ-2K that is compatible with 8 inch trailer wheels like the Kenda 215/60-8 Bias Trailer Tire with 8" White Wheel # AM3H310 that you referenced and has the correct bolt pattern of 5 on 4-1/2 inch like this wheel needs as well. This hub is the correct fit for 2,000 lb axles which are pretty common. Then for brake assemblies you'd want the part # AKEBRK-2 which is designed for the hub I mentioned as well.
  view full answer...
• Replacement Trailer Tire Options for 215/60-8 Trailer Tires
  Tire size 215/60-8 is the size you will need to be looking at. You will also want to make sure you get the same load range. Tire size 215/60-8 comes in three load ranges, B has the lowest capacity, C is in the middle, and D has the highest. Load range will be indicated in a block of information on the tire side wall after the tire size. Having a higher capacity does not increase the capacity of the trailer. I have included a link to all of the tires and tire and wheel combos that we...
  view full answer...
• ST145/80-12 Tire Recommendation Over a 4.80-12
  The two tire sizes are similar, but the 145/80-12 will be a bit taller at 21.3 inches vs. the 4.80-12 which has a diameter of 20.5 inches. Aside from that they are very similar and both fit 12 inch diameter rims that are 4 inches wide. The radial part # AM10140 that is a ST145/80R12 would be what I recommend as it would have plenty of capacity and is a radial which is preferred over bias-ply construction like what all of the 4.80-12 tires are made of. A radial tire flexes more than...
  view full answer...
• What is the Speed Rating for the Kenda 215/60-8 Bias Trailer Tire with 8" White Wheel AM3H310
  Nearly all trailer tires are limited at 65 miles per hour as the max speed they go. If you exceed this rating the tire can build excessive heat and fail. I attached a review video for this wheel/tire as well as a help article on trailer tires for you to check out as well.
  view full answer...
• 8 inch Wide Trailer Fenders for Trailer Wheel and Tire Size 215/60-8
  The wheel and tire in the size of 215/60-8 that you referenced like part # AM3H310 are 8 inches wide. For a fender that would be wide enough you would need to go with one like the part # CE17800G which is setup for larger 12 inch wheels. The size of this fender is 27-3/8" Long x 8" wide x 11" tall. So it will be a bit large but it will work. I attached a review video for this fender for you to check out as well.
  view full answer...
• Common 5 Bolt Patterns for Trailer Wheels
  The most common 5 bolt pattern is 5 on 4-1/2. However, 5 bolt patterns also come 5 on 4-3/4, 5 on 5, and 5 on 5-1/2. It is important to know the bolt pattern before you buy new wheels to ensure a proper fit. I have attached an article on how to determine the bolt pattern of your wheel for you.
  view full answer...
• What Causes Trailer Tires to Cup
  What you describe is called 'cupping', where the tire looks like something's been taking bites out of it. Usually cupping on a tire is caused by the tire bouncing on the road, which can have many causes. Check the air pressure in your trailer tires. A trailer tire should be kept inflated to the maximum air pressure listed on the tire sidewall. Also make sure the weight rating of your tires is not being exceeded. Having one or more wheel/tires out of balance could also be causing the...
  view full answer...
• Difference Between Bias Ply And Radial Ply Trailer Tires And What Does Load Range Mean
  The main difference between bias ply and radial ply tire is how the tire is constructed. The cords underneath the tire are run in different directions. On a bias tire, the cords run at a 32 degree angle from the direction of travel and on a radial tire, the cords will run at 90 degrees from direction of travel, or across the tire from wheel lip to wheel lip. Because of the construction of a radial tire, the tire has more flex and will allow for more ground contact. That will improve...
  view full answer...
• Should I Run Lower PSI In My Trailer Tires When Towing An Empty Trailer With My 1993 Jeep YJ
  You always want to have the tires on your trailer inflated to the maximum tire pressure as specified on the tire. If you run the trailer tires at a lower PSI, the thicker sidewall of the trailer tires would cause the tires to heat up quicker and would reduce the life of the tires. I have linked an FAQ on trailer tires that you may find as a useful reference.
  view full answer...
