Grease Seal with 1.750 Inner Diameter and 2.445 Outer Diameter
Updated 10/01/2019 | Published 09/29/2019
Products Featured in This Question
Question:
Got a part number A16817 on old seal ID is for a 1.750” shaft with a OD of 2.445” do you have anything like that
asked by: Natfarrar
0
Expert Reply:
The closest grease seal we have available to the dimensions you listed is the Redline # 1105-100-031, which has a matching 1.750 inch inner diameter but a slightly smaller 2.356 inch outer diameter. I wasn't able to cross-reference the A16817 part number you found with an available grease seal.
Since the outer diameter is pretty close, I just recommend measuring once more (being sure to use a digital caliper like # PTW80157) for verification.
expert reply by:
Chris R
0
Product Page this Question was Asked From
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Single Lip
- 1.75 Inch I.D.
- 2.36 Inch O.D.
- Redline
more information >
Continue Researching
- Q&A: PullRite SuperGlide Quick Connect Capture Plate for Trailair Air Ride Pin Box
- Q&A: How to Pick Out Replacement Grease Seals for Hadco 3122
- Q&A: Will Redline Grease Seal # 1105-100-031 Replace Hadco 3122 Grease Seal
- Q&A: What Bolts And Hardware Do I Need To Install DA75 Demco Brake Actuator DM33CV
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Q&A: Trailer Hub that Fit Axle Spindle that is 1-1/16 inch In Diameter for Both Bearings
- Q&A: How to Confirm Correct Size of Grease Seal
- Q&A: Replacement HADCO Seal ID 2.00 OD 2.87
- Article: Most Popular Wheel Bearings
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Raise Your Travel Trailer Height