See what our Experts say about this Bearing Buddy Trailer Bearings Races Seals Caps

• Bearing Buddy Recommendation for Hub with Bearing Number L68149
  The correct Bearing Buddy to use with the bearing numbers you listed of L44649 and L68149 is the # BB1980A or # BB1980A-SS for stainless steel.
  view full answer...
• Replacement Bearings and Seal for Trailer with LM29749 and L44610 Bearings
  We carry the a grease seal that matches what you have. For that you would want the # BB60002. For the bearings we have the part # 29749 and the race part # 29710. For the other bearing we do not have an exact number match, but based on the race # L44610 that you have the bearing you need is either the # L44643 or # L44649. If the inner diameter of the bearing you have is 1.00 inches measured with a digital or dial caliper you would need part # L44643, if instead it is 1.06 you would...
  view full answer...
• What Seal Is Needed To Replace NAPA Seal 17144 And Can Work With Bearing Buddy Bearing Protectors?
  I do see the NAPA seal 17144 matches the dimensions of the Grease Seal # 58846. Since you are using a Bearing Buddy you are going to want to use one of their seal sets. The seal this size is typically in combination with a Inner Bearing # L68149 which will use the Seal Set # BB60002. This seal set is designed to be used in combination with a Bearing Buddy as it is capable of holding the pressure it creates.
  view full answer...
• Recommended Seal For Bearing Buddy Protectors
  The Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair) # BB1980A-SS are designed for that blue seal to expand and eventually have visible grease around that edge. I've attached a video that shows this installation and grease application for you. The grease needing to be applied almost every trip is not normal, so I recommend the Spindle Grease Seal Set # BB60002 to contain your grease with a tight seal intended for this application.
  view full answer...
• Replacement Bearings for Mobile Home Hub with 1-1/4 Outer and 1-3/8 Inner Bearings
  It sounds like you're trying to replace hubs on a mobile home axle. Mobile home axles are designed for one time use, to transport the mobile home from point A to point B and then intended to be discarded after that. Because of this, replacement parts are rarely available for most mobile home axles and although we don't have a hub that matches the bearing sizes you mentioned, we have replacement bearings that may work to service your existing hub. For a bearing with a 1.375 inch inner...
  view full answer...
• Idler Hubs, Bearings, Seals and Grease For a 2015 V22L ShoreLand'r Boat Trailer
  Thank you for providing all the information. If you are going to replace your entire idler hub you would want the Stainless # KH84545S or Galvanized # DE36VR idlers hubs since its on a boat trailer. These will come with the Inner Race # L68111 and Outer Race # L44610 already in the hub. It will then use the Inner # L68149 and Outer # L44649 bearings along with the Seal Set # BB60002 to work with your Bearing Buddy Protectors # BB1980A-SS. If you are going to reuse your hubs you would...
  view full answer...
• Replacement Bearing, Seals, and Races for ShoreLandr Boat Trailer
  Based on the measurements and bearing numbers you provided me. We have the individual parts you need. You'd want the bearing part # LM67048 and # L68149. Since the inner diameter of bearing # LM67048 is 1.250 inches and the inner diameter of bearing # L68149 is 1.378 inches. The matching race for bearing # LM67048 is # LM67010. And the matching race for bearing L68149 is # L68111. The seal you need is # RG06-050.
  view full answer...
• Recommended Brake Assemblies for Karavan Boat Trailer with 3500 lb Axle
  For your brake assemblies, I recommend the Demco Hydraulic Brake Kit - Free Backing - Galvanized - 10" - Left/Right Hand Assemblies - 3.5K # 40716-15. These galvanized assemblies will work very well for saltwater or freshwater use, resisting corrosion. The free backing design allows you to back up without using the lockout on your coupler. This will absolutely fit your 3500 lb axle. For your Bearing Buddies, bearings, and seals, you very likely have the standard size 84 spindle but...
  view full answer...
  
• Spindle Grease Seal Sleeve For 3,500LB Trailer Axles
  We carry the Bearing Buddy Spindle Grease Seal Set # BB60002 instead of the Dexter sleeve. I do not recommend the Dexter as with the one hole if that sleeve were to spin on the shaft it would block the hole of the EZ lube grease zerk. With the Bearing Buddy kit above you will have to use their Bearing Protectors # BB1980A-SS to grease your bearings but you will have the neoprene seal which is superior to the rubber seals used on typical grease seals. You may need to remove your grease zerk...
  view full answer...
• Does Bearing Buddy Seal Kit # BB60002 Fit 3,500 lb Trailer Axle
  Hey Jon, so the Bearing Buddy seal kit part # BB60002 that you referenced is the correct fit based on your bearing numbers.
  view full answer...
• How to Determine Correct Replacement Bearings and Seal for 2001 Ranger Boat Trailer Hubs
  In order to determine the correct replacement bearings and seal for the hubs on your Ranger Boat Trailer, you will need to first remove the hub assemblies. Once removed, you can check for the bearing numbers, which should be stamped onto the bearings themselves. If you are unable to locate or read the numbers, you can also take a few measurements along the trailer spindle where the bearings and seal sit. I have attached an image that clarifies exactly where these measurements will be taken...
  view full answer...
  