• Recommended Replacement Tire Size 225/75R15 for Motorcycle Trailer
  For a tire in the same size suitable for highway use for a trailer I would recommend the part # TTWTRTM2257515D as this is a radial tire. This is a load range D tire which means it's an 8 ply rating, has a maximum load capacity of 2,540 pounds at 65 psi. A radial tire flexes more than a bias tire, giving it better ground contact, traction, stability, and tread wear. A radial tire will normally run cooler than a bias ply tire, especially when the tire is under a load. A tire that runs...
  view full answer...
• Tread Depth of the Tire on Kenda 215/60-8 Bias Trailer Tire with 8" White Wheel # AM3H310
  I went out into our warehouse and measured the tread depth of the tire on the Kenda 215/60-8 Bias Trailer Tire with 8" White Wheel # AM3H310 and found it to be 1/4 of an inch.
  view full answer...
• Highest Rated 16 inch Trailer Tire Recommendation
  It sounds like you are looking for 235/85-16 tires in a high capacity since 285 isn't a typical trailer tire series. The highest rated tire we offer in that size would be the Karrier ST235-85R16 part # AM10501 that has a 3,960 lbs at 110 psi capacity. You should note that trailer tires should always be inflated to their max PSI to ensure their capacity and prevent heat build up.
  view full answer...
• Weight Rating on Combination Tire and Wheels for Trailer
  When a tire and wheel like the Kenda 215/60-8 Bias Trailer Tire with 8" White Wheel # AM3H310 are rated for max capacity of 935 lbs at 50 psi, then each axle will be able to carry 1870 lbs unless the axle capacity is less than the rated wheel and tire capacity. Whatever is the weakest component in your system (whether axle, springs, hubs, tires, or wheels) that weakest component's rating becomes your max capacity. Let me know if you have further questions.
  view full answer...
• Availability of Tire Size 215/60-8 on Wheel with 4 on 4 inch Bolt Pattern
  We have two options for a Loadstar 215/60-8 Load Range C on a 4 on 4 inch bolt pattern. First is the # AM3H290 which has a white wheel and the part # AM3H300 which is on a galvanized steel wheel.
  view full answer...
• Adding 7 Inch Electric Trailer Brakes to Trailer With Idler Hubs
  If your existing hubs use a L44649 bearing with an ID of 1.063, we have a solution for you. You'll want to measure the ID of your existing bearings to confirm. A digital caliper like # PTW80157 is an easy way to get an accurate measurement of your bearing's inner diameter. If your existing hubs use the L44649 bearings, you can use the Dexter # 8-173-16UC3 which is compatible with a standard spindle or # 8-173-16UC3-EZ compatible with an EZ lube spindle. For a brake assembly, use #...
  view full answer...
• Offset of 215/60-8 Tires and Wheel Combination
  Harbor Freight trailers have a bolt pattern of 4x101.6 (or 4 on 4 inch) or the 5 on 4-1/2 inch if you have 5 lugs. . The 225 x 8 isn't a size we carry, but we do have the Kenda 215/60-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range C # AM3H290 which have a zero offset. This will give you 4.45 inches of backspacing since the tires are 8.9 inches wide. The same is true of the 5 lug wheel and tire # AM3H310.
  view full answer...
• Tire/Wheel to Repalce 20.5 x 8.0-10 Tires on Older Coleman Pop-Up Camper
  A 215/60-8 tire like # AM3H310 would have a tread width of about 9 inches and an inflated diameter just over 18 inches, while the modern replacement for the 20.5 x 8.0-10 which is 205/65-10 would be about 8-1/2 inches wide x 20.4 inches in diameter. If you have the necessary clearance between the inside of your existing tires to accommodate the additional width and the enough ground clearance to handle the fact that the 215/60-8 would lower your pop-up by about an inch, the 215/60-8...
  view full answer...
• Recommended Tires And Wheels To Replace 18.5/8.5-8 Tires On Triton Trailer
  The tire size you can use as a replacement for your triton trailer is a 215/60-8. If you want just the tire, I recommend part # AM1HP28 which is a Load Range D tire. This 8-ply tire has a load capacity of 1,165 lbs at 70 psi. For a Load Range C tire only I recommend part # AM1HP26. This is a 6-ply tire and has a maximum load rating of 935 lbs at 50 psi. Both of these tires are bias-ply tires and will work on the rims you have for your tires. If you are looking for a wheel/tire...
  view full answer...
