Grease Seal Recommendation with OD 2.351 inches and ID 1.712 inches
Updated 09/03/2014 | Published 09/01/2014
Question:
Here are my seal dimensions OD 2.351 ID 1.712 ... WHAT SEAL DO YO ADVISE BUYING? Thank You
asked by: Don C
1
Helpful Expert Reply:
Based on the dimensions you listed, the Grease Seal part # 1105-100-031 would be the correct seal for a replacement.
expert reply by:
Jameson C
1
Product Page this Question was Asked From
Grease Seal - Double Lip - I.D. 1.75" / O.D. 2.356" for HADCO 2R 3.5K Axles
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Single Lip
- 1.75 Inch I.D.
- 2.36 Inch O.D.
- Redline
more information >
Continue Researching
- Q&A: How to Pick Out Replacement Grease Seals for Hadco 3122
- Q&A: Possible Replacement Grease Seal for Hadco 3122
- Q&A: Can Brake Parts be Replaced on Dexter 2,800 Pound Axles with Weld-On Trailer Brake Assemblies
- Q&A: Will Redline Grease Seal # 1105-100-031 Replace Hadco 3122 Grease Seal
- Q&A: PullRite SuperGlide Quick Connect Capture Plate for Trailair Air Ride Pin Box
- Q&A: Once a Trailer Breakaway Switch Pin has Been Pulled is the System Reusable
- Q&A: Recommended 5th Wheel Hitch for a Short Bed Truck w/a Turnover Gooseneck Hitch
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Bleed Your Trailer Surge Brakes
- Article: How to Measure Your Trailer Wheel Bolt Pattern