• Bearings & Seals for 2004 EZ Loaded Boat Trailer Using Bearings L68149 and L44649
  We can help you with replacement seals and bearings for your boat trailer and also with replacement hubs if yours are worn or damaged. In general double-lip seals are desirable on boat trailers to help prevent entry of water and the escape of grease. For replacement bearings use parts # L68149 and # L44649 and for a double-lip seal (as supplied by the manufacturer) use part # BB60002. If the races in your hubs are worn or damaged you can replace them too, using parts # L68111 and # L44610. If...
  view full answer...
• Need To Replace Old Grease Seal # 171255
  You will want to match up the old seal with the number stamped on the seal. Each seal number is an indication of a different size seal. The correct # 171255 seal that you will need is Grease Seal - Double Lip, part # 58846. This seal includes the spring that you referred to.
  view full answer...
• Which Replacement Grease Seal with 1.750 Inner Diameter
  The Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2 # RG06-050 is the correct replacement for a 171255TB seal and I'm not seeing a grease seal we have that has a 1.750 ID. You do want a tight seal on your hubs so that the grease is sealed in and water, dust, debris, etc., is kept out, so it might just be that he's having trouble getting it seated properly. With that said, 1.875" ID is the next size up for grease seals and the available replacements would be...
  view full answer...
• What is Purpose of O-Ring that Comes with Spindle Grease Seal Set BB60002
  If you check out the diagram I attached you'll see how the O-ring of the Bearing Buddy Grease Seal set part # BB60002 installs. It's location is designed to compress between the seal ring and grease seal to help prevent the seal from leaking or failing. With Bearing Buddies people tend to put too much grease in the hubs with them so this acts as a way to help brace the seal and prevent failure.
  view full answer...
  
• Replacement Idler Hubs For ShoreLand'r Boat Trailer YAV46TABLW
  The spindle sleeve on your ShoreLand'r boat trailer is essentially the same sleeve you are getting in the Spindle Grease Seal Set # BB60002. You are able to remove the grease seal that comes with the CE Smith Trailer Hub Assembly # CE13511 and replace it with this new seal set. This seal set is also designed to work with the Bearing Buddy Protectors # BB1980A-SS like you would have gotten on the trailer. We do have the Stainless Steel Hub # KH84545S you can add the Inner Bearing # L68149,...
  view full answer...
• Bearing Buddy Spindle Seal Kit For Hub Using L68149 Inner Bearing
  The Bearing Buddy Grease Seal Kit you referenced, part # BB60002 would be the appropriate replacement seal for your hub. It is compatible with your L68149 inner bearing and is the proper replacement for your existing 10-19 seal. The two most common causes of seal failure are 1) Using a single lip seal instead of a double lip and 2) Overfilling the hub (or a combination of the two.) A double-lip seal incorporates a spring into the seal, providing a tighter seal around the spindle. To fill...
  view full answer...
• Where Does O-Ring Install When Using Bearing Buddy Grease Seal BB60002
  If you use the O-ring of the Bearing Buddy grease seal kit you'll want to use the attached diagram to assemble everything. This came straight from Bearing Buddy so hopefully it clears up any confusion. Not every application uses these but if you are using a Bearing Buddy they are recommended since they end up with more pressure in the hub than applications without. Seals do tend to have issues randomly and sometimes its hard to have an exact reason. If you are using a Bearing Buddy typically...
  view full answer...
  
• How do Bearings and Hub Seals Install on a Boat Trailer Hub
  The inner bearing will not ride on the rubber o-ring. The bearing will ride on the spindle and the seal goes just to the outside of it and keeps the grease from leaking out of the hub. To see how it all goes together check out the video I attached.
  view full answer...
• What Grease Cap With Rubber Plug and Stainless Steel Wear Sleeve do I Need for TDE 1750 Hub/Rotor?
  Hello Gary, I can most definitely help you with those part numbers. For the Tie Down Engineering 1750 hub/rotor PN: 46244 you will want the 2" Lubed Dust Cap & Rubber Plug Qty 1 # DC200L-DCRP. For the wear sleeve on the spindle you will want to use the Spindle Grease Seal Set # BB60002. What lake do you usually go out on? What kind of boat do you have? The winter is usually my favorite time to go out and fish, but the sub zero temps in Missouri these last few weekends makes for a solid...
  view full answer...
• Replacement Double Lip Grease Seal For A 2001 Karavan Boat Trailer
  Based on the information you provided the correct grease seal would be the Spindle Grease Seal Set # BB60002, but since you said you were having leakage with a 1.75 ID seal I recommend going with the Grease Seal - Double Lip # 58846. It is slightly smaller but should flex enough to fit and prevent the leakage you've been experiencing.
  view full answer...
• Replacement Bearings, Races, and Seals for LM48548 Inner Bearing and L44610 Outer Race
  For your bearings you will want # LM48548 and # L44649. For your grease seal you will want # BB60002. Then for your races you will want # L44610 and # LM48510.
  view full answer...
• Replacement Grease Seals for Jayco Camper Trailer
  We carry grease seals, bearings, races, grease caps and all similar items for a variety of trailers. Please note that trailer makers typically do not maintain specs for items like seals used in their trailers so knowing the trailer year/make/model, or even the specific VIN, is not usually helpful in finding correct parts. The best way is to find the original item part number. Please refer to the linked photo that shows where to find part numbers on such items. If you can't find a part...
  view full answer...
  
• How to Find the Correct Grease Seal for Trailer Hub Assembly
  Unless you can get the bearing numbers and seal information from the manufacturer, there isn't a way to really find that information without removing the hubs. You don't have to dismantle them if you want to measure the spindle in a couple locations with a digital caliper like # PTW80157. I've attached a video of how to do this. Sometimes there isn't too much wear on the seal and you may be able to read the number on the metal rim. If not, then measuring the spindle and getting as...
  view full answer...
  

Do you have a question about this Trailer Bearings Races Seals Cap?