• Replacement Tire and Wheel for Snowmobile Trailer with Tire Size 18.5x8.5-8
  The tire size of 18.5x8.5-8 that you are looking for is the same size as 215/60-8 which we do have trailer tires in that size like with the part # AM1HP26. Or if you need a wheel and tire combo we have the part # AM3H290 for a 4 lug bolt pattern or part # AM3H310 for a 5 lug bolt pattern.
  view full answer...
• Is There a Larger Tire Size Than 5.70-8 For an 8 Inch Wheel
  The 5.70-8 tire size is about the largest diameter tire available for an 8 inch rim. Your current tire is about 18 inches in diameter and has a tread width of 5.9 inches. A 215/60-8 tire is about the same diameter, but has a wider tread width at 8.9 inches. Because of the increased tire width, you wouldn't be able to reuse your existing wheels. You'd need to go with a wider wheel, or use a wheel/tire combo like part # AM3H290 for a 4 on 4 bolt pattern with a Load Range C tire or # AM3H310...
  view full answer...
• Comparing Tire Sizes For Replacement Trailer Tires Currently Using Size 5.7-8 on Motorcycle Trailer
  Your current 5.7-8 tires are 5.7 inches wide and 18 inches in diameter. Moving to 145/80r12 tires would give you the same width, but a larger diameter of 21.1 inches. If you want to stay with your current size tires I've linked the page to all your options. This will give you a height difference of 3 inches and that reduces your wheel well or fender clearance by 1.5 inches. You need to account for suspension travel, but if you have enough clearance you can swap out your wheels and tires. For...
  view full answer...
• Will a Kenda 215/60-8 Bias Trailer Tire and Wheel Fit the Timbren Axle-Less System part # A12WS545
  Yes, the Kenda 215/60-8 Bias Trailer Tire with 8" White Wheel # AM3H310 is going to fit on the Timbren Axle-Less System part # A12WS545. If you check out the picture I attached you will see that when the Timbren is installed you will have a distance of 6-7/8 inches from the hub face to the trailer frame and the backspacing of the # AM3H310 is 4 inches so there would be more than enough clearance.
  view full answer...
• Trailer Tire And Recommendation For 8x8 Foot Trailer Carrying 2 800cc ATVs
  After some research, I have found that based on the weight of the 2 ATVs and your trailer, a tire with a load range of C (a 6 ply rated tire with a maximum load of 1760 lbs at 50 psi) is a compatible fit for your trailer. The size you referenced 18.5/8.5-8 is an older style of tire sizing. The newer version of that is 215/60-8. If you have trailer built for a 4-bolt wheel, I recommend the Kenda Tire and Wheel # AM3H290. If it is a 5-bolt wheel, I recommend the # AM3H310. Both have...
  view full answer...
• What Is the Widest Trailer Tire That Can Be Used In Place of a 4.80/4.00-8 Trailer Tire
  The widest tire you can use on an 8" diameter x 3-3/4" wide trailer wheel is a 5.70-8 part # AM10010 which is 5.8" wide and will be about 1.2" wider than the 4.80/4.00-8 tire you have now. If you replace both the wheel and tire you could go to a 215/60-8 part # AM3H310 or part # AM3H290 which is 8.9" wide and will be 4.3" wider than the 4.80/4.00-8 tire you have now.
  view full answer...
• Recommended Axle with Hubs and Wheel/Tires for Old Trailer
  The pilot hole size is what makes the wheels difficult to match. We have a few options for 5 lug wheels but they all have the 2.81 inch pilot hole in the center. I recommend changing out your axle as you stated to the Dexter Idler Trailer Axle w/ Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,200 lbs # 20545I-EZ-60-10. This has 48 inch on center spring seats. It also has the hub assemblies and spindles with the EZ-Lube for easy maintenance. Then I recommend the Kenda 215/60-8...
  view full answer...

Do you have a question about this Trailer Tires and Wheel?