Will The Spindle Grease Seal Set # BB60002 Work With EZ-Lube Axles
Updated 01/12/2026 | Published 09/06/2024
Products Featured in This Question
Question:
Part number BB60002. Spindle grease seal kit. Will this product work on EZ Lube spindles and are you still able to use the Ez lube feature? Also What is the seal number in this kit? Want to make sure i have the correct one. Thank you.
asked by: Jeromy
Expert Reply:
Hey Jeromy,
The # BB60002 is just a seal that sits at the back of the hub and wouldn't interfere with usage of the EZ-lube fitting. To determine if this is the correct fit you would need to measure your spindle at point B from the diagram below and the inner diameter of the trailer hub's bore hole.
The description is a little confusing but essentially is just saying that this seal would fit if the spindle fit a # LM48548 or # L68149 Inner Bearing and then had either a 1.980, 1.968 or 2.562 Bearing Buddy. While this does have multiple components it's not really a kit, just a 3-piece seal.
(click to enlarge)
Product Page this Question was Asked From
Spindle Grease Seal Set for LM48548 or L68149 Inner Bearing and 1.980, 1.968 or 2.562 Bearing Buddy
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.88 Inch I.D.
- 2.56 Inch O.D.
- Bearing Buddy
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: timken trailer bearings races seals caps
- Search Results: grease seal 10~19
- Search Results: ez lube spindle
- Search Results: ez lube axle
- Search Results: dexter
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Spindle Grease Seal Set for LM48548 or L68149 Inner Bearing and 1.980, 1.968 or 2.562 Bearing Buddy
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Which is Better an EZ Lube Spindle or a Bearing Buddy Setup
- Shop: Timken Grease and Oil Seal - Double Lip - I.D. 1.719" / O.D. 2.565" - 473336
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles
- Shop: Spindle Grease Seal Set for LM67048 Inner Bearing and 2.328 Bearing Buddy
- Search Results: trailer bearings races seals caps
- Search Results: grease seals ~ double lip trailer bearings races seals caps
- Q&A: Recommended Grease Seals For Dexter 9919860 3,500lb Axles
- Video: Spindle Grease Seal Set for L44643 Inner Bearing and 1.980 Bearing Buddy Spec Review
- Q&A: How to Measure a Trailer Spindle
- Q&A: What Seal Is Needed To Replace NAPA Seal 17144 And Can Work With Bearing Buddy Bearing Protectors?
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Replacement Bearing Kit for a 2022 Grand Design Transcend Xplor 265BH
- Article: Trailer Wiring Diagrams
- Q&A: Electric Trailer Jack for 2026 Coleman 13R
- Q&A: Replacing Suspension On 2020 Keystone 210 URS
- Article: Most Popular Wheel Bearings
- Article: Slipper Spring Trailer Suspension System Review
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Boat Trailer Guides: Which are the Best?
Samuel C.
1/12/2026
Hey Jeromy, how did things go with the BB60002 seal on your EZ Lube spindles? Once you took those spindle and hub measurements, did it turn out to be the right fit? Your update could make it easier for the next person checking compatibility.