How to Determine Correct Replacement Bearings and Seal for 2001 Ranger Boat Trailer Hubs

Updated 04/02/2018 | Published 03/30/2018

Products Featured in This Question

Spindle Grease Seal Set for LM48548 or L68149 Inner Bearing and 1.980, 1.968 or 2.562 Bearing Buddy

(418)

$23.76

4" Carbon Fiber Digital Caliper

(27)

$12.32

Question:

Have a Ranger Boat with Cool Hubs on the trailer. Need to replace the bearings and seal. Can you give me the part number for the trailer. Boat 2001 518VX

asked by: Dave B

Expert Reply:

In order to determine the correct replacement bearings and seal for the hubs on your Ranger Boat Trailer, you will need to first remove the hub assemblies. Once removed, you can check for the bearing numbers, which should be stamped onto the bearings themselves. If you are unable to locate or read the numbers, you can also take a few measurements along the trailer spindle where the bearings and seal sit. I have attached an image that clarifies exactly where these measurements will be taken and the particular bearing each location will reference. I recommend using a digital caliper like # PTW80157.

I have attached a link that will take you to our available selection of bearings and seals. You can use the facets on the left side of the page to filter through the different inner diameters once you have made these measurements. I have also attached a couple articles on trailer hub bearings that you might find helpful.

expert reply by: Chris R